Balluff BNS02E5 BNS 813-B02-D12-61-A-10-01 Supplier & Distributor

Indus Megamart supports Pan-India supply coordination for standard industrial automation components.

What is Balluff BNS02E5 BNS 813-B02-D12-61-A-10-01?

Balluff BNS02E5 BNS 813-B02-D12-61-A-10-01 is a mechanical multiple-position limit switch with safety switch positions. It detects defined machine movement through chisel-style mechanical actuation and provides switching feedback to PLC inputs, relay circuits, and industrial machine control systems.
This model belongs to the BNS mechanical limit switch range. Official product information identifies BNS02E5 as a mechanical multiple-position limit switch with safety switch positions, 79 x 36 x 63 mm dimensions, anodized aluminium housing, 2x chisel switching positions, vertical installation, screw terminal connection, IP67 protection, and EN 60204-1 safety version reference. It is listed with 250 V AC rated operating voltage and 6 A continuous current for the switch positions.
In practical terms, this product is selected where a moving cam, actuator, stop, guard, or machine member must physically operate the switch at defined positions. The B02 compact frame and 2-position layout make it suitable for applications where space, mounting orientation, and exact replacement matching matter during procurement.

Applications of Balluff BNS02E5 BNS 813-B02-D12-61-A-10-01

1. Compact machine stop confirmation

BNS02E5 can be used where a small machine stop or mechanical travel limit must confirm its position before the control system permits the next cycle step. The chisel-style switching format suits defined contact actuation.

2. Guarded equipment position monitoring

Sliding guards, covers, or access points may require physical position feedback. The switch can support machine monitoring where safety-related switch positions are part of the complete machine design.

3. Small transfer mechanism feedback

Compact shuttle units, short-stroke transfer arms, and small guided carriages often need end-position confirmation. This model can help verify movement completion in space-restricted machine areas.

4. Packaging machine auxiliary motion

Packaging machines use smaller mechanical assemblies such as guides, pushers, flap folders, and reject stops. Contact-based switching helps confirm that these parts have reached their intended positions.

5. Machine tool support movement

Tool changers, chip doors, auxiliary clamps, and support slides may need reliable position confirmation. This product can be evaluated where a mechanical limit switch is preferred over non-contact sensing.

6. Retrofit replacement in existing equipment

Where an installed machine already uses BNS 813-B02-D12-61-A-10-01, procurement teams can source the same model to reduce redesign risk, subject to model, wiring, mounting, and switching verification.

7. Control panel and relay circuit integration

This switch may be evaluated for systems where feedback is routed into PLC inputs, relay logic, or existing machine control circuits requiring mechanical switch signals.

Industries Using Balluff BNS02E5 BNS 813-B02-D12-61-A-10-01

Balluff BNS02E5 is relevant for industries that operate machines with defined mechanical movement and repeatable position feedback requirements. Typical sectors include:

• Automotive component production
• Packaging machinery and FMCG plants
• Machine tool maintenance
• Metal fabrication and forming shops
• Material handling automation
• Assembly-line equipment
• Industrial machinery repair
• Process equipment support
• OEM machine building
• Plant retrofit and modernization projects

This product is especially useful where buyers require a compact mechanical multiple-position limit switch instead of a general-purpose inductive sensor. The difference matters because mechanical switches depend on physical actuation, while inductive sensors detect metallic targets without contact.

Operational Considerations

Balluff BNS02E5 should be selected only after reviewing the machine’s actuation path. The switch uses chisel-style mechanical positions, so the cam or moving part must approach the switch correctly. Misalignment can lead to early switching, delayed switching, uneven wear, or unreliable feedback.
Vertical installation is a key procurement factor. A visually similar switch may not fit the same machine layout if the mounting orientation or approach direction differs. Buyers should check mounting holes, reference edge, plunger spacing, cable routing, terminal access, and available machine clearance.
Environmental conditions also need review. IP67 protection supports many industrial settings, but the installation should still avoid direct impact, uncontrolled vibration, cable strain, coolant pooling, and mechanical abuse. For safety-related applications, the complete machine circuit, risk assessment, control logic, and installation method should be reviewed by the responsible engineer.

Customization Options

Indus Megamart supplies and distributes Balluff BNS02E5 in standard product configuration. Customization is not offered for this product.
Buyers requiring another actuator style, number of switching positions, mounting orientation, connection type, or switch spacing should compare related BNS models before purchase. For replacement requirements, the safest method is to match the full model code and verify compatibility with machine documentation.

Product Supply & Distribution Capability

Indus Megamart operates as a supplier and distributor of industrial automation products. The company supports procurement of Balluff BNS02E5 for maintenance, OEM, project, and plant-level purchase requirements across India.
Supply support may include:

• Product availability checks
• Replacement part sourcing
• Model-code confirmation assistance
• Bulk enquiry handling
• Dispatch coordination
• Procurement support for related automation components
• Assistance in comparing nearby BNS models

Buyers can review company details at https://www.indusmegamart.com/about-us.

Supply Across India

Indus Megamart supports Pan-India supply of Balluff BNS02E5 BNS 813-B02-D12-61-A-10-01. Enquiries can be coordinated for industrial buyers in Delhi NCR, Haryana, Uttar Pradesh, Punjab, Rajasthan, Gujarat, Maharashtra, Karnataka, Tamil Nadu, Telangana, Andhra Pradesh, West Bengal, Madhya Pradesh, Odisha, Chhattisgarh, Kerala, and other industrial regions.
The company’s operational base is used for industrial supply coordination, enquiry handling, dispatch planning, and procurement communication. Delivery timelines may depend on product availability, quantity, buyer location, and sourcing status.

Export Capability

Export capability is not declared in the project input. This page should position Indus Megamart for Pan-India supply only. International export claims should not be added unless confirmed by the company.

How to Choose the Right Balluff BNS02E5 BNS 813-B02-D12-61-A-10-01

Use this buyer checklist before ordering:

• Confirm the complete model code: BNS 813-B02-D12-61-A-10-01
• Verify whether the machine requires 2 chisel switching positions
• Check vertical installation suitability
• Match longitudinal approach direction with the machine cam path
• Confirm 12 mm switch position spacing
• Review rated voltage and current against the control circuit
• Check screw terminal wiring requirements
• Compare the 79 x 36 x 63 mm size with available space
• Confirm IP67 suitability for the operating environment
• Validate safety-related use with the machine safety engineer
• Keep old switch photos, wiring details, and machine drawings ready

A product selection guide can internally link here using anchors such as Balluff BNS02E5 supplier, compact mechanical limit switch, and BNS 813 series position switch.

Comparison Table

The table below helps buyers compare BNS02E5 with nearby machine position detection options.

Typical Use Case Scenarios

Compact machine guard confirmation

A guarded access section must confirm a closed or engaged position before the equipment cycle continues. BNS02E5 can support the feedback requirement when integrated correctly into the complete machine circuit.

Short-stroke shuttle movement detection

A compact shuttle transfers components between two close positions. The switch provides mechanical feedback when the shuttle reaches the defined travel point.

Packaging stop position monitoring

A small stop mechanism in a packaging line must confirm engaged or released status. Contact-based switching helps the controller avoid incorrect product movement.

Planned maintenance replacement

A maintenance team identifies BNS 813-B02-D12-61-A-10-01 on an installed machine. Matching the same model can reduce installation changes during planned shutdown work.

Procurement Process

For ordering Balluff BNS02E5 through Indus Megamart:

1. Share the full product code and model number.
2. Provide existing part photos or machine details for replacement enquiries.
3. Confirm required quantity and delivery location.
4. Request availability and commercial details.
5. Verify technical compatibility with the installed machine.
6. Finalize procurement and dispatch coordination.

For pricing, availability, and procurement discussion, use

Common Buyer Concerns Before Ordering

A common concern is whether BNS02E5 can replace another BNS model. Replacement should not be assumed unless the switching positions, actuator type, installation orientation, wiring, voltage rating, and machine interface match.
Another concern is whether this product is an inductive sensor. It is not. BNS02E5 is a mechanical multiple-position limit switch that requires physical contact from a cam or moving machine part.
Buyers also ask whether it is suitable for safety-related positions. The product is listed with safety switch positions, but machine-level suitability depends on the full safety circuit, risk assessment, installation method, and control system design.

Frequently Asked Questions

What is Balluff BNS02E5 used for?

Balluff BNS02E5 is used for mechanical position monitoring in industrial machines. It helps detect defined positions of cams, stops, guards, slides, and small moving assemblies. The switching feedback can be used by PLCs, relay circuits, or machine control systems.

Is Balluff BNS02E5 an inductive sensor?

No. BNS02E5 is a mechanical multiple-position limit switch, not an inductive sensor. It operates through physical actuation by a cam or moving machine part. Inductive sensors detect metallic targets without direct contact, so they are not direct substitutes in many machines.

How many switching positions does BNS 813-B02-D12-61-A-10-01 have?

The official product information identifies this model with 2x chisel switching positions. This configuration is useful where two defined mechanical positions must be detected from a compact switch arrangement, subject to correct installation and machine compatibility.

Can BNS02E5 be used as a replacement part?

Yes, it may be sourced as a replacement part when the installed machine uses the same model or a verified equivalent. Buyers should confirm the complete model code, mounting orientation, actuator style, wiring, electrical ratings, and switch spacing before ordering.

What should be checked before installation?

Check vertical mounting suitability, longitudinal approach direction, cam alignment, chisel contact path, terminal access, cable routing, environmental exposure, and switching sequence. Mechanical limit switches depend heavily on correct installation geometry for reliable operation.

Does Indus Megamart customize Balluff BNS02E5?

No. Indus Megamart supplies and distributes the standard Balluff BNS02E5 product. Customization is not offered. Buyers requiring another configuration should compare related BNS models before procurement.

Is BNS02E5 suitable for harsh industrial environments?

The official product information lists IP67 protection, anodized aluminium housing, and an ambient temperature range of -5 to 85 °C. Final suitability depends on installation quality, impact risk, vibration, cable protection, coolant exposure, and maintenance access.

How can buyers get price and availability?

Buyers can contact Indus Megamart through https://www.indusmegamart.com/contact-us with the product code, required quantity, delivery location, and application details. The team can support pricing enquiries, availability checks, and Pan-India supply coordination.

Request a Quote for Balluff BNS02E5 BNS 813-B02-D12-61-A-10-01

Indus Megamart supplies and distributes Balluff BNS02E5 BNS 813-B02-D12-61-A-10-01 for industrial buyers across India. For pricing, availability, replacement matching, and procurement coordination, contact the team.
Trust Line: Indus Megamart supports supply and distribution only. No manufacturing or customization claims are made for this product.

Contact Information

Company: Indus Megamart
Business Type: Supplier and Distributor
Service Coverage: Pan India
About Page:
Contact Page:
Use the contact page for:

• Pricing enquiries
• Technical discussion
• Availability checks
• Replacement part matching
• Bulk order support
• Project procurement discussion