STANLEY 70-374E 21x23mm Double-Ended Open Jaw CRV Spanner in Rishikesh

Order STANLEY 70-374E for Rishikesh Delivery

Select model 70-374E, confirm the 21×23mm size, and check that the order quantity is expressed in packs of 10 spanners. Review the current total price inclusive of GST alongside the purchase controls. Enter your Rishikesh delivery pincode to check the available shipping route, then proceed to the exact product purchase page.
Orders and payments are accepted even when the available stock is zero or does not cover the full order. Where the ordered quantity is within available stock, delivery is within 7 days. Where the order exceeds available stock, including when stock is zero, delivery is within 7–14 days.

Key Specifications of STANLEY 70-374E

Choosing the Right Jaw Size for Your Fastener

The 21mm jaw and 23mm jaw are intended for fastener heads or nuts with matching across-flats dimensions. Measure across the opposite flat faces of the nut or bolt head rather than selecting a wrench by the bolt's nominal thread diameter. The two jaw sizes are distinct: a 21mm fastener requires the 21mm end, and a 23mm fastener requires the 23mm end.
Ensure the jaw sits fully on the flats before applying force. Do not substitute a loosely fitting imperial size or use the tool on significantly rounded fasteners. For a stubborn or high-load fastener, select an appropriately rated ring spanner, socket or torque-controlled tool as required by the fastening procedure rather than extending the open-jaw spanner's handle.

Applications and Selection Considerations

This model is a practical option for suitable mechanical maintenance, machinery servicing, equipment assembly and workshop tasks involving 21mm or 23mm external-hex fasteners. Its open-ended form is useful where a tool must approach a fastener from the side, such as when adjacent components prevent a socket or ring end from being placed over the fastener.

Purchasing and Delivery Questions

1. Does STANLEY 70-374E fit both 21mm and 23mm nuts?

Yes, provided the nut or bolt head has the matching 21mm or 23mm across-flats measurement and the open-end jaw can fully engage the flats.

2. Is 70-374E a metric or an inch-size spanner?

It is a metric double open-end spanner. Its two nominal jaw sizes are 21mm and 23mm.

3. Does one Indus MegaMart order unit contain one spanner or ten?

The listed Indus MegaMart selling unit for this product is a pack of 10 spanners. Confirm pack quantity and the total payable amount on the exact product page before checkout.

4. Can an order be placed when the displayed available stock is zero?

Yes. Indus MegaMart accepts orders and payment even when the displayed available stock is zero. In that situation, the stated delivery timeline is 7–14 days.

5. What if my order quantity exceeds the available stock?

Orders larger than the available stock can still be placed and paid for. Under the standard order policy, delivery is within 7–14 days in that case.

6. How can I check delivery to my Rishikesh location?

Enter the delivery pincode on the product page to check the applicable delivery details before placing the order.

7. Should I use this spanner for the final tightening of a specified-torque bolt?

Use a properly selected calibrated torque tool when the fastening procedure specifies a final torque value. This double open-end spanner should not be treated as a torque-measuring instrument.

Buy STANLEY 70-374E 21×23mm Open Jaw Spanner

Confirm the model, jaw sizes and pack of 10, then check the current GST-inclusive price and delivery details. Buy STANLEY 70-374E 21×23mm Spanner — Pack of 10.