STANLEY 70-388E 20x22mm Shallow Offset Bi-Hex Ring Spanner in Delhi

STANLEY 70-388E Price in Delhi

Current National Product Detail Page price: ₹1,617 including GST.
Displayed base price: ₹1,370 + ₹247 GST @18%.
The current Indus MegaMart listing is for a pack of 10 pieces.
Stock and delivery information should remain dynamic because availability and lead time may change before the order is placed.
Check Current Price & Buy STANLEY 70-388E

What Is the STANLEY 70-388E?

STANLEY 70-388E is a double-ended shallow-offset metric ring spanner with 20 mm and 22 mm ring sizes.
Both ends use a bi-hex, or 12-point, ring profile. The closed ring surrounds a correctly sized fastener head, while the shallow-offset geometry positions the handle away from the fastener plane to provide additional hand and handle clearance.
This makes the model relevant where fixed 20 mm and 22 mm ring engagement is required together with moderate clearance around frames, housings, brackets or nearby components.

Key Specifications of STANLEY 70-388E

Why the Shallow Offset Design Matters

A flat ring spanner can become awkward to operate when a nut or bolt sits close to a machine surface, panel, housing or structural member.
The shallow-offset design raises the handle away from the fastener plane, creating additional clearance for the user’s hand and for movement of the tool.
This can be useful where the fastener is accessible but nearby components restrict the use of a completely flat tool.
A shallow offset is different from a deep offset. Where a fastener is deeply recessed or a larger obstruction must be cleared, a deep-offset ring spanner may be more appropriate.

What Does the Bi-Hex 12-Point Profile Do?

The STANLEY 70-388E uses a 12-point, or bi-hex, profile at both ring ends.
A 12-point ring provides more possible engagement positions around a compatible fastener than a six-point ring. This can help when surrounding components limit the available handle swing and the tool must be repositioned frequently.
Use only the 20 mm or 22 mm end that correctly matches the fastener. Do not force the tool onto an incorrectly sized or badly rounded nut or bolt head.

Chrome Vanadium Steel Construction

The STANLEY 70-388E is made from Chrome Vanadium Steel.
CRV is widely used in professional hand tools because it provides suitable strength for repeated manual fastening and loosening work when the correct tool size and technique are used.
The 70-388E remains a conventional manual hand spanner. It is not an impact-rated striking tool and it does not replace a calibrated torque wrench where a specified tightening torque must be measured or controlled.

Where Can STANLEY 70-388E Be Used?

Actual suitability depends on the equipment and fastener specification, but the 20×22 mm configuration can be relevant to:

Industrial Machinery Maintenance

For compatible 20 mm and 22 mm metric nuts and bolts encountered during servicing, inspection, adjustment and mechanical maintenance.

Automotive and Mechanical Servicing

For applicable vehicle, chassis, machinery or mechanical assemblies where the fastener size and surrounding clearance suit a shallow-offset ring spanner.

Workshop and Repair Work

For technicians who regularly encounter 20 mm and 22 mm metric fasteners and require fixed-size double-ring engagement.

Equipment Assembly and Adjustment

For manual fastening work where nearby housings, brackets or structural components make a shallow-offset handle useful.

Is STANLEY 70-388E Right for Your Requirement?

Choose this model when the requirement specifically calls for:

• 20 mm and 22 mm metric fasteners
• double-ended ring engagement
• 12-point / bi-hex profile
• shallow-offset clearance
• a fixed-size manual ring spanner
• exact STANLEY model 70-388E.

Before ordering, confirm both the fastener size and the working clearance around the application.

STANLEY 70-388E vs Other Spanner Types

Compared with an Open-End Spanner

The 70-388E uses closed ring ends rather than open jaws. An open-end tool may be more suitable where the spanner must approach the fastener directly from the side.

Compared with a Combination Spanner

A combination spanner normally provides an open end and ring end of the same size. The 70-388E instead provides two different ring sizes: 20 mm and 22 mm.

Compared with a Deep-Offset Ring Spanner

A deep-offset model creates greater separation between the handle and fastener plane. The 70-388E is intended where moderate additional clearance is sufficient.

Compared with a Ratcheting Spanner

The 70-388E is a conventional ring spanner without a ratcheting mechanism. A ratcheting design may be preferable when repeated turning without lifting and repositioning the tool is required.

Compared with an Adjustable Spanner

An adjustable spanner can cover a wider range of fastener sizes. The 70-388E is a fixed-size tool intended specifically for compatible 20 mm and 22 mm metric fasteners.

Buying STANLEY 70-388E in Delhi

Goabuyers can order the exact STANLEY 70-388E through Indus MegaMart and check delivery serviceability using the destination pincode.
Stock and delivery details should be treated as live commercial information rather than as permanent Goainventory or a guaranteed delivery promise.
For larger requirements, confirm:

• exact model 70-388E
• required number of packs
• destination pincode
• current availability
• expected delivery timeline
• GST billing requirements
• any applicable procurement documentation.

Indus MegaMart purchase invoices contain the company’s GST number.

Why Verify Model 70-388E Before Ordering?

STANLEY offers several shallow-offset ring spanners with different metric size combinations.
For this page, verify:
Brand: STANLEY
Model: 70-388E
Product Type: Shallow Offset Bi-Hex Ring Spanner
Size: 20 mm × 22 mm
If another metric size is required, select the corresponding model instead of substituting a visually similar spanner.

Frequently Asked Questions

What size is STANLEY 70-388E?

It is a double-ended metric ring spanner with 20 mm and 22 mm ring sizes.

Is STANLEY 70-388E a bi-hex spanner?

Yes. Exact-product information identifies it as a shallow-offset bi-hex, or 12-point, ring spanner.

What material is STANLEY 70-388E made from?

It is made from Chrome Vanadium Steel.

What is the overall length of STANLEY 70-388E?

Multiple exact-product sources list an overall length of approximately 300 mm.

What finish does STANLEY 70-388E have?

Exact-product and manufacturer-family research support a matt/matte finish.

Which standard applies to STANLEY 70-388E?

Exact-product sources list IS 2029.

What does shallow offset mean?

It means the handle is positioned away from the plane of the ring ends, providing additional working clearance where nearby surfaces or components restrict hand movement.

Can STANLEY 70-388E be used on both 20 mm and 22 mm fasteners?

Yes. One ring end is 20 mm and the other is 22 mm. Always use the end that correctly matches the fastener.

Is STANLEY 70-388E a ratcheting spanner?

No. It is a conventional double-ended ring spanner without a ratcheting mechanism.

Can STANLEY 70-388E be used with impact tools?

No impact capability has been verified for this model. Use appropriately rated impact tools where impact loading is required.

Can STANLEY 70-388E replace a torque wrench?

No. It is a manual ring spanner. Use a calibrated torque wrench where a specified tightening torque must be measured or controlled.

What is the STANLEY 70-388E price in Delhi?

The supplied National Product Detail Page currently shows ₹1,617 including GST for the listed pack of 10 pieces. The live GoaCity Page should remain synchronized with the corresponding National PDP price.

Can STANLEY 70-388E be delivered in Delhi?

Delivery serviceability should be checked using the destination pincode. Actual delivery timing depends on current availability and required quantity.

Where can I buy the exact STANLEY 70-388E?

Contact us