Balluff, BNS0106, BNS 813-D04-R12-100-10-01 Supplier

Indus Megamart supports supplier and distributor-level availability across Pan India, subject to stock status, quantity, commercial confirmation, and delivery location.

What is Balluff, BNS0106, BNS 813-D04-R12-100-10-01?

Balluff, BNS0106, BNS 813-D04-R12-100-10-01 is a BNS 813 safety and position switch used to monitor machine guards, access doors, protective covers, and enclosure positions. It should be selected by matching the complete code because D04-R12-100-10-01 variants may differ from similar BNS 813 models in installation and circuit suitability.
The project input mentions inductive sensor, but the BNS 813 reference should be treated as a safety or position switching product family rather than a standard proximity sensor. This distinction is important because procurement should not be based only on sensing category or visual similarity.
For replacement use, the full model reference matters. The R12 portion may indicate a specific orientation, actuation, connection, or configuration requirement depending on the installed design. Buyers should verify the existing product label, machine manual, wiring diagram, and spare part list before approving substitution.

Applications of Balluff, BNS0106, BNS 813-D04-R12-100-10-01

Machine Guard Door Monitoring
Used where a machine guard or access door must be monitored before machine operation continues. It helps the control system identify whether the guarded point is in the required position.
Protective Cover Feedback
Useful for covers on cutting, pressing, forming, packaging, or indexing machinery where maintenance teams need reliable position feedback.
Access Panel Detection
Applied on panels opened during cleaning, tool adjustment, lubrication, inspection, or component changeover.
Automated Fixture and Jig Safety Points
Relevant in automation cells where operators interact with fixtures, clamps, or guarded loading zones.
Machine Enclosure Position Confirmation
Used on machine enclosures where door or cover status must be part of the machine sequence.
Exact-Code Maintenance Replacement
Selected when an existing installed component or OEM spare list specifically mentions BNS0106 or BNS 813-D04-R12-100-10-01.

Industries Using Balluff, BNS0106, BNS 813-D04-R12-100-10-01

Automotive Component Plants
Used on guarded assembly stations, testing fixtures, press-side access points, and automated component handling cells.
Packaging and FMCG Units
Suitable for machines where guards and covers are opened frequently during changeover or cleaning.
Machine Tool and Metal Processing Units
Used on enclosed cutting, forming, drilling, and machining equipment where door feedback is required.
Pharmaceutical and Process Equipment
Relevant where access covers and machine panels are opened during inspection, cleaning, or batch transition.
General Industrial Automation
Used by maintenance stores and automation contractors managing multiple BNS 813 variants across machines.

Operational Considerations

Balluff, BNS0106, BNS 813-D04-R12-100-10-01 should be checked as part of the machine safety and position feedback circuit. A wrong variant can cause mounting mismatch, actuator misalignment, wiring incompatibility, or commissioning delay.
Before ordering, confirm:
Complete installed model number
Order code BNS0106
D04-R12-100-10-01 sequence
Actuator approach direction
Mounting position
Wiring or connector requirement
Existing control circuit
Machine make and model
Required quantity
Delivery city and urgency

Customization Options

Indus Megamart supplies this product as a standard catalog item. Customization is not available.
If the installed machine requires a different contact arrangement, actuator direction, connection style, suffix, or mounting format, the correct alternate BNS 813 model should be selected rather than modifying the product.

Product Supply & Distribution Capability

Indus Megamart supports supply and distribution enquiries for BNS 813 safety switches and related automation components. The company assists buyers with model identification, quotation, availability checks, and dispatch coordination.
Company details can be reviewed at about us.
Operational base location has not been specified in the input. Add the verified office, warehouse, or dispatch location before publishing this page.

Supply Across India

Indus Megamart supports Pan India supply for industrial buyers, contractors, OEM service providers, and maintenance teams. Dispatch timelines depend on stock availability, order quantity, billing details, and destination.
Supply support may cover Delhi NCR, Noida, Faridabad, Gurugram, Pune, Mumbai, Ahmedabad, Vadodara, Bengaluru, Chennai, Hyderabad, Coimbatore, Nashik, Jaipur, Indore, Kolkata, Ludhiana, and other industrial regions.

How to Choose the Right Balluff, BNS0106, BNS 813-D04-R12-100-10-01

Use this buyer checklist before raising a purchase order:
Match order code BNS0106
Confirm full model BNS 813-D04-R12-100-10-01
Do not select by partial code only
Check R12 orientation or configuration requirement
Compare the old switch label
Review machine spare list
Confirm actuator and mounting alignment
Check wiring or connector format
Confirm required quantity
Share delivery location and urgency
Relevant supporting cluster guides:
BNS 813 Safety Switch Applications Guide
BNS 813 Product Selection Guide
BNS 813 Variant Comparison Guide
Safety Switch Price and Cost Factors Guide
Mechanical Safety Switch Installation Guide
Machine Guard Switch Maintenance Guide
Industrial Machine Guarding Use Case Guide

Comparison Table

BNS 813 model codes may look similar, but suffix changes can affect suitability.

Typical Use Case Scenarios

Breakdown Replacement on Guarded Equipment
A machine stops because a guard position switch is damaged. The maintenance team identifies BNS0106 on the installed label and requests the same code.
OEM Spare Procurement
An OEM service engineer recommends BNS 813-D04-R12-100-10-01 from a machine spare list for planned service replacement.
Automation Cell Maintenance
A plant uses the switch on a guarded loading or inspection zone where access position must be monitored before the next machine cycle.
Inventory Control for Similar BNS Models
A maintenance store separates BNS0106 from D12 and D02 variants to prevent accidental issue of a near-match part.

Procurement Process

For quotation, share:
Product name
Order code BNS0106
Full model BNS 813-D04-R12-100-10-01
Required quantity
Delivery city and state
Installed product photograph
Machine type
Urgency level
Billing and shipping details
Contact page:

Common Buyer Concerns Before Ordering

Can a similar BNS 813 switch be used?
Only after technical verification. Similar BNS 813 switches may differ in mounting, actuation, wiring, contact arrangement, or suffix configuration.
Is this product customized?
No. It is supplied as a standard catalog item. If another configuration is needed, select the correct alternate model.
Why is the full model code important?
Because BNS 813 variants can share similar body styles but differ in functional suitability. Full-code matching reduces procurement and installation risk.
What should be checked before installation?
Check actuator alignment, wiring, mounting position, machine response, and safety circuit behavior before returning the machine to use.

Frequently Asked Questions

What is Balluff, BNS0106, BNS 813-D04-R12-100-10-01 used for?

Balluff, BNS0106, BNS 813-D04-R12-100-10-01 is used for machine guard, access door, and protective cover position monitoring. It is commonly ordered as an exact-code replacement where the installed machine or OEM spare list specifies this BNS 813 model.

Is BNS0106 an inductive sensor?

The input category mentions inductive sensor, but BNS 813 should be evaluated as a safety or position switch family. Buyers should check installation, actuator movement, wiring, and machine safety circuit compatibility rather than treating it as a standard proximity sensor.

Can BNS0106 replace another BNS 813 variant?

Not automatically. Even within the BNS 813 family, code differences such as D04, R12, 100, 10, and 01 may affect suitability. Always compare the complete installed code and machine documentation before substitution.

What information is needed for a price enquiry?

Share the order code BNS0106, full model number, required quantity, delivery city, and urgency. A clear photo of the installed switch label helps reduce the risk of selecting a similar but incorrect variant.

Does Indus Megamart supply BNS0106 across India?

Yes. Indus Megamart supports Pan India supply for standard industrial automation and safety switching products. Final availability, pricing, and dispatch schedule depend on stock position, quantity, delivery location, and commercial confirmation.

Is customization available for this model?

No. Customization is not available. If the machine requires a different connection, contact configuration, suffix, or mounting arrangement, the buyer should select the correct alternate BNS 813 model.

Who should install this switch?

Installation should be handled by a qualified maintenance engineer, automation technician, electrician, or OEM service professional. After replacement, actuator alignment, wiring, and machine response should be checked before normal operation resumes.

Request a Quote for Balluff, BNS0106, BNS 813-D04-R12-100-10-01

For pricing, availability, and Pan India dispatch support, contact Indus Megamart with the complete model code, order quantity, delivery location, and application details. As a supplier and distributor, Indus Megamart supports procurement coordination for standard industrial safety switching products.

Contact: