Balluff BNS0067 BNS 819-100-K-13 Supplier

The product is commonly considered for applications involving machine safeguarding, position verification, mechanical actuation monitoring, and process control systems where dependable switching feedback is required as part of an automated operation.

What is Balluff BNS0067 BNS 819-100-K-13?

Balluff BNS0067 BNS 819-100-K-13 is a mechanical position switch from the Balluff BNS 819 series designed to detect and signal the position of moving machine components. It is typically used in industrial automation systems where mechanical actuation is available and position feedback is required for monitoring, control, or interlocking functions.
Unlike proximity-based sensing technologies that rely on electromagnetic or optical detection, mechanical position switches operate through physical actuation. This makes them suitable for applications where a direct mechanical trigger is preferred or where machine movement naturally provides the required switching action.
The Balluff BNS0067 BNS 819-100-K-13 is commonly evaluated for installation within machinery, production equipment, automated handling systems, and industrial process stations. It forms part of a broader machine-position monitoring strategy by providing discrete switching signals that can be integrated with PLCs, relay logic systems, machine safety architectures, and automation controls.

Applications of Balluff BNS0067 BNS 819-100-K-13

1. Conveyor Transfer Stations

Used to verify the arrival or departure position of carriers, pallets, or fixtures before material transfer operations proceed.

2. Machine Tool Position Monitoring

Installed on moving machine assemblies to confirm travel limits and operating positions during machining cycles.

3. Packaging Equipment

Supports position verification of indexing mechanisms, sealing units, and mechanical actuators within packaging machinery.

4. Automated Assembly Systems

Provides confirmation of fixture movement and component placement sequences in semi-automatic and automatic assembly cells.

5. Material Handling Equipment

Applied on lifting, positioning, and transfer equipment where controlled movement must be monitored throughout operation.

6. Industrial Gate and Access Mechanisms

Used to confirm open and closed positions within controlled industrial access systems and equipment enclosures.

7. Process Equipment Interlocking

Integrated into machine logic where operational sequences depend on verified mechanical positioning before subsequent actions occur.

Industries Using Balluff BNS0067 BNS 819-100-K-13

The Balluff BNS0067 BNS 819-100-K-13 may be considered across numerous industrial sectors where machine position feedback plays an important role in automation and operational reliability.
Industries include:

• Automotive manufacturing
• Component assembly facilities
• Packaging and processing plants
• Material handling operations
• Warehousing automation systems
• Metal fabrication workshops
• Machine tool manufacturing
• Industrial equipment OEMs
• Process industries
• Engineering project installations

Different industries deploy mechanical position switches for different objectives, ranging from motion verification and sequence control to equipment interlocking and operational monitoring.

Operational Considerations

Before selecting Balluff BNS0067 BNS 819-100-K-13, engineering teams should evaluate:

• Available mechanical actuation method
• Mounting accessibility
• Expected switching frequency
• Environmental contaminants
• Vibration exposure
• Maintenance accessibility
• Integration with control architecture
• Required response within machine sequence

Mechanical position switches are often selected when a direct physical indication of movement is preferred over non-contact sensing methods.

Customization Options

Indus Megamart supplies and distributes standard Balluff products. Product customization is not offered for this model.
However, procurement teams can discuss:

• Alternative Balluff configurations
• Compatible sensing technologies
• Suitable replacement models
• Project-specific product selection
• Availability of related automation components

Product Supply & Distribution Capability

Indus Megamart operates as a supplier and distributor of industrial automation products.
Support includes:

• Product sourcing assistance
• Industrial procurement support
• Requirement validation
• Supply coordination
• Project quantity support
• Repeat-order management
• Technical product identification

As a distributor and supplier, Indus Megamart focuses on industrial product availability and procurement assistance rather than manufacturing activities.

Supply Across India

Indus Megamart supports customers across India through its industrial supply network.
Supply support is available for:

• OEM manufacturers
• Industrial plants
• EPC contractors
• System integrators
• Maintenance departments
• Automation solution providers
• Infrastructure projects

Pan-India supply capability helps procurement teams obtain industrial sensing products for planned projects, maintenance shutdowns, and replacement requirements.

How to Choose the Right Balluff BNS0067 BNS 819-100-K-13

Buyer Checklist
Before ordering, verify:

• Required switching function
• Mechanical actuation method
• Machine operating cycle
• Installation space constraints
• Control system compatibility
• Environmental conditions
• Maintenance accessibility
• Replacement interchangeability requirements
• Lifecycle expectations
• Availability of associated automation components

For broader selection guidance, supporting resources such as Mechanical Position Switch Selection Guide and Industrial Position Monitoring Solutions Guide can assist engineering teams during evaluation.

Comparison Table

Industrial buyers often compare mechanical position switches with alternative sensing technologies before finalizing specifications.

Selection should be based on application requirements rather than technology preference alone.

Typical Use Case Scenarios

Scenario 1: Machine Travel Limit Monitoring
A machine builder installs the switch to verify that a moving carriage has reached its intended travel position before initiating the next cycle.
Scenario 2: Automated Fixture Position Confirmation
The switch confirms correct fixture engagement before assembly operations begin.
Scenario 3: Conveyor Transfer Control
Position feedback prevents material transfer until the receiving station is correctly aligned.
Scenario 4: Maintenance Replacement Project
An industrial facility replaces aging position switches during a scheduled shutdown to maintain operational reliability.

Procurement Process

Industrial buyers can follow a structured procurement process:

1. Share product code and requirement details.
2. Confirm application suitability.
3. Verify required quantities.
4. Review availability and lead time.
5. Finalize commercial requirements.
6. Arrange dispatch and delivery.

For procurement assistance, visit:
https://www.indusmegamart.com/contact-us
For company information, visit:
https://www.indusmegamart.com/about-us

Common Buyer Concerns Before Ordering

Buyers frequently evaluate:

• Compatibility with existing equipment
• Installation constraints
• Replacement equivalency
• Operational reliability
• Long-term availability
• Maintenance requirements
• Integration with control systems
• Lead-time planning

Early technical validation helps reduce procurement risks and minimizes installation delays.

Frequently Asked Questions

What does Balluff BNS0067 BNS 819-100-K-13 do?

The product functions as a mechanical position switch that detects the movement or position of machine components and provides switching feedback to control systems. It is typically used for monitoring, verification, and machine sequence control.

Where is Balluff BNS0067 BNS 819-100-K-13 commonly installed?

It is commonly installed on industrial machinery, conveyors, transfer systems, assembly equipment, packaging lines, and automated production systems where mechanical position confirmation is required.

Is this product suitable for PLC-based automation systems?

Mechanical position switches are frequently integrated with PLC-controlled systems. Compatibility depends on the electrical and control requirements of the specific installation.

How is a mechanical position switch different from an inductive sensor?

A mechanical position switch requires physical actuation, while an inductive sensor detects metal targets without contact. The appropriate choice depends on operating conditions and sensing requirements.

Can Balluff BNS0067 BNS 819-100-K-13 be used for replacement projects?

Yes. Many industrial buyers source products from the BNS 819 series for maintenance, retrofit, and equipment modernization projects, provided compatibility has been verified.

What factors should be checked before ordering?

Buyers should confirm mounting requirements, switching characteristics, environmental conditions, machine compatibility, electrical integration needs, and operational expectations.

Does Indus Megamart provide technical procurement support?

Yes. Indus Megamart assists customers with product identification, sourcing support, requirement verification, and industrial procurement coordination.

How can I request pricing for Balluff BNS0067 BNS 819-100-K-13?

Buyers can submit product codes, quantities, and application details through the contact page to receive procurement assistance and availability information.

Request a Quote for Balluff BNS0067 BNS 819-100-K-13

Indus Megamart supplies and distributes Balluff industrial sensing products for OEMs, industrial facilities, contractors, and automation projects across India.
For pricing enquiries, technical discussions, product availability, and procurement assistance, contact the Indus Megamart team.
Contact Page:
https://www.indusmegamart.com/contact-us
About Us:
https://www.indusmegamart.com/about-us