STANLEY 2-86-694 Deep Hole Angled Spanner 17MM - Industrial Supply

A 17 mm deep hole angled spanner designed for loosening or tightening fasteners located inside recessed housings where standard spanners cannot reach.

STANLEY 2-86-694 Application Context & Use Cases

Deep hole angled spanners are used where conventional open-end or ring spanners cannot reach recessed fasteners due to depth constraints or obstructed tool access.
Typical Operational Scenarios
Automotive Engine Maintenance
Technicians frequently encounter recessed bolts within engine blocks, cylinder assemblies, and mounting frames. The angled design enables engagement without dismantling surrounding components.
Industrial Equipment Maintenance
Machinery such as compressors, pumps, and gearboxes contain structural frames where fasteners sit deep inside casings. Maintenance personnel rely on deep hole spanners to access these locations safely.
Fabrication & Structural Assembly
During installation of steel frameworks or mechanical assemblies, bolts are sometimes positioned within structural channels or cavities. Deep hole angled spanners allow technicians to apply torque without modifying the assembly.
Heavy Equipment Servicing
Equipment used in construction, mining, and manufacturing often contains recessed mounting points where access is limited.
Common Industries Using Deep Hole Spanners
Automotive service workshops
Industrial maintenance departments
Heavy machinery repair facilities
Fabrication and mechanical assembly units
Infrastructure and construction contractors

Selection Guidance

Selecting the correct deep hole angled spanner requires verifying three key parameters.
Fastener Size Compatibility
Ensure the fastener head dimension is exactly 17 mm. Using incorrect sizing can lead to tool slippage or fastener damage.
Depth of Fastener Position
This tool is intended for situations where:
The bolt head is located inside a deep cavity
Standard spanners cannot reach due to structural barriers
Access Angle Requirements
If the fastener cannot be accessed vertically because of surrounding components, the angled design allows torque application from an offset position.

Capacity / Calculation Example

Real-World Maintenance Scenario
Consider an industrial pump assembly where a mounting bolt is positioned 70 mm inside a housing cavity.
Standard spanners fail due to limited reach.
Using a deep hole angled spanner allows the technician to:
Insert the tool into the cavity.
Align the 17 mm head with the bolt.
Apply torque from an external angle.
This reduces the need to dismantle adjacent equipment components.

Failure Conditions & Misuse Risks

Improper use of deep hole spanners can result in tool or fastener damage.
Incorrect Size Selection
Using a spanner that does not match the fastener size may round off bolt edges.
Excessive Torque Application
Deep hole spanners are designed for controlled torque. Applying excessive leverage can deform the tool or damage fasteners.
Misaligned Engagement
The spanner must fully engage the fastener head before applying force.
Using the Tool as a Lever
Deep hole spanners should not be used as pry bars or impact tools.

Material / Compatibility Table

Fastener Material Compatibility
Compatible Applications

Environmental Suitability
Operating Conditions

Operational Handling & Installation Considerations

Proper Tool Engagement

The spanner should fully seat onto the fastener before torque is applied. Partial engagement may cause slippage.
Access Clearance
Ensure sufficient clearance around the cavity opening to insert the spanner without obstruction.
Controlled Torque Application
Apply steady torque rather than sudden impact force.
Storage & Maintenance
Store the tool in dry tool storage environments to maintain surface protection.

Commercial Clarity

This page represents supply availability for the STANLEY 2-86-694 Deep Hole Angled Spanner 17 mm across India.
Lead Time
Lead times depend on stock availability and shipping destination.
Typical dispatch timelines are coordinated based on order confirmation.
Dispatch Capability
Pan-India shipping is supported through industrial logistics networks.
Minimum Order Quantity (MOQ)

Customization Availability
This is a standard manufacturer-defined tool. Custom modifications are not applicable.
Compliance / Certification
The tool is manufactured according to standard industrial tool manufacturing specifications.
Tender Compatibility
Suitable for inclusion in industrial procurement or maintenance supply tenders where branded tools are specified.

Procurement Process

How to Enquire
Industrial buyers can request supply by providing basic procurement details.
Required Information
To process enquiries efficiently, buyers should provide:
Product model: 2-86-694
Required quantity
Delivery location
Procurement urgency
Company details for invoicing

Comparison Table

Deep Hole Angled Spanner vs Other Spanner Types

Selection Checklist

Before purchasing, confirm the following:
Fastener size is 17 mm
Fastener is located inside a deep cavity
Angled access is required
Application does not require torque wrench control
Tool will be used in mechanical or industrial maintenance
If all conditions are satisfied, this spanner is appropriate for the application.

High-Intent FAQs

Is the 17 mm deep hole angled spanner suitable for automotive engines?

Yes. It is commonly used to access recessed bolts within engine assemblies where conventional spanners cannot reach.

Can this tool replace a socket wrench?

No. Socket wrenches are designed for higher torque and controlled fastening. Deep hole spanners are primarily for access-restricted fasteners.

Is the product supplied as original branded tooling?

Industrial procurement generally requires authentic branded tools. Buyers typically specify part numbers such as 2-86-694 to ensure correct supply.

Can distributors purchase this tool in bulk quantities?

Yes. Bulk procurement is common for tool distributors and maintenance supply vendors.

Is the spanner suitable for stainless steel fasteners?

Yes. The tool can be used with standard stainless steel hex fasteners of compatible size.

What industries typically purchase deep hole spanners?

Automotive service workshops, industrial maintenance teams, fabrication companies, and equipment servicing providers.