DEWALT DWMT81534-1 205-Piece Mechanics Socket Set in Rishikesh

Buy DEWALT DWMT81534-1 — Price, Quantity and Availability

Review the current product price and GST breakdown on Indus MegaMart before purchase. Select the number of complete tool sets required for your workshop, department or maintenance team.
For Rishikesh delivery, enter the destination pincode and review the available serviceability information. The product can be ordered online, subject to the applicable stock-dependent delivery window.
Check Price & Buy DEWALT DWMT81534-1

DEWALT DWMT81534-1 Technical Specifications

The 72-tooth mechanism can be useful where a handle has limited movement, and the multiple drive sizes allow technicians to select a tool suited to the fastener size and access conditions.

What's Included in the DEWALT 205-Piece Mechanics Tool Set?

The DWMT81534-1 combines several commonly needed mechanics-tool families rather than supplying sockets alone.

Ratchets — Three Drive Sizes

The kit contains one pear-head ratchet in each of these drive sizes:

• 1/4-inch drive
• 3/8-inch drive
• 1/2-inch drive

Each ratchet features a 72-tooth mechanism with a 5° arc swing.

Standard and Deep Sockets

The set includes the following six-point socket groups.

The socket sizes above describe the fitment of the individual sockets. The drive size describes the square connection between the socket and its ratchet or extension.

Combination Wrenches

Ten combination wrenches are included:
Metric: 10, 12, 13, 14 and 15 mm.
SAE: 5/16, 3/8, 7/16, 1/2 and 9/16 inch.
These wrenches provide another way to turn compatible fasteners where a socket and ratchet may not offer the preferred access.

Extension Bars, Adaptor and Spark-Plug Sockets

The kit includes five extension bars:

Additional components include:

• One 3/8-inch female-to-1/4-inch male drive adaptor.
• Two 3/8-inch drive spark-plug sockets in 5/8-inch and 13/16-inch sizes.

Extension bars can help reach suitable fasteners where the ratchet handle cannot be positioned directly over the socket.

Nut Bits, Screwdriver Bits and Hex Keys

The set also provides:

• 18 nut bits, covering SAE and metric sizes.
• 33 screwdriver/driver bits.
• 28 hex keys.
• One spinner handle.

The included metric nut-bit sizes are 4, 5, 6, 7, 8, 9, 10 and 11 mm.
The SAE nut-bit sizes include 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16 and 1/2 inch.
These accessories expand the kit beyond hexagonal nuts and bolts to other common fastening tasks.

Organized Storage Case

The components are supplied in a moulded carrying case with metal latches.
A dedicated storage layout can help teams return tools after a maintenance task, check that the required socket is available and transport the kit between work areas.

Why Choose a Three-Drive Mechanics Tool Set?

Different mechanical tasks require different socket sizes, working clearances and handle arrangements.

1/4-Inch Drive for Smaller Fasteners

The 1/4-inch drive section covers smaller socket sizes and can be convenient in compact equipment assemblies, accessible interior components and light mechanical servicing.
Choose the correct socket and avoid forcing a small drive system onto fasteners that require a different tool or torque procedure.

3/8-Inch Drive for General Workshop Work

The 3/8-inch drive provides a versatile selection of metric and SAE standard and deep sockets, making it useful for many routine servicing jobs.
It is often the practical middle ground when 1/4-inch sockets are too small or a 1/2-inch ratchet arrangement is less convenient.

1/2-Inch Drive for Larger Socket Sizes

The 1/2-inch drive section includes standard sockets in larger sizes, including metric sizes up to 22 mm within the listed contents.
It can be useful for matching larger hexagonal fasteners when the chosen tool is appropriate for the equipment's maintenance procedure.
The correct drive size depends on more than fastener diameter. Consider the actual load, tool capacity, available clearance and specified tightening method.

Useful Features for Everyday Mechanical Servicing

72-Tooth Ratchets and Restricted Access

A 72-tooth ratchet has a nominal 5° increment between engagement positions.
This enables repeated tightening or loosening strokes where there is limited space to move the handle, provided the correct socket can engage the fastener and the ratchet has enough room to operate.
The small swing arc is an access benefit, not a substitute for correct tool selection.

Six-Point Sockets with DirectTorque Technology

The supplied six-point sockets are designed for hexagonal fastener heads. DEWALT's DirectTorque technology is intended to increase contact with the flat surfaces of the fastener.
Choose the exact metric or SAE size for the job and fully seat the socket before applying force.

Standard Versus Deep Socket Selection

A standard socket is generally convenient when the nut or bolt head is accessible and there is no extended stud interfering with engagement.
A deep socket can provide additional access around a longer threaded stud or a fastening point that requires more socket depth.
Always confirm the available headroom and socket size. A deep socket will not automatically fit every recessed assembly.

Applications in Rishikesh Workshops and Maintenance Departments

The DEWALT DWMT81534-1 can support several kinds of manual fastening work.
Automotive service workshops: Useful for routine vehicle servicing, accessible fastener removal, component assembly and other work requiring matching metric or SAE sockets.
Industrial maintenance teams: Suitable for general mechanical inspection and repair tasks involving appropriate hexagonal fasteners and hand-tool procedures.
Fleet and equipment workshops: Provides multiple socket drives and accessory types in a portable kit for compatible maintenance operations.
Mechanical training and workshop laboratories: Can serve as a broad collection of hand tools for learning about socket drives, ratchets, fastener size selection and basic mechanical servicing.
Fabrication and equipment assembly: Useful for general tightening and loosening tasks where the required sockets and wrenches match the installed fasteners.
Suitability depends on the fastener profile, size, access, required force and equipment instructions. The kit should not be treated as a universal replacement for specialist maintenance equipment.

Important Compatibility and Usage Considerations

The Kit Contains Both Metric and SAE Tools

The model DWMT81534-1 contains two fastener-size systems.
Metric sockets and wrenches use millimetre measurements. SAE sizes are expressed in inches.
A close-looking imperial size is not automatically a safe substitute for a metric size. Use the exact-fitting tool to reduce the likelihood of slipping or damaging a fastener head.

Use with Manual Ratchets, Not Impact Wrenches

The supplied ratchets and chrome-finish sockets are part of a manual mechanics tool set. They are not identified as impact-rated sockets.
Do not connect these ordinary sockets to a powered impact wrench or hammer them into position. Use separately specified impact-rated sockets and accessories when impact driving is required.

Torque-Controlled Assemblies Need Additional Equipment

The set does not substitute for a calibrated torque wrench.
Where an equipment manufacturer specifies a tightening torque, use a suitable calibrated tool to apply the required value.
The three drive sizes provide selection flexibility, but they do not establish certified maximum torque limits for every included ratchet or socket.

Match the Correct Fastener Profile

The standard sockets are six-point hexagonal types.
A damaged fastener, a specialist profile or an inaccessible bolt head may require a different tool, even when a similar socket size is included.
Inspect tools for damage and keep the working surfaces clean before use.

Rishikesh Ordering, GST and Delivery

Indus MegaMart offers an online purchase path for the DEWALT DWMT81534-1 kit.
When ordering for a Rishikesh workshop or maintenance department, confirm the required number of complete sets, the destination pincode and the current product price shown at checkout.

Check the Current GST Price

Review the current GST-inclusive selling price and tax breakdown on the exact product listing.
For company purchases, Indus MegaMart's generated purchase invoices include the company's GST number.

Order Quantity and Delivery Timeline

Enter your Rishikesh pincode to check delivery serviceability.
For serviceable orders, the delivery timeline depends on the ordered quantity and available stock:

• If your ordered quantity is within the available stock, delivery is within 7 days.
• If your ordered quantity exceeds available stock, delivery is within 7–14 days.
• If available stock is zero, orders and payments remain accepted, with delivery within 7–14 days.

The applicable delivery period is therefore based on the quantity being purchased and the stock available for fulfillment.

Choosing Between a Complete Set and Individual Tools

This 205-piece kit is convenient when you need multiple socket sizes and supporting tools in one case.
If you require only one or two replacement sockets, an individual socket purchase may be more appropriate. Explore other DEWALT products and tool kits and sets to compare your options.

Frequently Asked Questions

Is DEWALT DWMT81534-1 a 205-piece socket set or a mechanics tool set?

It is a 205-piece mechanics tool set. In addition to sockets and ratchets, it includes combination wrenches, extensions, nut bits, screwdriver bits, hex keys and other accessories.

Does the kit include all three drive sizes?

Yes. The contents include 1/4-inch, 3/8-inch and 1/2-inch drive ratchets and matching socket groups.

Are all the sockets metric?

No. The DEWALT DWMT81534-1 includes both metric and SAE (inch-size) standard and deep sockets.

What metric socket sizes are included?

The standard and deep 1/4-inch and 3/8-inch socket groups provide sizes across their listed metric ranges. The 1/2-inch standard metric group includes 12, 13, 14, 15, 16, 17, 18, 19, 21 and 22 mm sockets. Refer to the complete contents table for the exact size available in each drive and socket style.

Does the kit include spark-plug sockets?

Yes. It includes two 3/8-inch drive spark-plug sockets, sized 5/8 inch and 13/16 inch.

Can I use these sockets with an impact wrench?

The kit is intended for manual hand-tool use and is not identified as an impact-rated socket set. Use compatible impact-rated accessories for powered impact equipment.

Does the set contain a torque wrench?

No torque wrench is listed among the included components. Use a suitable calibrated torque wrench separately when a specified tightening torque is required.

How many sets should I order for a workshop?

Order according to the number of workstations, technicians who need simultaneous access, and the tools already available. One complete kit can cover a broad range of tasks, but there is no universal number of kits required per workshop.

Can the product be ordered for Rishikesh if the displayed stock is zero?

Yes. Indus MegaMart accepts orders and payments even at zero available stock. The stated delivery window in this situation is 7–14 days, subject to delivery serviceability.

How can I check the current price and GST?

Open the product page, review the current GST breakdown and selected order quantity, then enter the Rishikesh delivery pincode before completing the purchase.

Buy DEWALT DWMT81534-1 205-Piece Mechanics Tool Set Online

Equip your workshop or maintenance team with a coordinated collection of 1/4-inch, 3/8-inch and 1/2-inch drive ratchets, metric and SAE sockets, combination wrenches, bits, extensions and hex keys.
Review the contents, confirm the quantity required, check the current GST-inclusive price and verify Rishikesh delivery serviceability.
View Current Price & Order DEWALT DWMT81534-1