STANLEY STMT87433-8 Adjustable Spanner 250mm Chrome Plated in Indore

Check Price, quantity, and Order STMT87433-8

The exact manufacturer part number is STMT87433-8-the 250mm chrome-finish version. STANLEY identifies one wrench as the contents of its individual product. Manufacturer trade catalogues also list a six-piece minimum order; that catalogue convention must not be mistaken for the number of tools in an Indus MegaMart checkout line. Review the selected quantity and selling unit in your order summary.
Indus MegaMart provides a GST-inclusive product price, GST breakup, quantity selection, Add to Cart and a delivery-pincode checker on its product listing. The payable amount and any applicable delivery charges are determined by the current order, not by a price quoted on another retailer's website.
Check Current Price and Order STANLEY STMT87433-8

Exact Specifications - 250mm Chrome-Plated Adjustable Wrench

The 30mm figure is a jaw-opening limit, not the thread diameter of a bolt and not an approved tightening-torque value. The 410g figure describes one wrench, not a carton of six or its delivery-package weight.

Where the 250mm Length Is Useful

This adjustable wrench can be set to grip different appropriately sized hexagonal nuts and bolt heads, reducing the need to carry several open-ended sizes for occasional jobs. The 250mm handle is a practical option when a compact 150mm tool offers insufficient reach, yet a longer 300mm wrench would be awkward to swing. The right choice still depends on the fastener-head width, nearby obstructions and the equipment's specified tightening method.
Typical tasks include accessible machinery covers, mounting hardware, maintenance brackets, workshop assembly and general mechanical installation. These are use-case examples, not confirmed compatibility with every machine or fastener. The chrome finish helps resist ordinary surface corrosion, while the thumb wheel and scale facilitate initial jaw setting.

How to Check Fit Before Applying Force

Measure the fastener head across its parallel flats. Adjust the jaws until they seat closely against the head and make sure the wrench can turn without hitting adjacent equipment. Apply steady hand pressure, inspect for slipping and stop if the head begins to round. Avoid hammer blows, extension pipes, levering and excessive side-loading; those methods can damage the adjustment mechanism or fastener.
For frequent high-load work on a known size, use a properly fitting ring or combination spanner. If a specified final torque must be achieved, use a calibrated torque wrench. STMT87433-8 is not a torque-measuring tool.

Choosing the Correct STANLEY Model and Finish

The STMT87433-8 is the chrome-plated 250mm model. It should not be confused with the STMT74895-8 250mm phosphate-finish adjustable spanner: equal nominal lengths do not make the two part numbers interchangeable. Check the exact product number in purchase orders and specifications.
This is a smooth-jaw wrench intended for suitable fastener flats, not a toothed pipe wrench for gripping round pipe. It has no ratcheting mechanism and is not an electrically insulated/VDE tool. For electrical work requiring protective insulation or tasks with a controlled torque specification, select a tool expressly rated for that purpose.
A longer spanner does not automatically establish a higher safe working torque or a permitted fastener size beyond the 30mm maximum jaw opening. Compare verified jaw capacities and access requirements—not handle length alone—when considering an alternative.

Delivery and Business Purchasing in Indore

Enter the receiving Indore pincode on the exact product page and verify the address-level delivery information during checkout. A national stock number is not evidence of a warehouse or stock physically situated in Indore.
Under Indus MegaMart's stated order policy, orders and payments remain possible if the requested quantity is greater than displayed stock, including when stock is zero. For an order within available stock, the stated delivery period is within 7 days. If the ordered quantity exceeds available stock or stock is zero, the stated period is 7–14 days. Check serviceability and the final order details for your delivery address.
Purchase invoices contain the company's GST number. Procurement teams should confirm the exact model, tool count, billing GST details and delivery location before paying. For warranty or returns, check the terms applicable to your particular order rather than relying on terms published for another country or marketplace.
Explore the STANLEY tool range, compare other spanners and wrenches, or browse the hand tools category if you need a different size or tool type.

Frequently Asked Questions

1. What is the maximum jaw opening of STANLEY STMT87433-8?

Its manufacturer-branded dimension chart specifies a 30mm maximum opening for the 250mm chrome-plated model. Measure the fastener head across the flats and check that there is enough clearance to seat and rotate the tool.

2. Is STMT87433-8 250mm or 254mm long?

STANLEY markets this part number as 250mm (10 inch). Ten inches converts mathematically to 254mm, but the manufacturer uses 250mm as its nominal model size for ordering.

3. What is the spanner made from, and how much does it weigh?

STANLEY's product chart specifies forged chrome-vanadium steel, a chrome finish and an individual wrench weight of 0.41kg (410g).

4. Is the 250mm chrome-plated spanner the same as STMT74895-8?

No. STMT87433-8 identifies this chrome-plated wrench; STMT74895-8 is a different, phosphate-finish STANLEY model. Check the full part number when ordering a specified variant.

5. Does a six-piece manufacturer MOQ mean I must buy six from Indus MegaMart?

Not automatically. STANLEY's chart lists a six-piece trade MOQ, but the individual product contains one wrench. The actual quantity and sale-unit basis depend on the selected Indus MegaMart checkout offer and must be confirmed in the order summary.

6. Can this wrench measure tightening torque or grip pipes like a pipe wrench?

No. It is a manually adjustable, smooth-jaw open-end spanner for appropriately shaped fastener heads. It does not measure torque and does not have toothed pipe-gripping jaws.

7. Can I place an order if available stock is less than my requirement?

Yes. Indus MegaMart's stated policy accepts orders and payments above available stock, including zero stock. For an order exceeding available stock, the stated delivery window is 7–14 days, subject to serviceability checks for the receiving address.

8. How can I check the current price, GST and Indore delivery details?

Open the exact STMT87433-8 Indus MegaMart listing, review its live GST-inclusive price and tax breakup, confirm the selected number of tools, and enter your Indore delivery pincode. The purchase invoice contains the company's GST number.

Buy STANLEY STMT87433-8 Adjustable Spanner 250mm in Indore

Before checkout, confirm STMT87433-8, its chrome-plated finish, 250mm nominal length, 30mm maximum jaw opening, the selected tool quantity and the delivery address. Follow the exact product listing to check the current payable amount and complete your order.
View Current Price and Buy STANLEY STMT87433-8