STANLEY 70-947E 17mm Combination Spanner in Kolhapur - 10-Piece Pack

Pack Price, Stock and Kolhapur Delivery

The Indus MegaMart National Product Detail Page displayed ₹637 including 18% GST for a pack of 10 when checked on 26 October 2026. That snapshot comprises ₹540 before GST plus ₹97 GST, equivalent to approximately ₹63.70 per spanner including GST. This is a ten-piece pack price, not the price of one spanner. Use the live price shown on the linked National Product Detail Page for the amount payable at checkout.
At the time of that check, the page showed zero available stock units. Under Indus MegaMart's order-acceptance policy, you can still place an order and complete payment when displayed stock is zero. Delivery is within 7 days when the ordered quantity is within available stock, and within 7–14 days when the order exceeds available stock or stock is zero. Enter your Kolhapur delivery pincode and check the latest order details before payment. The displayed stock number refers to the merchant's inventory system; confirm that the purchasing quantity represents complete packs of ten.

STANLEY 70-947E Specifications

The measurements above are supported by the STANLEY-branded technical sheet linked from the National Product Detail Page and corroborated by multiple industrial sellers. They describe each spanner, not the dimensions or weight of the ten-piece package. The exact bolt-thread designation is not determined by the 17mm head size alone.

Where a 17mm Combination Spanner Is Useful

Equipment and workshop maintenance

The open end is useful when a fastener must be approached from the side, such as when an adjacent fitting or obstruction prevents the ring end from sliding over the head. The ring end is useful when it can be fully seated around a suitable, accessible hex head. This makes the 70-947E relevant for routine manual servicing of machinery, pumps, motors, mounting brackets and other equipment where a 17mm across-flats fastener is actually present.

Fleet repairs and technician tool issue

A 17mm combination spanner can form part of a mechanic's or service technician's general metric toolkit. The ten-piece pack is especially relevant when a purchasing team needs to issue the same size to several users or replace missing 17mm tools in standard maintenance kits. It is not a mixed-size spanner set and does not contain different jaw sizes.

How to Check That This Is the Right Spanner

Confirm the fastener head, not just its thread

Measure the nut or bolt head across its opposite flats. The 17mm opening must fit the fastener properly without excessive play. Do not assume that every bolt with a particular thread designation uses a 17mm hex head: head dimensions can differ by standard, component and fastener design. Avoid substituting a nearby imperial size or working on badly rounded heads with a loose-fitting tool.

Choose the end for the available access

Use the open end when side entry makes it practical to place the jaws correctly. When there is adequate clearance, seat the ring end fully before applying force. If the head is recessed, surrounding equipment prevents safe access or tightening requires a prescribed torque, use a correctly sized socket or calibrated torque wrench instead. This manual combination spanner is not an impact socket, ratcheting spanner or calibrated torque instrument.

Check quantity and procurement requirements

For this exact Indus MegaMart listing, one selling pack contains ten spanners, each marked for 17mm work. Decide how many ten-piece packs the team needs, confirm the live payable amount and delivery pincode, and check the quantity displayed at checkout. For industrial purchasing, confirm any required documentation directly with the merchant rather than assuming certification or special tender approval.

Care and Correct Handling

Use an accurately fitting 17mm fastener, keep the tool square to the contact faces, and do not extend its handle with a pipe or strike it with a hammer. Clean off oil and moisture after use and store it in a dry place. STANLEY's published design information describes an anti-slip open end and a Maxi-Drive feature; these are useful design characteristics, not a quantified torque-capacity guarantee.

Frequently Asked Questions About STANLEY 70-947E in Kolhapur

1. Is STANLEY 70-947E a 17mm combination spanner?

Yes. STANLEY 70-947E is identified as a metric 17mm combination spanner, with an open jaw at one end and a ring head at the other.

2. Does this listing contain one spanner or ten?

Indus MegaMart displays a pack of 10 pieces. All ten pieces are the same 17mm model; it is not an assortment of ten sizes.

3. What is the pack price including GST?

The National PDP showed ₹637 including GST for ten pieces on 26 October 2026, or approximately ₹63.70 including GST per piece. The live payable price may change; check it on the product page.

4. Can I order if the displayed stock is zero?

Yes. Under Indus MegaMart's policy, orders and payments remain accepted at zero available stock, with delivery within 7–14 days. When available stock covers the order quantity, the policy states delivery within 7 days.

5. What is the length of each STANLEY 70-947E spanner?

The STANLEY-branded product specification lists 220mm overall length for each spanner.

6. Will a 17mm combination spanner fit every M10 or M12 bolt?

No. Confirm the actual hex-head or nut size across flats; the nominal thread size by itself does not reliably establish whether a 17mm tool fits.

7. Can this tool replace a torque wrench?

No. The combination spanner supports manual tightening and loosening; it does not measure or control an exact tightening torque. Use a calibrated torque wrench when the assembly procedure requires one.

8. How can a Kolhapur buyer check delivery?

Open the exact Indus MegaMart product listing, enter the destination pincode in the delivery-check field, and review the displayed purchasing quantity and current price before payment.

Buy STANLEY 70-947E 17mm Combination Spanner for Kolhapur Delivery

Check the current GST-inclusive ten-piece pack price, available-stock indication and Kolhapur pincode delivery details, then proceed to the exact product checkout: View price and buy STANLEY 70-947E 17mm Combination Spanner — Pack of 10.