STANLEY STMT78096-8 13PC Combination Wrench Set in Odisha

What Comes in the STMT78096-8 13-Piece Set?

One set contains 13 imperial combination spanners and a storage holder. The included inch sizes are:

These are imperial wrench opening sizes, not metric millimetre sizes or bolt thread diameters. Check the required hex-head or nut across-flats dimension before selecting a tool. The holder helps keep the thirteen sizes together for workshop and mobile maintenance work.

Product Specifications

Where an Imperial Combination Wrench Set is Useful

An inch-size combination wrench set is relevant wherever equipment maintenance instructions or actual fastener measurements call for imperial across-flats sizes. Examples include servicing some imported machines, certain vehicle and engine assemblies, plant equipment with inch-dimension hardware, and older installations whose maintenance tools are specified in fractions of an inch.
The ring end can provide fuller engagement around an accessible hex nut or bolt head, while the open end can help where clearance limits the ability to place a ring over the fastener. Both ends must match the actual fastener size. A correct tool fit matters more than assuming every imported or US-spec machine uses the same bolt standard throughout.

Choosing the Correct Size Without Damaging the Fastener

Use the equipment manual or measure the across-flats dimension of the nut/bolt head. Then choose the corresponding inch-size wrench from the set and confirm a secure seating before applying force. The nominal bolt thread size is not a reliable substitute for the required wrench-opening measurement.
Do not assume that a nearby metric dimension is automatically interchangeable. Even a small clearance mismatch, wear or a damaged hex head can increase the chance of slipping and rounding the corners. For high-force operations, stuck fasteners, impact use or specified tightening torque, select purpose-rated tools and use a calibrated torque wrench when the procedure requires measured torque. The STMT78096-8 is a conventional combination spanner set, not a torque-measurement instrument.

STMT78096-8 Imperial Set or a Metric Combination Wrench Set?

The right choice depends on the wrench size the equipment actually specifies. Choose STMT78096-8 when the job requires fractional inch wrench sizes covered by this set. Choose a metric set when the specified hex-head or nut openings are in millimetres. Both tool families use the same general open-end/ring-end concept, but they are not interchangeable merely because some fractions and millimetre values are close.
If a worksite needs many different imperial sizes, this complete set may simplify tool organization. If one size is used repeatedly and others are unnecessary, an individually specified wrench may be the better purchase. Check the documented size range against maintenance schedules before ordering multiple sets.

Buying the STANLEY 13-Piece Imperial Spanner Set for Odisha

Indus MegaMart's National Product Detail Page displays the current price, GST details and available stock for STMT78096-8. Odisha purchasers can follow the exact-product link below, check the applicable delivery information and proceed through the online order route. Confirm the displayed quantity and total before payment.
Orders and payment can be accepted even when displayed stock is zero. Under Indus MegaMart's order policy, when the requested quantity is covered by available stock, delivery is within 7 days; if the order exceeds available stock or available stock is zero, delivery is within 7–14 days. The current product page and final checkout should provide the up-to-date commercial details for the order. The product is offered as a set of thirteen tools; ordering a quantity of one means one 13-piece set, not one individual spanner.
For the broader tool range, browse STANLEY products, spanners, or the hand tools category.

Frequently Asked Questions

1. What are the thirteen sizes in STANLEY STMT78096-8?

The set contains ¼, 5/16, ⅜, 7/16, ½, 9/16, ⅝, 11/16, ¾, 13/16, ⅞, 15/16 and 1 inch combination wrenches. It is an imperial set supplied with a holder.

2. Is STMT78096-8 a metric wrench set?

No. STMT78096-8 is the 13-piece inch-size/imperial combination wrench set. For metric hex openings, choose an appropriate metric wrench set rather than assuming these sizes match.

3. Is the holder included with the wrenches?

Yes. The thirteen combination wrenches are supplied together in a holder that helps organize the different sizes.

4. Which end of a combination wrench should I use?

Use the ring end when you can fully seat it over the hex fastener; the open end is useful when the surrounding space makes full ring access difficult. In either case, use the exact corresponding wrench-opening size and ensure a secure fit.

5. Can I choose the wrench size from the bolt's thread size alone?

No. The wrench must match the across-flats size of the bolt head or nut. Check the equipment specification or measure the hex head; nominal thread size alone may not establish the needed spanner size.

6. Can I still place an order if the website shows zero stock?

Yes. Indus MegaMart's published order policy accepts orders and payment even at zero available stock. Orders exceeding available stock, including zero-stock orders, follow the 7–14-day delivery window; check the live checkout for current order details.

7. Does one order unit mean one wrench or one complete set?

The product is sold as a 13-piece combination wrench set. One set includes thirteen differently sized imperial wrenches and the holder. Confirm the chosen cart quantity and the current total on the National Product Detail Page.

Order STANLEY STMT78096-8 for Odisha

Check the live GST-inclusive price, quantity and delivery information for the STANLEY STMT78096-8 13PC Imperial Combination Wrench Set, then complete your purchase on Indus MegaMart's exact National Product Detail Page.
View Current Price & Buy STANLEY STMT78096-8