STANLEY STMT72877-8B 1/4" Drive 6 Point Standard Socket - 6mm | Pan India GST-Compliant Supply

This page provides model-specific supply for Pan-India industrial procurement with GST-compliant invoicing.

STANLEY STMT72877- Application Context & Use Cases

The 6mm, 1/4" drive, 6-point configuration is typically selected for:
Industrial Maintenance Operations

• Light-duty mechanical servicing
• Electrical panel assembly
• Control cabinet fastening
• Small equipment repair

OEM Assembly Lines

• Component fastening where M4/M5 hex-head fasteners are used
• Controlled torque tightening under 1/4" drive systems
• Repetitive low-to-medium torque applications

Automotive & Equipment Service

• Two-wheeler and small engine servicing
• Instrument bracket mounting
• Internal housing fastening

Institutional Toolkits

• Technical training institutes
• Government maintenance departments
• Standardized workshop kits

This socket is not designed for heavy structural torque or impact use.

Selection Guidance – Choosing the Correct Socket

Incorrect selection leads to fastener damage and tool wear.
Confirm Fastener Size

• Measure hex head across flats.
• Ensure exact 6mm requirement.
• Do not substitute with near metric equivalents.

Confirm Drive System

• Must match 1/4" square drive ratchet or extension.
• Not compatible with 3/8" or 1/2" drives.

Confirm Point Requirement

• 6PT preferred for higher torque control.
• 12PT only if access angle constraints exist.

Confirm Use Environment

• Manual torque only.
• Not for impact wrench use.

Capacity & Real-World Torque Example

Torque Context
A typical M4–M5 hex fastener (commonly 6mm head) may require torque in the range of:

• 3 Nm – 10 Nm (application dependent)

A 1/4" drive socket system is engineered for controlled torque within light-to-moderate fastening ranges.
Example Scenario
In an electrical control panel assembly:

• Fastener: M5 hex head (6mm)
• Required torque: 6 Nm
• Tool: 1/4" ratchet with torque control

The 6-point design distributes torque load across flat surfaces rather than edges, minimizing rounding risk in repetitive assembly cycles.

Failure Conditions & Misuse Risks

Common Causes of Premature Failure

• Use with impact tools
• Using incorrect drive size adapter
• Over-torquing beyond manual specification
• Applying to damaged fasteners
• Using extension pipes for leverage

Fastener Damage Risk
Using a 12-point socket in high torque scenarios increases:

• Edge rounding
• Slippage
• Rework downtime

The 6-point design is selected to prevent this.

Material & Compatibility Table

Operational Handling & Installation Considerations

Proper Engagement Method

• Ensure full seating on fastener head.
• Maintain perpendicular alignment.
• Apply steady torque pressure.
• Avoid sudden shock loading.

Storage Recommendations

• Store in dry tool tray.
• Avoid moisture accumulation.
• Do not mix with impact sockets.

Inspection Protocol
Before reuse:

• Inspect hex cavity for rounding.
• Check chrome plating integrity.
• Verify drive square is not deformed.

Commercial Clarity

Lead Time

• Ready stock subject to availability.
• Bulk quantities confirmed upon enquiry.

Dispatch Capability

• Pan-India dispatch via registered logistics.
• Suitable for industrial and institutional deliveries.

Minimum Order Quantity

• Single unit supply possible.
• Bulk procurement supported.

Customization

• No customization on branded SKU.
• Only original STANLEY configuration supplied.

Compliance & Documentation

• GST-compliant invoice provided.
• Model-specific billing.
• Supply traceable to branded source.

Tender Compatibility

• Suitable for government and PSU procurement where STANLEY model specification is defined.
• Documentation support available upon request.

Procurement Process – How to Enquire

To process efficiently, provide:

• Required quantity
• Delivery location (City / State)
• Company name
• GST number
• Contact person & designation
• Required delivery timeline

This ensures:

• Stock confirmation
• Accurate freight estimation
• Formal quotation issuance

Enquiries without quantity details may delay response.

Comparison Table – Common Alternatives

Selection Checklist – Decision Validation

Before confirming order, verify:

• Exact model: STMT72877-8B
• 6mm hex fastener confirmed
• 1/4" drive system available
• Manual torque application
• Non-impact usage
• Quantity defined
• GST-compliant invoice required

If all above are satisfied, this model is technically appropriate.

High-Intent FAQs

Q1: Is this an original STANLEY product?
Yes. Supply is provided as branded STANLEY model STMT72877-8B with GST-compliant documentation.
Q2: Can this be used with an impact wrench?
No. It is a manual chrome socket and not designed for impact use.
Q3: What fastener size does this support?
It is designed for 6mm hex-head fasteners.
Q4: Is bulk supply available for industrial orders?
Yes. Bulk quantities are supported subject to availability confirmation.
Q5: Is this suitable for tender submission?
Yes, where the specified model matches STMT72877-8B. Documentation support is available.
Q6: What is the difference between 6PT and 12PT?
6PT provides greater flat-surface contact and reduced rounding risk under torque.
Q7: Do you supply Pan India?
Yes. Dispatch is supported across India through registered logistics channels.