STANLEY STMT60813-8 PH2 X 250MM Cushion Grip Phillips Screwdriver in Vijayawada

STMT60813-8 specifications at a glance

The PH2 designation refers to the Phillips cross-head tip size, not the diameter of a round shaft. The 250 mm measurement identifies the blade length, not the full screwdriver length. The handle also identifies the tip style for easier selection from a tool kit.

Where the 250 mm Phillips blade is useful

The longer blade helps when a PH2 screw is recessed inside a machine cover, equipment casing, frame or accessible enclosure and a shorter screwdriver cannot reach the head comfortably. It can also be useful for routine assembly and mechanical maintenance where a straight approach to the screw is available but the grip needs to stay clear of surrounding components.
Before choosing the tool, confirm that the fastener is truly Phillips PH2, that there is enough clearance for the blade and handle, and that the tip can enter the recess squarely. Use steady hand pressure and suitable torque. A longer screwdriver is not automatically a higher-torque or impact-rated tool, and it should not be used to force damaged or mismatched screw heads.

PH2 × 250mm or a shorter screwdriver?

Choose this 250 mm version when extra access depth is the deciding factor. A 100, 125, 150 or 200 mm PH2 screwdriver may be easier to manage where the screw is close to the surface or space behind the handle is limited. The correct choice depends on access depth and screw recess, not simply on selecting the longest blade. If the screw is PH1, PH3, Pozidriv, slotted or Torx, select the correct tip rather than forcing the PH2 profile.
Important electrical safety note: This product is not represented as VDE-insulated or certified for work on energised circuits. For electrical panel maintenance, isolate power and follow site procedures; when a task requires an insulated live-work tool, choose an appropriately certified product instead.

Ordering STANLEY STMT60813-8 for Vijayawada maintenance and procurement

For Vijayawada-based service teams, workshops and industrial procurement departments, the main checks are the exact STMT60813-8 model, the 10-piece seller pack, how many packs are required, the applicable GST-inclusive order price and the delivery pincode. A manufacturer product photo or another retailer's one-piece price does not establish the quantity in the Indus MegaMart offer.
Indus MegaMart's ordering policy accepts orders and payment even when displayed stock is zero. Where the ordered quantity is within available stock, the policy specifies delivery within 7 days. Where the order exceeds available stock, including zero-stock situations, it specifies 7–14 days. Enter the delivery pincode and review the live product details before checkout; an unverified local warehouse or immediate delivery is not promised.
For multi-pack maintenance requirements or institutional procurement, confirm the selected pack quantity and any necessary invoice, warranty or dispatch documentation during the ordering process. The national listing is the authoritative checkout destination for this model.

Frequently asked questions

1. Is STMT60813-8 a PH2 screwdriver with a 250 mm blade?

Yes. STANLEY identifies STMT60813-8 as a PH2 Phillips screwdriver with a 250 mm blade. The 250 mm figure describes blade length rather than total tool length.

2. Does the Indus MegaMart offer contain one screwdriver or ten?

The Indus MegaMart product listing observed for this model shows a pack of 10 pieces. STANLEY's own product overview describes one individual screwdriver, and other retailers can sell single units. Check the current seller pack on the product page before paying.

3. Is this screwdriver suitable for deep-set screws?

It can be useful for recessed PH2 screws where a shorter screwdriver cannot reach comfortably, provided the fastener, access angle and handle clearance are suitable. It is not intended to substitute for a specialised impact or torque-controlled tool.

4. Does STMT60813-8 have a magnetic tip?

Some official STANLEY regional product information describes a magnetic tip, but Indus MegaMart notes that magnetisation may vary by batch configuration. Confirm the current supplied configuration with the seller if magnetic pickup is essential to your work.

5. Can I use it on a live electrical panel?

Do not treat this ordinary cushion-grip model as a certified insulated screwdriver. De-energise equipment and follow your safety procedure. Use a properly rated VDE/insulated tool where the task requires one.

6. What happens if the available stock is below my order quantity?

Under Indus MegaMart's stated order policy, checkout/payment can still proceed. Delivery is within 7 days when the requested quantity is within available stock, and 7–14 days when it exceeds available stock or displayed stock is zero, subject to the live delivery check.

7. How do I see the current price and place the order in Vijayawada?

Open the exact STANLEY STMT60813-8 product listing, review its current GST-inclusive pack price, choose the number of packs or applicable sale units, enter your delivery pincode and use the purchase controls shown there. Do not compare a pack-of-10 price with a single-unit offer without checking the quantities.

Buy / Check Current Price for STANLEY STMT60813-8 PH2 × 250mm