STANLEY 70-938E 8 mm Combination Spanner in Solapur - Pack of 10

Buy the STANLEY 70-938E 8 mm Spanner for Solapur Delivery

Indus MegaMart lists model 70-938E as a ten-piece pack of matching 8 mm combination spanners, not a mixed-size set. Check the current price, tax-inclusive amount and selected quantity on the product purchase page; enter your Solapur delivery PIN code to check delivery details. The displayed offer shows the price for the specified pack, so compare it with single-piece listings only after accounting for the number of tools.

STANLEY 70-938E Technical Specifications

The dimensions describe an individual spanner; they are not the dimensions or weight of a shipping carton. A non-ratcheting hand spanner is turned and repositioned manually—this model is not a ratcheting wrench or an impact-socket accessory.

How the Two Ends Help with 8 mm Fasteners

Open End for Quick Access

The open jaw can approach a correctly sized nut or bolt head from the side. This is helpful when a threaded rod, nearby component or position of the fastener makes it inconvenient to lower a closed ring over the top. Keep the jaw square to the fastener flats and avoid forcing the spanner if the fit feels loose.

12-Point Ring End for a More Enclosed Grip

Where there is enough access to place it over the fastener, the 12-point ring surrounds the head more completely than an open jaw. It provides additional engagement positions when the handle has limited room to move. Use it for appropriately controlled manual turning; this is not a calibrated torque wrench.

Chrome Vanadium Steel and Matte Finish

Chrome vanadium steel is used in this STANLEY combination-spanner series, with a matte-finish tool surface. This material information helps buyers match a specified hand-tool series, but it does not establish a particular certified load rating, electrical insulation rating or torque limit for this individual SKU.

Check Fitment Before Purchasing

An 8 mm spanner is selected by the external across-flats width of the nut or bolt head. It does not mean that the bolt thread itself is 8 mm. A smaller thread may have an 8 mm head, and the same thread size can appear with different head standards; measure the actual head rather than guessing from the fastener's nominal thread diameter.
This STANLEY model is a metric 8 mm tool. Do not substitute an approximate imperial size or use it on badly rounded fasteners. If your fastener head needs 7 mm, 9 mm or another size, choose the appropriate separate model from the STANLEY spanner range.

Where an 8 mm Combination Spanner Is Useful

Workshop Maintenance and Assembly

The tool is useful for manual fastening work on compatible small hex-head bolts and nuts in workshop fixtures, light equipment covers and brackets. For an assembly requiring repetitive 8 mm work, a common-size ten-piece pack can simplify tool allocation across benches or maintenance personnel.

Automotive and Equipment Service

Use it where an actual measured 8 mm hex head appears on accessible components, such as certain clamps, small brackets or service fittings. Fastener-head fit and the manufacturer's tightening procedure matter more than the vehicle or machine category. For specified final tightening torque, use the correct separately rated torque tool.

Maintenance Tool Cribs and Institutional Procurement

Buying a single model in a ten-piece pack can help teams replace lost or worn tools with a consistent size. Confirm the exact 70-938E model, delivery PIN code, current payable amount and the number of packs needed for each location before submitting the order.

Practical Use and Safety Limits

Choose the ring end when it seats completely and adequate working clearance exists. Seat either end fully before turning, apply controlled hand force and keep hands clear of pinch points. Do not use a hammer, extension pipe or powered impact tool with this manual combination spanner. A visibly damaged or spread-open jaw should not be used on valuable or safety-critical fasteners.
This hand spanner is not electrically insulated or intended for work on live electrical connections. Equipment should be made safe according to the applicable maintenance procedure before use. Its appearance alone is not evidence of a particular safety certification, rated torque capacity or chemical-resistance specification.

Solapur Ordering, GST Invoice and Stock-Based Delivery

Enter your Solapur PIN code on the product page and confirm your selected pack quantity before purchase. The actual product price shown there includes the corresponding GST breakdown, and a purchase invoice includes the business GST number.
Order acceptance is not limited to the quantity currently shown as available: orders and payments can also be placed when the requested quantity exceeds available stock or when available stock is zero. Under Indus MegaMart's standard policy, delivery is within 7 days when the ordered quantity is covered by available stock; where ordered quantity exceeds stock, including zero stock, delivery is within 7–14 days. Delivery remains subject to confirmation of serviceability for the destination PIN code. Stock displayed online is not a claim that a Solapur-based warehouse holds your order.

Frequently Asked Questions

1. Is STANLEY 70-938E the 8 mm combination spanner?

Yes. The STANLEY 70-938E is the metric 8 mm combination-spanner model, with one open end and one ring end.

2. Does 8 mm describe the bolt diameter?

No. The 8 mm measurement is the width across the flats of the fastener head that the tool grips. Check the head itself to select the correct spanner.

3. Is Indus MegaMart's displayed price for one piece or ten?

The listed 70-938E offer is a pack of 10 identical 8 mm spanners. Check the payable pack price and GST breakdown at checkout; a competing one-piece listing is not the same selling unit.

4. How long is each spanner?

The catalogued individual 70-938E spanner has an overall length of approximately 120 mm and nominal weight of 25 g.

5. Is it a ratcheting combination wrench?

No. This is a conventional manual, non-ratcheting open-end and ring-end combination spanner.

6. Can I buy even if the stock display becomes zero?

Yes. Indus MegaMart accepts orders and payment even when currently displayed stock is zero. The applicable delivery window in that case is 7–14 days, subject to the destination PIN-code serviceability check.

7. Is an 8 mm spanner automatically suitable for every M8 bolt?

No. M8 specifies a thread diameter, whereas this spanner fits an 8 mm hex-head across-flats dimension. Select the tool according to the actual head size.

8. Can Solapur businesses obtain an invoice with their GST purchase?

A business purchase invoice includes Indus MegaMart's GST number. Check invoice and billing details when placing the order.

9. Can the spanner be used as an impact or insulated electrical tool?

No. Use it as a manually operated hand spanner. It is not an impact accessory and is not specified as an insulated tool for live electrical work.

10. Where can I check the current price and place an order?

Open the exact STANLEY 70-938E National Product Detail Page on Indus MegaMart, confirm the current ten-piece pack offer, enter your PIN code and complete the purchase steps.

Order STANLEY 70-938E 8 mm Combination Spanner

For a repeatable 8 mm tool specification across Solapur maintenance teams or workshops, choose the listed ten-piece pack after confirming the fastener size and required pack quantity. Check current price and buy the exact STANLEY 70-938E 8 mm combination spanner.