STANLEY FMMT13095-0 FATMAX 18mm Reversible Ratcheting Wrench in Raipur - Pack of 10

Confirm the 18mm size before ordering

18mm is the wrench's across-flats fastening size, meaning the distance between opposite flat faces of the compatible hex nut or bolt head. It is not a statement that the fastener has an M18 thread. Thread diameter, nut standard and head width are different selection details; measure or confirm the head size rather than selecting a wrench from the thread designation alone.
A correctly sized wrench should seat fully on a clean, undamaged fastener. A loose fit or partially engaged head increases the chance of rounding the corners. If your maintenance inventory uses several head sizes, confirm whether the required point-of-use fasteners are actually 18mm before buying ten tools of the same size.

FATMAX FMMT13095-0 specifications

The individual tool and the merchant selling unit are not the same: STANLEY describes one wrench per manufacturer item; Indus MegaMart's product page groups ten of those tools into its commercial offer. This is not a mixed-size spanner set.
72 teeth and a 5° return angle
On the ratcheting ring side, the mechanism advances through small increments so the operator can perform successive strokes without lifting the wrench off the fastener after every movement. The 5° figure describes the mechanism's minimum operating arc, not a guaranteed clearance around every installed bolt. Allow additional physical room for the head, reversing lever, hand and surrounding parts.
Reversing lever and 12-point ring
The low-profile selector changes the ratcheting direction without requiring the operator to flip over the wrench. A 12-point box end offers multiple seating positions on a suitable hex fastener. Seat the ring fully and check the selected direction before applying controlled manual force.
Anti-slip open jaw and offset ends
The anti-slip jaw geometry is intended to improve contact with hex fastener flats compared with a basic open-jaw arrangement. The 15° offset of both ends can help position a hand away from adjacent surfaces. The open end can be the more practical choice when a pipe, bar or obstruction prevents placing the closed ring over the fastener.

Where the 18mm wrench is useful

The FMMT13095-0 suits repeated manual tightening and loosening on confirmed 18mm hex-head fittings in maintenance and service operations. Common task settings include workshop repairs, plant maintenance, machinery guards and accessible automotive or equipment assemblies. These are possible uses, not promises that the tool fits every machine or fastener in those industries.
Maintenance crews and service benches
For a repeated series of 18mm fasteners, the ratcheting box end can reduce the number of times a technician needs to lift and reposition the tool. The conventional jaw end remains available if a closed ring will not pass over the nut or fitting. Workers should still assess corrosion, accessibility and the torque specified by the equipment manufacturer before selecting a hand tool.
Fleet, mechanical and workshop operations
A repair bay may need an 18mm wrench for specific compatible fastener heads, but 18mm is not a universal automotive bolt size. Check the vehicle or equipment service instructions first. Where a specified final tightening torque is important, a calibrated torque wrench must be used for that controlled final step; this ratcheting combination wrench is not sold as a calibrated torque-measuring instrument.

Compare the tool before adding it to your purchase order

A conventional 18mm combination spanner can perform similar basic hand-fastening work but normally requires more frequent removal and reseating for short strokes. The FATMAX reversible ratcheting ring is a practical option when the operator repeats small movements in limited space. A socket and ratchet may instead be preferable when access is directly over the fastener or an extension is needed.
Do not substitute a model merely because its advertised size is also 18mm. The STANLEY STMT89943-8B family is a different product from FATMAX FMMT13095-0, with different seller-published dimensions and finishes. Compare the exact part number, head style, clearance, and selling quantity rather than treating prices from different wrench models as interchangeable.

When a different tool is safer

Use the specified torque wrench for controlled final torque, and an appropriately rated impact socket for impact-tool work. Severely seized fasteners may require a suitable breaker bar or dedicated procedure. Do not add an extension pipe to this ratcheting wrench or strike it to generate impact force. Check the fastener condition before engaging either end, especially if the head is rounded or damaged.

Price, ten-piece pack and Raipur delivery

Indus MegaMart's National PDP listed the pack of 10 at ₹9,900 including 18% GST on 26 October 2026; that is an observed price snapshot, not an independent Raipur-only price or a guarantee that it will remain unchanged. At that snapshot, the pack represented ₹990 including GST per wrench. The live selling price on the national page must take precedence over any older quotation or cached page text.
The product page displayed zero available units during this check. Under Indus MegaMart's published business-order policy, zero stock does not automatically prevent placing an order or completing payment. Delivery is within 7 days when the ordered quantity is no greater than available stock, and within 7–14 days when it exceeds available stock, including zero-stock cases. Delivery serviceability for a specific Raipur PIN code should be checked through the store's delivery checker at purchase.
For institutional supply, specify the exact model, 18mm size, required number of ten-piece packs, delivery PIN code, invoice details and any purchase-order reference. A requirement for just one wrench should not be confused with the listed Indus MegaMart pack-of-ten offer; verify any different selling-unit arrangement separately instead of assuming it is available through this listing.

Frequently asked questions

1. Is FMMT13095-0 an 18mm wrench or an 18mm bolt-thread tool?

It is an 18mm across-flats metric wrench. Match it to the hex head or nut width, not to an assumed M18 thread designation.

2. Is this a reversible ratcheting combination wrench?

Yes. The exact model has a ratcheting 12-point ring end with a low-profile reversing switch, plus an anti-slip open jaw at the other end.

3. What does the 72-tooth, 5° rating mean?

The ring-end ratchet can work through a minimum 5° operating arc. Practical clearance also depends on the wrench head, surrounding equipment and safe hand access.

4. How many wrenches are in Indus MegaMart's product offer?

The merchant displays one pack containing 10 identical 18mm FMMT13095-0 wrenches. It is not a ten-size assorted set. STANLEY's manufacturer page describes the individual wrench separately.

5. Is ₹9,900 the price for one wrench?

No. On the research date, ₹9,900 including GST was the displayed ten-piece pack price, equivalent to ₹990 including GST per tool. Check the current national page for live pricing.

6. Can an order be placed if the listing shows zero stock?

Under Indus MegaMart's stated order policy, customers may place orders and complete payment even when currently available stock is zero. The applicable zero-stock delivery window is 7–14 days; checkout behaviour should be confirmed at purchase.

7. Can this replace a calibrated torque wrench or impact socket?

No. This is a hand-operated ratcheting combination wrench, not a calibrated torque-measuring tool or impact-rated socket. Use the correct dedicated tool where a specified torque or impact drive is required.

8. Does Indus MegaMart guarantee a particular manufacturer's warranty?

A specific merchant warranty duration should be confirmed before ordering. Manufacturer web pages for this model display different regional warranty language, so this Raipur product page does not promise an unverified duration.

9. How do Raipur buyers check delivery and place an order?

Open the Product Detail Page, confirm the current pack price and quantity, enter the destination Raipur PIN code in the delivery checker and follow the product's purchase flow.

Order STANLEY FATMAX FMMT13095-0 for Raipur supply

Confirm that your requirement is for 18mm metric fastener heads and the ten-piece selling pack, then review the current GST-inclusive price and Raipur delivery details on the exact product page.
View current price and buy STANLEY FMMT13095-0 18mm on Indus MegaMart