STANLEY STMT72882-8B 1/4" 6 PT Standard Socket 11MM - Pan India Supply

It is manufactured to deliver accurate fastener engagement, reduced rounding risk, and compatibility with 1/4" square drive ratchets and extensions.

STANLEY STMT72882-8B Application Context & Use Cases

Automotive Workshop Maintenance

• Engine bay fasteners (metric hex)
• Hose clamp brackets
• Interior bracket assemblies
• Electrical mounting hardware

Industrial Maintenance

• Light machinery panels
• Control cabinet assemblies
• Pump and motor auxiliary fittings

Field Service Kits

• Standardized technician toolkits
• OEM service partner tool rolls
• Institutional workshop tool sets

This socket is selected where:

• Controlled torque is required
• Fastener head access is moderate
• Space constraints suit 1/4" drive systems

It is not intended for heavy industrial torque loads beyond 1/4" drive rating.

Selection Guidance – How to Choose Correctly

Before procurement, validate the following:

1. Confirm fastener head size is 11mm metric.
2. Confirm tool system is 1/4" drive.
3. Validate torque requirements are within 1/4" drive capacity.
4. Confirm standard length provides required access depth.
5. If recessed fastener – consider deep socket alternative.

Drive Compatibility Check
If your ratchet or torque wrench is:

• 1/4" square drive → Compatible
• 3/8" or 1/2" → Requires adapter (not recommended for torque accuracy)

Capacity / Real-World Torque Logic

A 1/4" drive socket system is typically used for:

• Light mechanical fastening
• Low-to-moderate torque applications

Example Use Case:
If tightening an M7 or M8 bolt with an 11mm hex head:

• Typical torque range: 10–25 Nm (depending on bolt grade)
• 1/4" drive system operates safely within this range
• Above 30 Nm continuous torque, 3/8" drive may be more appropriate

This socket is designed for controlled torque applications, not high-breakaway industrial fastening.

Failure Conditions & Misuse Risks

Misuse scenarios that lead to premature failure:

• Using impact wrench (non-impact rated socket)
• Using with high-torque breaker bar
• Hammering for removal of seized fasteners
• Using incorrect size (forcing onto 10mm or worn 11mm fastener)
• Operating in corrosive chemical exposure without maintenance

Common failure types:

• Fastener rounding
• Socket cracking
• Chrome flaking due to abuse
• Drive end distortion

This is a hand-tool socket, not impact grade.

Material & Compatibility Table

Operational Handling & Installation Considerations

• Ensure full engagement on fastener head before applying torque.
• Maintain clean fastener surfaces.
• Avoid side-loading.
• Store in dry tool cabinet.
• Wipe clean after exposure to moisture.

For professional workshops, periodic inspection of drive square is recommended.

Commercial Clarity

Lead Time

• Ready stock subject to batch availability.
• Standard dispatch within 24–72 hours for stocked quantities.

Dispatch Capability

• Pan-India shipment via surface and express logistics.
• Institutional and multi-location dispatch supported.

MOQ

• No mandatory MOQ for single units.
• Bulk pricing applicable for institutional orders.

Customization Availability

• No modification to branded SKU.
• Toolkit bundling possible for bulk procurement.

Compliance & Authenticity

• Supplied through structured commercial channel.
• GST-compliant invoicing.
• Original brand packaging.
• Batch traceability maintained at dispatch level.

Tender Compatibility

• Can be included in toolkit tenders.
• Technical specification sheet available on request.

Procurement Process

To raise enquiry, provide:

1. Required quantity
2. Delivery location
3. GST details
4. Required dispatch timeline
5. Whether part of toolkit bundle

Process Flow:

• RFQ submission
• Commercial quotation issued
• Stock confirmation
• Proforma / GST invoice
• Dispatch with tracking

Institutional accounts can be configured for repeat orders.

Comparison Table – Common Alternatives

6-point geometry is preferred for professional maintenance applications.

Selection Checklist

Before placing order, confirm:
•             Fastener head size verified as 11mm
•             1/4" drive system confirmed
•             Not intended for impact use
•             Torque requirement within 1/4" range
•             Standard depth sufficient
•             Quantity aligned with workshop cycle
If all above are validated, STMT72882-8B is technically appropriate.

High-Intent FAQs

Is this socket impact-rated?

No. It is a chrome hand-tool socket and must not be used with impact wrenches.

Can it be used with a torque wrench?

Yes, provided the torque wrench is 1/4" drive and torque remains within rated limits.

Is this suitable for automotive workshop use?

Yes, for light-to-moderate fastening tasks involving 11mm metric fasteners.

Does it fit 3/8" ratchets?

Only with an adapter. Direct compatibility is 1/4" drive.

Is bulk supply available?

Yes. Institutional and multi-location orders are supported.

Can this be included in government tenders?

Yes. Technical specification documentation can be provided for tender submissions.

How do I verify authenticity?

Supply is provided with GST invoice and original packaging. Batch traceability is maintained at dispatch level.