Pilz PNOZ s1 (750101) 24V DC Safety Relay in Jalgaon

Price, GST and Ordering in Jalgaon

The displayed prices and inventory are from the national product listing and can change. Enter the destination Jalgaon pincode and confirm the latest payable total, quantity, GST invoice details and estimated delivery on that listing. For project quantities, ask the seller to confirm the lead time before committing to a shutdown schedule.
Check current price and order the exact 750101 model

Pilz PNOZ s1 (750101) — Technical Specifications

What This Safety Relay Monitors

Pilz describes the PNOZ s1 for monitoring E-STOP pushbuttons and safety gates in a designed safety circuit. Its two safety contacts can be incorporated into a suitably engineered control architecture to interrupt hazardous machine operation in response to the monitored safety condition. The semiconductor output is a separate signal output and must not be counted as an extra safety relay contact.
This module is a component of a safety function—not a complete machine safeguarding solution. The required performance level, detection of faults, contact loading, wiring, restart prevention and validation must be determined from the machine risk assessment and the current Pilz operating manual by qualified personnel.

Compatibility Checks Before Ordering

• Check that the control design requires a 24 V DC PNOZ s1 with single-channel input monitoring; do not assume it is a dual-channel input module.
• Confirm that two N/O safety contacts and one separate semiconductor output fit the safety-circuit design.
• Check contact loads and utilization category; a 3 A AC1/DC1 rating should not be applied indiscriminately to all load types.
• Confirm the 12.5 mm DIN-panel space, 98 mm height, 120 mm depth, suitable enclosure and screw terminal conductors.
• Decide reset/start wiring through the risk assessment and manufacturer manual; do not configure automatic restart where unsafe.

Choosing 750101 Versus Similar Pilz Models

A relay with the same nominal 24 V DC supply or two N/O contacts is not automatically a safe drop-in replacement. Compare the complete part number, terminal configuration, wiring diagram, safety-function requirements and approval documentation.

Jalgaon Supply, Pincode Checks and Project Quantities

Indus MegaMart lists 750101 through its national safety-relay product page and provides a delivery-pincode checker. The listing currently shows one unit and a within-7-day timeframe for orders covered by displayed stock; it shows an estimated 4–6 weeks if the ordered quantity exceeds stock. Treat these as conditional merchant estimates, not a guarantee to every Jalgaon address. Confirm quantity, shipping feasibility, payable GST and fulfilment terms at checkout or by requesting a quotation.
For panel-building or maintenance procurement, record the exact Pilz order number, terminal version, required quantity and intended installation environment in your enquiry. Ask for current product documentation if the project requires compliance records or commissioning support.

Frequently Asked Buyer Questions

1. Is 750101 a 24V DC safety relay?

Yes. Pilz identifies the PNOZ s1 part 750101 as a 24 V DC PNOZsigma safety relay.

2. Does it provide two or three safety contacts?

It provides two normally-open safety relay contacts and one separate semiconductor output. The semiconductor output is not a third N/O safety contact.

3. Can PNOZ s1 750101 be wired as a dual-channel safety input?

The exact manufacturer description identifies one-channel input wiring. Do not infer dual-channel suitability from generic safety-relay information; use the Pilz manual and a qualified safety engineer for circuit design.

4. Does this model have screw terminals?

Yes. Order number 750101 uses plug-in screw terminals. The related 751101 PNOZ s1 C has spring-loaded terminals and is a distinct product.

5. Can I use manual or automatic start?

Pilz lists both start modes. The correct implementation depends on the safety function and restart risk; the operating manual must be followed.

6. Does a listed safety category or SIL rating certify the whole machine?

No. Component safety-characteristic data are conditional and do not establish the achieved safety level of a complete machine. The full safety function needs risk assessment and validation.

7. What is the listed price including GST?

The Indus MegaMart product listing displays ₹18,493 including GST, consisting of ₹15,672 before GST and ₹2,821 shown GST. Check the live product page for final price.

8. Can I order more than one relay for Jalgaon?

The national listing allows quantity-based ordering and currently displays a longer 4–6 week fulfilment estimate when the requested quantity exceeds stock. Confirm the actual quantity and delivery timeline with the seller.

9. Is this an appropriate replacement for another Pilz relay?

Only after confirming the complete model number, input architecture, safety contacts, terminals, ratings, wiring and system risk assessment. Similar model names do not ensure interchangeability.

10. Where can I check delivery for my Jalgaon location?

Use the exact product page’s pincode checker and review the final order conditions before payment.

Buy Pilz PNOZ s1 Safety Relay (750101) in Jalgaon

Ready to procure this exact module? Open the Indus MegaMart listing for Pilz PNOZ s1 750101, verify 24 V DC, two N/O safety contacts, plug-in screw terminals, the current GST-inclusive total and your Jalgaon delivery pincode, then proceed with the exact-model cart or quotation process. For larger quantities or safety-critical replacement jobs, confirm lead time and compatibility before ordering.
Order and check availability