STANLEY 1-86-510 10mm 6-Point Socket, 1/2-Inch Drive in Maheshtala - Pack of 6

Buy STANLEY 1-86-510 in Maheshtala – Price, Pack and Delivery

Selling unit: One pack containing six 10 mm sockets of model 1-86-510. The price shown for this offer is for the pack, not for one loose socket. Check the current GST-inclusive pack price and available quantity before paying. A manufacturer specification describing one socket does not change the six-piece selling unit on this listing.
Ordering and delivery: Enter the delivery PIN code to check serviceability. Indus MegaMart accepts orders and payment even when the requested quantity exceeds current available stock. Where the ordered quantity is within available stock, the stated delivery timeline is within seven days. Where the required quantity exceeds available stock, including when available stock is zero, the stated timeline is 7–14 days, subject to confirmation for the delivery address.
For a maintenance team's replacement stock, select the number of six-piece packs required rather than assuming the quantity selector refers to loose sockets. The item and selling quantity can be reviewed at checkout.

Product Specifications – STANLEY 1-86-510

The socket's 10 mm designation describes the size of the hexagonal fastener head it engages. The 1/2-inch designation describes the square connection to the driving tool. These two measurements are not interchangeable; a 10 mm socket head does not mean a 10 mm square drive or a specific tightening torque.

Why Choose a Six-Point Standard Socket?

More Contact on the Flats of the Fastener

A six-point socket engages the hexagonal shape of a correctly sized nut or bolt head. STANLEY's Maxi-Drive design is intended to help reduce rounding. For repeated service work, matching the socket exactly to the fastener head is more important than forcing a nearly matching imperial size or using a worn socket.

Standard Depth for Accessible Hex Fasteners

This is a standard-depth socket for ordinary accessible fastener heads. It is not a deep socket for a long protruding stud or recessed nut. Check access around the fastener before choosing between a standard socket, a deep socket and an extension.

Manual Ratchet and Drive Compatibility

Use it with a compatible 1/2-inch square-drive manual ratchet, breaker bar or hand torque wrench according to the driving tool's instructions. The socket is not itself a ratchet or torque-measuring instrument. It is a standard socket for manual use, not an impact socket for powered impact drivers or pneumatic impact wrenches.

Where This 10 mm Socket Fits in Workshop and Maintenance Work

The STANLEY 1-86-510 can be selected for 10 mm hex-head fasteners during machine-tool servicing, equipment assembly, workshop repairs and other mechanical maintenance where the fastener is accessible to a standard socket. A technician may use it for brackets, removable covers or mounting hardware when the actual fastener head measures 10 mm. Suitability depends on clearance, fastener condition and the fastening procedure; not every bolt described by its thread size has a 10 mm head.
For maintenance and procurement teams in Maheshtala, the six-piece offer may simplify replacing several identical sockets in shared tool cabinets or distributing the same size among workstations. For a mixed range of fastener sizes, a socket assortment may be more suitable than six identical 10 mm pieces.

Check These Details Before You Order

Confirm Head Size, Not Only the Bolt Thread

Measure the width across the flat faces of the nut or bolt head. A 10 mm hex socket is chosen by that head dimension; thread designations such as M6 or M10 do not by themselves tell you which socket is needed.

Match the Driving Tool

The connection on this socket is a 1/2-inch square drive. If your ratchet uses a 1/4-inch or 3/8-inch drive, you need an appropriately specified tool or adapter, not a forced connection. Accessories and driving tools are not included merely because a socket is listed.

Confirm the Quantity and GST Price

Indus MegaMart's offer is a six-socket pack of the same 10 mm size. Compare suppliers on the same per-pack or per-piece basis and verify the GST-inclusive total for the quantity required. An invoice containing the company's GST number accompanies orders under the store's documented invoicing procedure.
For more sizes and compatible tool options, explore Socket & Socket Sets, or browse the STANLEY range and Hand Tools categories. A 10 mm standard socket and a 10 mm deep socket are different tool profiles despite sharing the same nominal head size.

Frequently Asked Questions About STANLEY 1-86-510

1. Is STANLEY 1-86-510 a single socket or a set of six?

STANLEY identifies model 1-86-510 as an individual 10 mm socket. Indus MegaMart sells it as a pack of six identical sockets. The quantity and displayed pack price should be checked before placing the order.

2. What does 1/2-inch 6-point 10 mm mean?

It describes a socket with a 1/2-inch square-drive connection, a six-point hexagonal profile, and an opening for 10 mm hexagonal fastener heads. It does not specify a tightening torque.

3. Can I use this socket on a powered impact wrench?

No impact rating is established for this model. STANLEY specifies manual use. For an impact wrench, choose an appropriately rated impact socket instead.

4. Is a ratchet included in the six-piece pack?

The product consists of sockets. A ratchet, torque wrench, extension or adapter is not listed as part of the six identical socket pieces and should be purchased separately if needed.

5. Can it fit M10 bolts?

Not automatically. M10 describes a nominal thread diameter, while 10 mm here describes the fastener head size. Select the socket only after checking the head across its flats.

6. What is the difference between this and a 10 mm deep socket?

This is a standard-depth socket for accessible heads. A deep socket is designed to reach farther over protruding studs or into some recessed positions. Choose based on access and actual fastener geometry.

7. Can I order more than the available stock for Maheshtala?

Yes. Indus MegaMart accepts orders and payment even when the requested quantity exceeds available stock. Its stated delivery window is within seven days for an order within available stock, or 7–14 days when the order exceeds available stock or stock is zero, subject to address serviceability.

8. How do I check the current price and whether Maheshtala delivery is possible?

Open the exact model listing, review the current GST-inclusive price per six-piece pack, enter the delivery PIN code and check availability and delivery information before checkout.

9. How do I obtain a GST invoice for my workshop or company?

Indus MegaMart's ordering procedure generates an invoice containing the company's GST number. Enter the required billing details accurately and check the invoice information during purchase.

Order STANLEY 1-86-510 10 mm Socket – Six-Piece Pack

Select the genuine model 1-86-510, confirm the 10 mm six-point profile and 1/2-inch manual drive, and review the current six-piece pack price. For Maheshtala procurement or maintenance orders, check your PIN code and complete the purchase through the exact Indus MegaMart product listing.
Check Price & Buy STANLEY 1-86-510 – Pack of 6