STANLEY 72-069 Deep Offset Bi-Hex Ring Spanner 41x46mm - Pan India Supply

STANLEY 2-069 Deep Offset Bi-Hex Ring Spanner 41x46mm Application

The 41x46mm size is not a general workshop tool. It is typically specified for large fasteners in:

• Power generation plants (turbine casing bolts, structural base bolts)
• Steel and heavy fabrication units
• Mining and earthmoving equipment
• Infrastructure and bridge projects
• Cement and process plants
• Large compressor and pump assemblies

Where Deep Offset Design Becomes Necessary

• When bolt heads are recessed below surface level
• When clearance around nut/bolt is restricted
• When adjacent surfaces obstruct straight ring access
• When socket + extension is not feasible

The deep offset geometry allows controlled engagement without rounding the fastener under high load.

Selection Guidance (How to Choose Correctly)

Before procurement, confirm:

1. Exact fastener head size (measure across flats, not corners)
2. Whether clearance requires deep offset design
3. Required torque range
4. Bolt material and grade
5. Access limitation around fastening point

This SKU should be selected only when:

• Both 41mm and 46mm fasteners are present in application
• Offset clearance is mandatory
• Controlled torque transmission is required

Do not substitute flat ring spanner if clearance is constrained.

Capacity & Real-World Torque Consideration

Practical Torque Logic
For a 41mm or 46mm industrial hex fastener:

• Typically associated with high tensile structural bolts (M27–M30 equivalent across flats depending on standards)
• Often torqued in high-load structural assemblies

Torque values depend on bolt grade and lubrication condition. As a practical example:
Example Scenario

Values indicative. Final torque depends on grade, lubrication, and engineering specification.
The spanner must withstand manual torque application without deformation. Use extension pipes only within safe mechanical limits.

Failure Conditions & Misuse Risks

Improper usage leads to:

• Rounding of bolt head (incorrect size)
• Ring distortion (over-extension beyond tool rating)
• Surface cracking (shock hammering misuse)
• Slippage under oil contamination

High-Risk Practices

• Using hammer blows on non-striking spanner
• Using incorrect size (40mm on 41mm)
• Using pipe extensions without torque control
• Engaging partially on fastener

Correct engagement requires full seating of ring over bolt head.

Who Should NOT Buy This

This spanner is not suitable for:

• Light workshop applications
• Automotive retail use
• DIY usage
• Applications below 30mm fastener size
• Users requiring ratcheting function
• Torque-controlled calibrated tightening (use torque wrench instead)

It is designed for heavy manual industrial fastening.

Material & Compatibility Table

Fastener Compatibility
Engagement Matrix

 Operational Handling & Usage Considerations

• Ensure full ring seating before applying load
• Maintain clean contact surface
• Avoid impact use unless tool is rated for striking
• Store in dry industrial storage
• Inspect ring profile periodically for wear

For shutdown maintenance, ensure tool inspection before deployment.

Commercial Clarity

Lead Time

• Ready stock subject to availability
• Standard dispatch within 24–72 working hours

Dispatch Capability

• Pan India shipping via insured logistics
• Bulk dispatch supported
• Industrial packaging provided

MOQ

• Single piece supply available
• Bulk quantities supported for MRO contracts

Customization

• No modification of original STANLEY tool
• Bulk procurement structuring possible

Compliance & Certification

• GST-compliant invoicing
• Authentic branded product supply
• Procurement documentation support available

Tender Compatibility

• Can be supplied under industrial procurement tenders
• Documentation support for compliance submission

Procurement Process

To avoid delays, provide:

• Exact SKU: 72-069
• Required quantity
• Delivery location
• GST details
• Required dispatch timeline
• Any tender reference (if applicable)

RFQ process:

1. Submit enquiry with SKU and quantity
2. Stock confirmation issued
3. Commercial quotation shared
4. GST invoice raised upon order confirmation
5. Dispatch tracking provided

Comparison Table – Common Alternatives

Functional Comparison

This SKU is selected when clearance + manual torque strength are primary factors.

Selection Checklist

Before placing order, confirm:

•  Fastener size verified as 41mm and/or 46mm
•  Deep offset access required
•  High manual torque application expected
•  Industrial-grade tool required
•  GST invoice required
•  Pan-India dispatch required

If all conditions are satisfied, SKU 72-069 is suitable.

High-Intent FAQs

1. Is this an original STANLEY 72-069 spanner?

Yes. Supplied as genuine branded product with proper invoicing and traceable procurement channel.

2. Can it handle heavy structural bolt tightening?

Yes, provided torque application remains within safe manual mechanical limits.

3. Is this suitable for turbine casing bolts?

Yes, if bolt head sizes match 41mm or 46mm and offset clearance is required.

4. Can I use pipe extension for higher torque?

Mechanical extension may be used cautiously. Excessive force may damage tool or fastener.

5. Is single piece purchase allowed?

Yes. No mandatory bulk quantity requirement.

6. Do you provide GST invoice?

Yes. All supplies are GST-compliant.

7. What is the dispatch timeline?

Subject to stock confirmation, typically within 24–72 working hours.