Stanley STMT60806-8 Cushion Grip Phillips Screwdriver (PH1 x 150mm) Supplier

As a supplier and distributor, Indus Mega Mart supports procurement teams across India with consistent availability, reliable sourcing, and structured dispatch support for bulk and project-based requirements.

What is Stanley STMT60806-8 Cushion Grip Phillips Screwdriver (PH1 x 150mm)

Stanley STMT60806-8 Cushion Grip Phillips Screwdriver (PH1 x 150mm) is a manually operated fastening tool designed for driving and removing Phillips head screws. It features a PH1 tip size and extended shaft length, making it suitable for medium-duty fastening tasks in assembly lines, maintenance operations, and equipment servicing applications.

This screwdriver is part of Stanley’s cushion grip range, typically used in industrial and commercial toolkits where operator comfort and control are important. The PH1 tip size is commonly selected for medium-sized screws used in panels, fixtures, and equipment housings.

The 150 mm shaft length allows access into recessed or semi-restricted fastening locations. In operational environments such as control panels or machinery enclosures, this added reach reduces the need for extensions or alternate tools.

The cushion grip handle is designed to improve torque transfer while minimizing hand fatigue during repetitive use. For procurement teams, this type of tool is often categorized under general maintenance tools or assembly-line hand tools.

Applications of Stanley STMT60806-8 Cushion Grip Phillips Screwdriver (PH1 x 150mm)

• Electrical Panel Assembly
Used for fastening terminal blocks, switches, and panel components where PH1 screws are standard. The shaft length helps reach deeper panel sections.
• Equipment Maintenance in Workshops
Maintenance teams use this screwdriver for routine tightening and dismantling of machine covers and brackets.
• HVAC System Servicing
Technicians rely on PH1 screwdrivers when working on control units, fan assemblies, and duct-mounted equipment.
• Light Fabrication Units
Used in assembly stations for installing fittings, brackets, and sheet-mounted components.
• Appliance Repair Operations
Service technicians use this tool for dismantling consumer and industrial appliances where medium-sized Phillips screws are common.
• Automation and Control Systems Installation
Suitable for installing sensors, controllers, and small automation hardware.

Industries Using Stanley STMT60806-8 Cushion Grip Phillips Screwdriver (PH1 x 150mm)

This screwdriver is not restricted to a single sector. It is typically used across industries where manual fastening is still critical:

• Electrical and switchgear manufacturing
• Industrial maintenance contractors
• HVAC and building services
• Automotive workshops and service stations
• Machinery installation and commissioning teams
• Facility management companies

Procurement teams in these industries often require consistent tool specifications to standardize maintenance kits across multiple sites.

Operational Considerations

When evaluating this screwdriver for industrial use, consider the following:

• Fastener Compatibility: Ensure PH1 size aligns with screw specifications used in your equipment.
• Torque Requirements: Suitable for moderate torque applications; not intended for heavy-duty fastening.
• Work Environment: Cushion grip handles perform better in dry or moderately oily environments.
• Access Requirements: The 150 mm shaft supports access in recessed installations such as panels or enclosures.
• Tool Standardization: Useful in standardized toolkits where consistent screwdriver sizes are maintained across teams.

This tool is often used alongside pliers, torque tools, and insulated screwdrivers in maintenance kits.

Customization Options

As Indus Mega Mart operates as a supplier and distributor, customization at the product level is not offered. However, procurement flexibility is available in terms of:

• Bulk quantity supply
• Mixed tool kit sourcing
• Project-based tool bundling
• Repeat order scheduling

For large projects, procurement teams may request combined supply of multiple screwdriver variants or complementary tools.

Product Supply & Distribution Capability

Indus Mega Mart supplies the Stanley STMT60806-8 Cushion Grip Phillips Screwdriver through an established sourcing and distribution network.
Key supply capabilities include:

• Verified sourcing of branded tools
• Support for bulk and institutional orders
• Structured packaging for industrial dispatch
• Coordination for urgent requirements

As a distributor, Indus Mega Mart focuses on availability, consistency, and procurement support rather than manufacturing.

Supply Across India

Indus Mega Mart supports Pan India supply, covering:

• Metro cities and industrial clusters
• Tier-2 and Tier-3 manufacturing hubs
• Project sites and contractor locations

Dispatch is managed through logistics partners depending on order size and urgency. Procurement teams can align delivery schedules with project timelines.

How to Choose the Right Stanley STMT60806-8 Cushion Grip Phillips Screwdriver (PH1 x 150mm)

When selecting this screwdriver, buyers should evaluate:

• Screw size compatibility (PH1 requirement)
• Required shaft length based on application depth
• Frequency of usage (occasional vs repetitive)
• Operator comfort requirements
• Integration into existing toolkits

For a broader understanding, buyers can refer to internal guides such as screwdriver selection frameworks and fastening tool comparison resources available within the product category.

Comparison Table

This table helps compare typical screwdriver variations used in similar applications:

Typical Use Case Scenarios

• Control Panel Installation Contractor
A contractor assembling multiple panels uses PH1 screwdrivers for consistent fastening of internal components.
• Maintenance Team in Manufacturing Plant
Used for routine tightening of machine guards and access panels.
• Facility Management Services
Technicians carry this screwdriver for day-to-day repair tasks across buildings.
• OEM Assembly Line
Used in stations where medium-sized screws are repeatedly installed.

Procurement Process

To procure the Stanley STMT60806-8 Cushion Grip Phillips Screwdriver (PH1 x 150mm):

1. Identify quantity and usage requirement
2. Confirm compatibility with your application
3. Contact Indus Mega Mart via the official contact page
4. Request quotation and delivery timelines

You can initiate enquiries directly through:
https://www.indusmegamart.com/contact-us
For company background and supply capability, refer to:
https://www.indusmegamart.com/about-us

Common Buyer Concerns Before Ordering

• Whether PH1 size matches existing fasteners
• Durability under repetitive industrial use
• Grip comfort for extended usage
• Availability in bulk quantities
• Consistency across multiple batches

Indus Mega Mart addresses these concerns through structured sourcing and supply support.

FAQ Section

What type of screws can the Stanley STMT60806-8 screwdriver handle?
This screwdriver is designed for Phillips head screws of PH1 size. These are commonly used in medium-duty applications such as electrical panels, appliances, and light industrial assemblies. Buyers should verify screw head size before procurement to ensure compatibility.
Is the 150 mm shaft length suitable for industrial use?
Yes, the 150 mm shaft length is particularly useful in applications where screws are placed in recessed or hard-to-reach areas. It allows better accessibility compared to shorter screwdrivers, especially in control panels and machinery enclosures.
Can this screwdriver be used for heavy-duty applications?
It is generally intended for medium-duty fastening tasks. For higher torque or structural applications, larger sizes such as PH2 or PH3 screwdrivers are typically more suitable.
Is the cushion grip handle important for daily use?
Yes, cushion grip handles improve operator comfort and reduce fatigue during repetitive use. This is especially beneficial in maintenance and assembly environments where tools are used continuously.
How is this screwdriver different from precision screwdrivers?
Precision screwdrivers are designed for very small screws and delicate applications like electronics. This PH1 screwdriver is meant for general industrial use where moderate torque and durability are required.
Does Indus Mega Mart provide bulk supply for this product?
Yes, Indus Mega Mart supports bulk procurement for industrial buyers, contractors, and maintenance teams. Orders can be aligned with project requirements and scheduled deliveries.
Can this be included in a complete tool kit supply?
Yes, it can be supplied as part of a larger tool kit including other screwdriver sizes, pliers, and hand tools depending on project needs.

Request a Quote for Stanley STMT60806-8 Cushion Grip Phillips Screwdriver (PH1 x 150mm)

Indus Mega Mart supplies and distributes genuine industrial tools with structured procurement support.
For pricing, bulk enquiries, or technical clarification, connect with the team:
Contact Page: https://www.indusmegamart.com/contact-us
For procurement discussions, product enquiries, or bulk supply coordination:

Visit: https://www.indusmegamart.com/contact-us