STANLEY STMT72884-8B 1/4" 6 PT Standard Socket 13mm - Pan India Supply

It is supplied as a genuine branded SKU for replacement, tool kit standardization, and repeat MRO procurement across India.

STANLEY STMT72884-8B Application Context & Use Cases

This socket is typically used in:

• Automotive service bays for 13mm hex fasteners
• Two-wheeler and passenger vehicle maintenance
• Industrial MRO teams handling metric bolt assemblies
• Equipment panel fastening
• Light machinery assembly lines
• Maintenance shutdown tool replenishment

It is appropriate where:

• Controlled torque application is required
• Access space supports standard socket length
• Fastener head condition requires 6-point engagement

It is not intended for impact wrench use unless specifically paired with impact-rated accessories.

Selection Guidance – How to Choose Correctly

Confirm Drive Size Before Ordering
A 1/4" drive socket fits only 1/4" drive ratchets, extensions, or torque tools.
Common confusion:

• 1/4" drive ≠ 1/4" fastener size
• 1/4" refers to drive interface, not bolt diameter

If your ratchet is 3/8", this socket will not fit without an adapter.

Choose 6-Point vs 12-Point Correctly
6-point sockets:

• Provide stronger contact on flat surfaces
• Reduce risk of fastener rounding
• Preferred for tight or high-load fastening

12-point sockets:

• Easier alignment in confined spaces
• Slightly reduced contact area

For workshop durability, 6-point is generally selected.

Confirm Metric Requirement
13mm is metric.
It is not interchangeable with similar SAE sizes.
Incorrect size selection may cause:

• Fastener head damage
• Torque misapplication
• Slippage

Capacity / Practical Torque Logic Example

A 1/4" drive socket is typically used for light to moderate torque applications.
Example scenario:
If tightening a 13mm bolt on a two-wheeler engine casing:

• Recommended torque range may fall within light torque brackets
• 1/4" drive ratchet provides controlled leverage
• Reduced risk of overtightening compared to larger drive sizes

Using a 3/8" or 1/2" drive in the same scenario may increase risk of thread stripping.
Drive selection should match torque requirement, not only bolt head size.

Failure Conditions & Misuse Risks

This socket may fail or underperform under the following conditions:

• Use with impact wrench (non-impact rated)
• Application of excessive torque beyond drive design
• Use on rounded or deformed fasteners
• Corrosive chemical exposure without cleaning
• Hammering or side-loading

Typical misuse damage:

• Chrome flaking
• Drive deformation
• Internal rounding

For heavy industrial torque or seized fasteners, impact-rated sockets should be selected instead.

Who Should NOT Buy This

This socket is not suitable for:

• Impact wrench operations
• High-torque heavy industrial bolting
• Structural steel erection
• Applications requiring deep-reach access (choose deep socket)
• SAE fastener systems

If torque demand exceeds light-to-moderate fastening, upgrade drive size accordingly.

Material & Compatibility Table

Operational Handling & Installation Considerations

• Ensure clean fastener head before engagement
• Seat socket fully on fastener
• Apply straight-line torque
• Avoid angular loading
• Store in dry tool tray

During repetitive use:

• Inspect for internal rounding
• Check chrome surface integrity
• Replace if grip loosens

This is a precision engagement tool. It is not a striking tool.

Commercial Clarity

Lead Time
Ready stock dispatch subject to availability confirmation at time of enquiry.
Dispatch Capability
Pan-India shipping through standard logistics channels.
Metro dispatch typically faster depending on order cut-off timing.
Minimum Order Quantity
Single unit supply available.
Bulk quantities supported for institutional procurement.
Customization
No customization.
Standard branded SKU only.
Compliance

• GST billing available
• Supplied as genuine branded product
• Suitable for institutional purchase documentation

Tender Compatibility
Can be supplied as part of bulk tool procurement.
Part number referencing recommended in BOQ.

Procurement Process – How to Enquire

To avoid delay, provide:

• Required quantity
• Delivery city
• Urgency level
• Company name
• GST number (if applicable)

Bulk buyers should specify repeat cycle requirement for stock planning.
Enquiries without quantity specification may delay quotation.

Comparison Table – Common Alternatives

Selection should align with torque requirement and ratchet type.

Selection Checklist

Before placing order, confirm:
•           Ratchet drive is 1/4"
•           Fastener size is 13mm metric
•           Application does not require impact rating
•           Standard depth is sufficient
•           Torque requirement within light-to-moderate range
•           Quantity requirement clearly defined
•           Delivery location confirmed
If all above are validated, this SKU is appropriate.

High-Intent FAQs

Q1. Is this socket suitable for impact wrench use?
No. It is designed for manual ratchet use. Impact applications require impact-rated sockets.
Q2. Can this be used with a 3/8" ratchet?
Only with a 3/8" to 1/4" adapter. Direct compatibility is not available.
Q3. Is this socket deep or standard length?
This SKU is standard length. For extended reach, a deep socket variant is required.
Q4. Is it compatible with torque wrenches?
Yes, if the torque wrench has a 1/4" drive interface and torque range aligns with application.
Q5. Can bulk quantities be supplied for workshops?
Yes. Quantity requirements should be specified at enquiry stage for dispatch planning.
Q6. Is GST invoice provided?
Yes. GST-compliant billing is supported for institutional buyers.