Stanley STMT60824-8 Cushion Grip Screwdriver (5x200mm) Supplier

As a supplier and distributor with Pan India reach, Indus Mega Mart supports procurement teams with consistent product availability, streamlined dispatch, and sourcing assistance for hand tools across diverse operational environments.

What is Stanley STMT60824-8 Cushion Grip Screwdriver (5x200mm)

Stanley STMT60824-8 Cushion Grip Screwdriver (5x200mm) is a hand tool designed for driving and loosening slotted fasteners, featuring a long 200 mm shaft for extended reach and a cushion grip handle for controlled torque application. It is commonly used in maintenance, installation, and assembly tasks across industrial and commercial setups.

This screwdriver variant is typically used where deeper access is required, such as recessed panels, machinery housings, or electrical enclosures. The 5 mm tip size aligns with standard slotted screws used in equipment assembly and maintenance.

The cushion grip handle is designed to improve operator comfort during repetitive use while allowing controlled torque transfer. In industrial settings, this becomes relevant when technicians work across multiple fastening points during inspections or servicing.

The extended shaft length (200 mm) also enables access in constrained environments where shorter tools cannot reach, reducing the need for disassembly of surrounding components.

Applications of Stanley STMT60824-8 Cushion Grip Screwdriver (5x200mm)

• Electrical Panel Assembly and Maintenance
Used to fasten or loosen terminal screws inside control panels where deeper access is required. The long shaft helps reach screws located behind wiring assemblies.
• Industrial Equipment Servicing
Maintenance teams use this tool when working on machinery casings or internal components where standard-length screwdrivers are insufficient.
• HVAC System Installation
Suitable for fastening components inside ducts or enclosed units where accessibility is limited and precision is required.
• Furniture and Fixture Installation in Commercial Projects
Used for assembling or adjusting fittings where screws are embedded within structural sections.
• Automotive Workshop Applications
Useful in accessing screws in engine compartments or dashboard assemblies where clearance is restricted.
• Packaging Machinery Adjustment
Operators use long-reach screwdrivers to fine-tune machine settings without dismantling protective covers.

Industries Using Stanley STMT60824-8 Cushion Grip Screwdriver (5x200mm)

This tool is commonly used across industries where maintenance access and precision fastening are routine:
• Electrical contracting and panel building
• Facility management and building services
• Manufacturing plants (light and heavy engineering)
• Automotive service and repair workshops
• HVAC installation and servicing companies
• Infrastructure and commercial project contractors

Operational Considerations

When selecting or using the Stanley STMT60824-8 Cushion Grip Screwdriver (5x200mm), buyers should evaluate:
• Access Requirements
The 200 mm shaft is beneficial for deep-set fasteners but may not be suitable for confined lateral spaces.
• Torque Application
Cushion grip improves handling, but for high-torque applications, users may require bolster-type screwdrivers.
• Compatibility with Fastener Type
Ensure the 5 mm slotted tip matches the screw profile to avoid slippage or damage.
• Working Environment
In oily or wet environments, grip texture and handle material play a role in maintaining control.
• Tool Wear and Maintenance
Regular inspection of the tip is necessary in high-frequency usage environments to prevent rounding.

Customization Options

As Indus Mega Mart operates as a supplier and distributor, customization at product level is not offered.
However, procurement teams can:
• Source multiple screwdriver sizes for toolkits
• Request bulk supply combinations
• Align procurement with maintenance schedules
• Integrate with broader hand tool sourcing requirements

Product Supply & Distribution Capability

Indus Mega Mart supports industrial buyers through:
• Reliable sourcing of Stanley hand tools
• Bulk procurement support for projects and maintenance contracts
• Distribution coordination for multi-location requirements
• Consistent availability across standard tool categories
The company functions as a supply partner, ensuring that procurement teams can access required tools without delays.
For company background, refer to:
https://www.indusmegamart.com/about-us

Supply Across India

Indus Mega Mart offers Pan India supply support, including:
• Dispatch coordination to metro and industrial regions
• Support for project-based deliveries
• Handling of repeat orders for maintenance cycles
• Logistics alignment with contractor timelines
This ensures continuity for operations where tool availability directly impacts project timelines.

How to Choose the Right Stanley STMT60824-8 Cushion Grip Screwdriver (5x200mm)

Buyers should evaluate the following before procurement:
• Required shaft length based on access depth
• Compatibility with screw type (slotted vs others)
• Frequency of usage (light vs repetitive industrial use)
• Need for ergonomic handling in prolonged tasks
• Availability of complementary tools (refer to related screwdriver selection guides)
For broader understanding, buyers often review internal tool standardization documents or refer to selection guides within the hand tools category.

Comparison Table

Selecting the correct screwdriver depends on application depth and torque requirements.

Typical Use Case Scenarios

• Electrical Contractor Deployment
Used during installation of distribution boards where screws are placed deep within enclosures.
• Factory Maintenance Shutdown
Technicians use long-reach tools to service internal machine components without dismantling surrounding assemblies.
• Facility Management Operations
Routine maintenance teams use this screwdriver for accessing concealed fixtures in commercial buildings.
• Automated Line Adjustments
Operators adjust internal components of conveyor or packaging lines with minimal downtime.

Procurement Process

To procure the Stanley STMT60824-8 Cushion Grip Screwdriver (5x200mm):

1. Share your requirement with quantity and delivery location
2. Confirm product availability and lead time
3. Receive quotation and commercial terms
4. Order processing and dispatch coordination

For enquiries, visit:
https://www.indusmegamart.com/contact-us

Common Buyer Concerns Before Ordering

• Whether the shaft length suits specific application depth
• Compatibility with existing fasteners
• Availability in bulk quantities
• Consistency in supply for repeat orders
• Durability under continuous industrial use
Indus Mega Mart addresses these concerns through structured supply support and clear communication during procurement.

Request a Quote for Stanley STMT60824-8 Cushion Grip Screwdriver (5x200mm)

Indus Mega Mart supplies and distributes industrial hand tools across India, supporting procurement teams with reliable sourcing and timely delivery.
For pricing, bulk enquiries, or technical clarification, contact:
https://www.indusmegamart.com/contact-us

FAQs

 What is the primary use of Stanley STMT60824-8 Cushion Grip Screwdriver (5x200mm)?
It is primarily used for driving slotted screws located in deep or recessed areas. The extended shaft allows technicians to access fasteners inside panels, equipment housings, and assemblies without dismantling surrounding components.
 Is this screwdriver suitable for heavy-duty applications?
It is designed for standard industrial use with moderate torque requirements. For heavy-duty fastening involving high torque, a bolster screwdriver may be more appropriate depending on the application.
 Why choose a 200 mm shaft screwdriver?
A longer shaft is useful when screws are positioned deep inside structures or behind obstructions. It reduces the need to disassemble components, saving time during maintenance and installation tasks.
 Can this screwdriver be used in electrical work?
Yes, it is commonly used in electrical panel assembly and maintenance. However, users should ensure compliance with safety requirements and use insulated tools where necessary for live environments.
 How does a cushion grip handle help in operations?
The cushion grip improves handling comfort and reduces hand fatigue during repetitive tasks. It also provides better control when applying torque, especially in extended maintenance operations.
 What should buyers check before purchasing this screwdriver?
Buyers should verify tip size compatibility, required shaft length, working environment conditions, and frequency of use. These factors help ensure the tool meets operational requirements.
 Is bulk procurement available through Indus Mega Mart?
Yes, Indus Mega Mart supports bulk procurement for industrial buyers, contractors, and maintenance teams, ensuring consistent availability and coordinated supply.
 Does this screwdriver require regular maintenance?
Basic maintenance includes inspecting the tip for wear, keeping the tool clean, and storing it properly. This helps maintain performance and extends service life.