STANLEY 70-384E 12x13mm Shallow Offset Bi-Hex Ring Spanner in Thane

STANLEY 70-384E Price in Thane

Current National Product Detail Page price: ₹814 including GST.
The current Indus MegaMart listing is for a pack of 10 pieces.
Displayed base price: ₹690 + ₹124 GST @18%.
Current stock and delivery information should remain dynamic because availability may change before purchase.
Check Current Price & Buy STANLEY 70-384E

What Is the STANLEY 70-384E?

STANLEY 70-384E is a double-ended metric ring spanner with 12 mm and 13 mm ring sizes.
Both ends use a bi-hex, or 12-point, profile. Unlike an open-end spanner, the ring surrounds the compatible fastener head, while the shallow offset creates clearance between the handle and the working surface.
This makes the tool relevant where a technician needs fixed 12 mm and 13 mm sizes together with ring-end engagement and moderate offset clearance.

Key Specifications of STANLEY 70-384E

Why the Shallow Offset Design Matters

A straight ring spanner can be difficult to operate when the fastener sits close to a flat surface, housing, bracket or nearby component.
The shallow-offset geometry raises the handle away from the fastener plane, providing additional working clearance while retaining a relatively low-profile design.
This can be useful for routine mechanical and maintenance work where the nut or bolt is accessible but the surrounding structure limits comfortable hand or handle clearance.
A shallow offset should not be confused with a deep-offset spanner. Where the fastener is deeply recessed or a larger obstruction must be cleared, a different spanner geometry may be more appropriate.

What Does the Bi-Hex 12-Point Ring Profile Do?

The ring ends use a 12-point, or bi-hex, profile.
For a compatible metric fastener, the additional engagement positions can make it easier to reposition the spanner when working space restricts handle movement.
The correct 12 mm or 13 mm end should always be matched to the actual fastener size. A correctly fitting fixed-size spanner is important for secure engagement and for reducing unnecessary damage to the fastener.

Chrome Vanadium Steel Construction

The 70-384E is listed in chrome vanadium steel.
CRV is widely used for professional hand tools because it provides the strength required for repeated manual fastening applications when the tool is used correctly.
This product should still be used as a hand spanner. It is not a substitute for impact-rated tooling or a calibrated torque wrench.

Where Can STANLEY 70-384E Be Used?

The exact use depends on the equipment and fastener size, but the 12×13 mm configuration can be relevant to:

Mechanical Maintenance

For routine tightening and loosening of compatible 12 mm and 13 mm metric nuts and bolts during equipment servicing.

Workshop Repair and Servicing

For technicians who repeatedly work with these two fastener sizes and prefer fixed ring-end engagement.

Equipment Assembly

For manual assembly and adjustment tasks where the applicable specification calls for 12 mm or 13 mm fasteners.

Automotive and General Mechanical Work

Where compatible metric fasteners are used and the shallow offset provides useful clearance around adjacent components.

Is the STANLEY 70-384E Right for Your Requirement?

Choose this model when the requirement specifically calls for:

• 12 mm and 13 mm metric fasteners
• a double ring-end spanner
• a 12-point / bi-hex profile
• shallow offset clearance
• a fixed-size hand tool
• an individual model that can be procured in Indus MegaMart’s current pack quantity.

Do not choose this model solely because it is a STANLEY spanner. Confirm the required fastener sizes and access conditions first.

Shallow Offset Ring Spanner vs Other Spanner Types

Compared with an Open-End Spanner

The 70-384E uses closed ring ends rather than open jaws. If rapid side access to a fastener is the primary requirement, an open-end design may be more appropriate.

Compared with a Combination Spanner

A combination spanner normally provides an open end and a ring end of the same size. The 70-384E instead provides two different ring sizes: 12 mm and 13 mm.

Compared with a Deep-Offset Ring Spanner

A deep-offset design provides greater separation from the fastener plane. The shallow-offset 70-384E is more relevant where only moderate clearance is required.

Compared with an Adjustable Spanner

An adjustable spanner can cover multiple fastener sizes. The 70-384E is a fixed-size tool intended specifically for 12 mm and 13 mm metric fasteners.

Buying STANLEY 70-384E in Thane

Thane buyers can order the exact 70-384E through Indus MegaMart and check serviceability for the destination pincode.
The National PDP currently shows stock and quantity-dependent delivery information. This should be treated as live commercial data rather than as a permanent Thane delivery guarantee.
For larger requirements, confirm:

• exact model 70-384E
• required number of packs
• destination pincode
• current availability
• required delivery timeline
• GST billing details
• any procurement documentation needed for the order.

Indus MegaMart purchase invoices contain the company’s GST number.

Why Verify Model 70-384E Before Ordering?

STANLEY offers multiple shallow-offset ring spanner sizes in the same product family.
For this page, the exact configuration is:
Brand: STANLEY
Model: 70-384E
Type: Shallow Offset Bi-Hex Ring Spanner
Size: 12 mm × 13 mm
If your required size differs, choose the matching model rather than substituting a similar-looking ring spanner.

Frequently Asked Questions

What size is STANLEY 70-384E?

It is a double-ended metric ring spanner with 12 mm and 13 mm ends.

Is STANLEY 70-384E a bi-hex spanner?

Yes. The verified product information identifies it as a bi-hex, or 12-point, ring spanner.

What material is the 70-384E made from?

The product is listed as Chrome Vanadium Steel.

What is the length of STANLEY 70-384E?

Multiple exact-product sources list an overall length of 225 mm.

What finish does STANLEY 70-384E have?

Multi-source exact-product research supports a matt/matte finish.

Which standard is listed for this spanner?

Exact-product sources list IS 2029.

What is the benefit of the shallow-offset design?

The offset creates additional clearance between the handle and the fastener plane, which can make manual fastening easier where nearby surfaces or components restrict hand clearance.

Is 70-384E suitable for both 12 mm and 13 mm fasteners?

Yes. One ring end is 12 mm and the other is 13 mm. Always use the end that correctly matches the fastener.

Is this a ratcheting spanner?

No. The verified product information identifies it as a conventional double-ended ring spanner, not a ratcheting wrench.

Can it replace a torque wrench?

No. This is a manual ring spanner. Where a specified tightening torque must be measured or controlled, use an appropriate calibrated torque tool.

What is the STANLEY 70-384E price in Thane?

The supplied National Product Detail Page currently shows ₹814 including GST for the listed pack of 10 pieces. The City Page should use the same dynamically synchronized National PDP price.

Can STANLEY 70-384E be delivered in Thane?

Delivery serviceability should be checked using the destination pincode. Actual timing depends on current stock and ordered quantity.

Where can I buy the exact STANLEY 70-384E model?

Contact us