STANLEY 70-950E 20mm Combination Spanner - Buy in Vellore

Check Price, Pack Quantity and Order Details

• Product: STANLEY 70-950E Combination Spanner, metric 20mm.
• Seller's listed order unit: Pack of 10 individual 20mm spanners.
• Price and tax: View the current GST-inclusive 10-piece pack price shown with the product listing before checkout. Any per-piece figure should be compared on the same GST and quantity basis.
• Vellore delivery: Enter the destination pincode to check delivery eligibility and the applicable order information.
• Purchase: View current price and order STANLEY 70-950E 20mm.

Verified STANLEY 70-950E Technical Specifications

The anti-slip open-jaw design helps improve engagement, while the Maxi-Drive ring-end design is intended to reduce damage from fastener rounding when the tool is used correctly. Before working in a confined location, check that both the 240mm overall length and the head dimensions leave enough operating clearance.

Where a 20mm Combination Spanner Is Useful

This model is a practical choice for manual fastening work when a maintenance drawing, tooling list or actual nut or bolt head calls for a 20mm spanner. Typical work settings include engineering workshops, mechanical equipment servicing, plant maintenance and assembly activities. The open end lets the user reposition the tool between turns where the ring cannot pass over the fastener. Where the ring end can seat fully, it offers a more enclosed working engagement.
A 20mm spanner is selected by the width across the fastener's flats, not merely by the nominal thread diameter or the name of the machine. Measure the nut or bolt head, or follow the applicable equipment documentation. A 19mm or 21mm spanner is not an appropriate substitute for a correctly sized 20mm hex head. Avoid trying to compensate for the wrong size with excessive force.

Choosing This Model Instead of Another Spanner

Choose STANLEY 70-950E when you need the exact STANLEY model and a fixed 20mm metric combination wrench, including both open and ring access in one hand tool. For regularly repeated 20mm hex-head tasks, its fixed-size profile makes the sizing decision more specific than choosing an adjustable wrench.
The suitability of the ring end depends on clearance around the fastener and the condition of the head. This product is a manual combination spanner, not an impact-wrench accessory or a calibrated torque wrench. Where a joint has a specified tightening torque, follow the machinery manufacturer's instructions and use a suitable torque-measuring tool. Do not assume a torque rating from the length of the spanner.

Ordering for Vellore Workshops and Maintenance Teams

For Vellore procurement, check the listed 10-piece unit against the quantity needed by your tool crib or maintenance team, verify the current total including GST, and enter the delivery pincode. Purchase and payment can be completed under Indus MegaMart's ordering policy even when the displayed available stock is zero or is below the requested quantity.
When the quantity ordered is within the available stock, Indus MegaMart's stated delivery period is within 7 days. If the quantity exceeds the available stock, including when stock is zero, the stated delivery period is 7–14 days. Actual destination serviceability is checked through the pincode facility. Purchase invoices include the company's GST number. For requirements dependent on a project deadline, review the availability and delivery details before confirming the order.
You can also explore other STANLEY tools, compare options in Spanners, or view the wider Hand Tools category. These links are useful if the required head size or tool type differs from 70-950E.

Frequently Asked Questions

1. Is STANLEY 70-950E a 20mm spanner?

Yes. Model 70-950E is the 20mm metric STANLEY combination spanner. Both working ends are intended for correctly sized 20mm hexagonal fastener heads.

2. What is the length and weight of the 70-950E?

Its overall length is 240mm, and the nominal weight of one tool is approximately 210g. The open-end outside width is 43mm and the ring-end outside width is 29.5mm; these can help with a clearance check.

3. Is the displayed price for one piece or ten pieces?

Indus MegaMart lists a pack of 10 pieces for this model. Check the current GST-inclusive pack total on the product listing. Do not compare a ten-piece total directly with another seller's single-piece price.

4. Can I order 70-950E for Vellore when available stock is zero?

Yes. Under Indus MegaMart's ordering policy, orders and payments remain accepted even if current available stock is zero. The stated delivery window in that case is 7–14 days, subject to checking the delivery pincode.

5. Can I use a 19mm or adjustable spanner instead?

A 19mm fixed spanner is not suitable for a 20mm hex head. An adjustable wrench serves a different tool-selection need; choose the fixed 20mm 70-950E when the exact combination-spanner model and size are required.

6. Is the 70-950E designed for impact tools or accurate torque measurement?

No. It is a manual hand spanner, not an impact socket or a calibrated torque wrench. Use the correct tool and specified tightening procedure when torque control is required.

7. Will my purchase include a GST invoice?

Indus MegaMart's generated purchase invoices include the company's GST number. Check the current product price and tax breakdown when placing your order.

8. How can I check delivery to my Vellore address?

Enter your destination pincode on the exact product listing, review the available delivery information and complete the order through that product page. There is no need to select a different spanner or city page.

Order STANLEY 70-950E 20mm Combination Spanner

For the correct model, a clearly identified 10-piece seller pack, the current GST-inclusive total and the destination-pincode check, view and buy STANLEY 70-950E 20mm Combination Spanner at Indus MegaMart.