STANLEY STMT89456-8B 30mm 1/2-Inch 6-Point Impact Socket in Visakhapatnam

Check Pack, Price and Delivery Before You Order

Indus MegaMart lists STMT89456-8B as a pack of 10 sockets. Each socket is a 30 mm item; the listed price is for the seller's pack, not a single loose socket. Check the live GST-inclusive pack price, select the required quantity and enter your Visakhapatnam delivery pincode on the product page. You can place an order and complete payment even when the displayed available stock is zero. Orders within available stock follow a delivery window of within 7 days; orders exceeding available stock, including when stock is zero, follow 7–14 days. Check the final order details at checkout.
View Live Price and Buy STANLEY STMT89456-8B

Key Specifications — STMT89456-8B

Confirm These Details for Your Fastener and Tool

Check the 30 mm fastener measurement

The 30 mm marking refers to the width across the opposite flat faces of a matching hexagonal nut or bolt head. It is not the bolt's threaded diameter. If the fastener is worn, damaged or of an uncommon profile, measure it before ordering rather than relying on a nominal bolt size.

Check the 1/2-inch square drive and access depth

The socket needs a compatible 1/2-inch drive impact wrench or other suitable drive tool. Confirm the anvil, retention arrangement and access clearance. If the nut is recessed or a stud projects significantly beyond it, check whether a deep impact socket is required rather than assuming a standard-length socket will reach.

Choose an impact socket for powered impact work

An impact socket is intended for impact-tool use; an ordinary chrome hand socket should not be substituted on an impact wrench. Keep the socket fully seated, use suitable retaining accessories where required, follow the impact tool manufacturer's operating instructions and stop using a socket showing cracks, distortion or excessive wear. The exact maximum torque rating and overall dimensions of this SKU are not stated here.

Where This 30 mm Impact Socket May Be Used

The STMT89456-8B is relevant to maintenance work where equipment uses a matching 30 mm external hex fastener and a suitably sized drive tool. Potential tasks include servicing machinery assemblies, workshop equipment and vehicle or plant components that meet these fit requirements. Its 6-point profile engages the six flat faces of the fastener; fit, access and the tool's rated operating limits matter more than the product category alone. For final torque-controlled tightening, use the specified torque method and appropriate calibrated tools rather than assuming an impact wrench alone delivers an exact tightening value.

Ordering STANLEY STMT89456-8B for Delivery in Visakhapatnam

For a workshop replenishment order or a planned maintenance requirement, start with the exact STMT89456-8B listing. Review the pack quantity and live total including GST, use the pincode checker, and confirm your required packs before payment. A zero available-stock display does not by itself prevent ordering; the 7–14 day delivery window applies when the order exceeds available stock. For additional product or commercial questions, use Indus MegaMart's contact page.
For other sizes or socket formats, browse Socket & Socket Sets, the STANLEY product range or Hand Tools. These collections are for comparing alternatives; they do not replace the exact-model order page.

Frequently Asked Questions

1. What is the drive size of STANLEY STMT89456-8B?

It has a 1/2-inch square drive and is a 30 mm impact socket. Confirm the 1/2-inch anvil or drive of your tool before ordering.

2. Does 30 mm describe the bolt thread diameter?

No. It describes the across-flats dimension of the matching external hex fastener head or nut. Measure the head or nut, not the bolt thread, to select the correct socket size.

3. Is this a 6-point impact socket?

Yes. Indus MegaMart and other exact-model retailer listings identify STMT89456-8B as a 6-point impact socket. Check that a hexagonal 6-point engagement is appropriate for the fastener.

4. Does the quoted product price cover one socket or a pack?

Indus MegaMart's current sales format is a pack of 10 sockets. Review the live GST-inclusive pack price on the exact product page; do not confuse a per-piece subtotal with the taxable total for the pack.

5. Can I order this impact socket if available stock shows zero?

Yes. Indus MegaMart accepts orders and payment even when available stock is zero. If the ordered quantity exceeds stock, including zero-stock cases, the delivery policy is 7–14 days.

6. Will it reach a recessed nut or a nut on a long stud?

That depends on the access space and how far the stud protrudes. Check the required socket depth and clearance; choose an appropriate deep impact socket if a standard-length socket cannot seat fully.

7. Can I use an ordinary non-impact socket instead on an impact wrench?

Use an impact-rated socket suitable for the impact tool. Standard hand sockets are not intended as substitutes for powered impact operation. Follow your tool and socket safety instructions.

Buy STANLEY STMT89456-8B 30 mm Impact Socket in Visakhapatnam

Ready to order? Confirm STMT89456-8B, 30 mm, 1/2-inch drive and the pack-of-10 listing, then check the current GST-inclusive pack price and delivery options for your pincode.
Check Live Pack Price & Order STANLEY STMT89456-8B