STANLEY STMT60847-8 Torx T20X100MM Screwdriver in Puri

Buy or Enquire for STMT60847-8 in Puri

When checking the offer, use the complete part number STMT60847-8, not only “Stanley Torx screwdriver.” Specify the number of actual tools required and the Puri delivery pincode. On the national product page, confirm the seller's current selling unit, price, applicable GST, stock position and checkout or quotation route. Other retailers show different pack and minimum-order terms; their pricing does not establish Indus MegaMart's price or delivery commitment. A Puri search phrase by itself does not confirm a local warehouse or same-day dispatch.

Exact Product Specifications

The product is not a Phillips screwdriver, slotted screwdriver, interchangeable-bit set or impact driver. Its manufacturer listing does not verify an electrical insulation rating, ESD certification, security-hole tip or specific torque rating for this SKU. Only use it where the equipment instructions and fastener specification permit.

Confirm T20 Torx Fit Before Using the Tool

T20 identifies the screwdriver tip's six-lobe Torx profile; it is not a screw diameter. 100 mm identifies the nominal blade length rather than the total tool length. Check the fastener head before purchase: a T15, T25, Phillips or flat-blade recess needs a different tool. Seat the T20 tip fully and apply controlled manual force to avoid cam-out or screw-head damage. For a security-Torx fastener with a centre pin, verify a matching security-hole driver separately; standard T20 fit must not be assumed.

Where This T20 Screwdriver May Be Useful

A T20 hand screwdriver can support appropriate mechanical assemblies, cabinet or panel fasteners, equipment covers and routine workshop maintenance, but only where the actual equipment uses a T20 Torx screw and its service procedure permits manual driving. The 100 mm blade can help reach compatible screws that require a longer straight shaft; actual clearance and access must be checked against the assembly. If the fastener requires a measured torque setting, use the specified torque tool instead of treating this ordinary screwdriver as a calibrated torque driver.

Cushion Grip, Magnetic Tip and Blade Material

STANLEY's exact model information confirms the chrome-vanadium steel blade and magnetic tip. The magnetic end may help hold compatible ferrous screws during positioning; it is not a guarantee of magnetic holding force or suitability around magnet-sensitive components. The cushion-grip handle is intended for hand control; a product-specific retailer also describes a bi-material soft grip, a three-sided anti-roll profile and a handle-end size identifier. Use the correctly sized tip and suitable pressure rather than forcefully over-tightening small fasteners.

Puri Business Purchases and Correct Quantity

For facilities teams, repair workshops or purchasing departments in Puri, the important distinctions are the single screwdriver identified by STANLEY, any seller-defined pack, and any minimum order quantity. For instance, a seller's box of multiple tools is not the same thing as the manufacturer's specification for one model. When requesting a quotation, provide the SKU, T20 × 100 mm configuration, required tool count, delivery pincode and any GST invoice requirements. Explore related sizes through Indus MegaMart Screwdriver Sets or the STANLEY brand page; the current product is one screwdriver, even though it is listed within a category named Screwdriver Sets.

Frequently Asked Questions

1. What tip size does STANLEY STMT60847-8 use?

It uses a T20 Torx tip designed for an appropriately sized six-lobe T20 fastener recess.

2. What does T20 × 100 mm mean?

T20 denotes the Torx drive size. 100 mm is the nominal blade-length designation; it is not the screw diameter or the complete handle-to-tip length.

3. Is STMT60847-8 a single screwdriver or a set?

STANLEY's exact-model product page lists one T20 × 100 mm screwdriver. A retailer may sell it in a larger pack or enforce a minimum order; verify Indus MegaMart's exact selling unit before payment.

4. Does it have a magnetic tip?

Yes. The manufacturer specifically lists a magnetic tip for STMT60847-8.

5. What is the blade material?

STANLEY specifies high-grade chrome-vanadium steel for this screwdriver's blade.

6. Can I use a T20 screwdriver on a T15 or T25 screw?

No. A different Torx size can fit poorly and damage the fastener. Match the actual screw drive size specified by the equipment manufacturer.

7. Is this an electrically insulated or security Torx screwdriver?

The exact manufacturer information inspected does not establish VDE insulation or a security-hole tip for this SKU. Do not assume either safety or compatibility feature; select a correctly rated tool when required.

8. Can I order this for delivery to Puri?

Check the current Indus MegaMart exact product listing and confirm serviceability for your Puri delivery pincode, required quantity and merchant stock. A delivery promise cannot be inferred from the product name.

9. What details should a Puri bulk buyer include in an enquiry?

Request STMT60847-8, T20 × 100 mm, state the number of actual screwdrivers, confirm the seller pack or MOQ, and provide the delivery pincode and GST invoice requirements.

Check the Exact STANLEY T20 Screwdriver and Place an Enquiry

Visit the STANLEY STMT60847-8 Cushion Grip Torx T20 × 100 mm product page at Indus MegaMart to review the current listing or available enquiry process. Confirm model number, quantity basis, final price and delivery eligibility for your Puri pincode before ordering. For a workshop or bulk requirement, mention STMT60847-8 in your enquiry so the supplier can verify the exact T20 specification.