STANLEY 72-064 Double Ended Open Jaw CRV Spanner 46x50mm

The STANLEY 72-064 double-ended CRV spanner is built to deliver dependable torque handling for large fasteners in demanding industrial maintenance environments.

STANLEY Double Ended Open Jaw CRV Spanner Application & Use

Where This Size Is Typically Used?
The 46x50mm configuration is not a general-purpose workshop tool. It is commonly deployed in:

• Structural steel erection
• Heavy fabrication yards
• Power plant maintenance
• Mining equipment servicing
• Large pump and valve assembly
• Industrial gearbox mounting
• EPC project site mobilization kits

Fastener Range Compatibility     

• 46mm hex bolts and nuts (M30–M33 class applications depending on design)
• 50mm hex bolts and nuts (heavy structural fastening)

This spanner is typically used where:

• Access is restricted (socket use not feasible)
• Field adjustments are required
• High-torque manual leverage is necessary

Selection Guidance STANLEY Spanner 46x50mm

How to Confirm This Is the Correct Size
Before procurement, confirm:

• Nut flat-to-flat measurement (46mm or 50mm)
• Access clearance (open-end suitability)
• Torque requirement range
• Frequency of use (routine vs shutdown-specific)

If bolt head access allows socket use and torque control is critical, consider impact socket alternatives. If access is lateral or partial, open jaw is appropriate.

Capacity & Real-World Torque Logic

Manual Torque Consideration
Manual torque applied depends on:

• Handle length
• Operator force
• Friction condition

Example Logic:
If operator applies ~400N force at handle end:

• With ~500mm effective length,
• Approx torque = 400N × 0.5m = 200 Nm

This is field logic only. Final torque depends on:

• Fastener class
• Lubrication
• Required tightening specification

This spanner is suitable for loosening high-load structural nuts where controlled torque wrenching is not mandatory.

Failure Conditions & Misuse Risks

Improper usage may lead to:

• Jaw spreading due to overload
• Rounding of nut edges
• Slippage injury
• Micro-cracks due to hammer striking

Avoid:

• Using extension pipes beyond design leverage
• Hammering on open jaw ends
• Using for impact wrench substitute
• Engaging partially seated nuts

This is a manual tool, not an impact-rated component.

Material & Compatibility Table

Chrome vanadium construction supports high mechanical strength under repeated use.

Operational Handling Considerations

• Ensure full jaw seating before applying force
• Maintain tool clean and free of oil before use
• Store in dry industrial tool racks
• Avoid heat exposure beyond normal ambient industrial conditions
• Inspect jaw edges periodically for wear

Proper handling increases service life and reduces fastener damage.

Commercial Clarity

Lead Time
Ready stock subject to availability. Typical dispatch window: 24–48 working hours.
Dispatch Capability
Pan-India dispatch via surface and express logistics.
MOQ
No strict MOQ for standard procurement. Bulk quantities supported for project requirements.
Customization
This is a standard SKU. No modification or private labeling.
Compliance

• Supplied with GST invoice
• Suitable for industrial procurement documentation
• Model-specific billing clarity

Tender Compatibility
Model number 72-064 can be referenced in BOQ submissions. Bulk supply supported for EPC and PSU requirements.

Procurement Process

What to Provide During Enquiry
To avoid delay, share:

• Required quantity
• Delivery location (City / State)
• GST details
• Required delivery timeline
• If for tender: BOQ reference

Procurement Flow

1. Enquiry received
2. Stock confirmation
3. Commercial quotation issued
4. Payment confirmation
5. Dispatch with tracking details

Direct commercial contact available for urgent shutdown requirements.

Comparison Table

46x50mm vs Common Alternatives

Correct sizing eliminates rounding risk and safety exposure.

Selection Checklist

Before confirming order, validate:

•  Nut size confirmed (46mm / 50mm)
•  Open-end access required
•  Manual torque application acceptable
•  Industrial environment (non-sparking not required)
•  Quantity requirement confirmed
•  Delivery timeline aligned

This reduces return and mismatch issues.

High-Intent FAQs

1. Is this genuine STANLEY product?
Supplied as branded STANLEY 72-064 model with proper invoicing. Model clarity provided in documentation.
2. Is bulk quantity available for project supply?
Yes. Bulk supply supported subject to stock confirmation.
3. Can this be dispatched urgently?
Standard dispatch within 24–48 working hours, depending on stock and location.
4. Is this suitable for high tensile bolts?
Yes, for manual tightening/loosening. For calibrated torque application, use torque wrench systems.
5. What is the warranty?
Standard manufacturer warranty as applicable to hand tools.
6. Do you supply across India?
Yes. Dispatch supported across major industrial cities and project sites.
7. Is price inclusive of GST?
Quotation issued with GST breakdown.