STANLEY STMT60814-8 PH3 X 150MM Cushion Grip Phillips Screwdriver in Indore

Confirm PH3 Screw Fit, 150mm Blade and Ten-Piece Quantity

PH3 is a Phillips cross-recess screwdriver-tip size—not a 3mm width, a Phillips PH2 tip or a Pozidriv PZ3 tip. Select it only where the screw head is specified or confirmed as PH3; a mismatched driver can slip or damage the fastener. Size alone does not establish a universally safe torque, and tool choice should follow the equipment or fastener specification.
150mm is the blade length, not the total handle-to-tip length or a guarantee of 150mm usable reach into a narrow opening. Check the shaft, handle and surrounding workpiece clearance when a screw is recessed.
The Indus MegaMart commercial offer is a pack of ten identical STMT60814-8 drivers. Its on-page per-piece calculation is before GST; it is not proof that single-piece checkout is offered. STANLEY's manufacturer's item description includes one screwdriver, whereas different retailers may impose other order quantities.
Review the exact pack and purchase controls.

STANLEY STMT60814-8 Product Specifications

The manufacturer also describes a handle marking to identify the screwdriver-tip profile. A retailer describes a three-sided PP+TPR handle and provides an 184.3mm total-length value, but that figure was not verified by the inspected official STANLEY listing and should not be relied upon as a confirmed overall dimension. If overall tool length is critical, request a model-specific dimensional drawing.

Suitable Uses and Practical Selection

This hand screwdriver can be considered for manual installation or removal of correctly sized PH3 cross-recess screws in mechanical assemblies, serviceable covers, suitable fixtures or workshop equipment. These are conditional application examples: an industry label such as HVAC, switchgear or heavy machinery does not establish the screw profile actually fitted in a particular product.
Seat the blade squarely and fully in an undamaged PH3 recess. Use controlled manual force; if the joint requires a torque setting, consult the equipment maker's instruction and select an appropriate controlled-torque tool. Avoid using the screwdriver as a pry bar or striking tool unless the maker expressly specifies that use.

PH3 vs PH2 — choose by the actual screw recess

PH3 and PH2 are different Phillips tip sizes. PH3 is generally associated with larger matching cross recesses, but it must not be forced into a PH2 screw. The separate STMT60811-8 PH2 × 150mm is a different product, not included in this PH3 ten-piece pack.

Phillips PH3 vs Pozidriv PZ3

Both tip shapes may look cross-shaped, but Phillips PH3 and Pozidriv PZ3 are different profiles. A PZ3 recess requires a matching PZ3 tool. A poorly matched driver can cam out and damage the screw head.

PH3 × 150mm vs PH3 × 250mm

STANLEY lists STMT60816-8 PH3 × 250mm as a separate longer-blade model. A longer blade may be useful for an accessible deeper screw, but it does not automatically fit a confined space: shaft diameter, opening and handle access still matter. The PH3 × 250mm model is not included in the STMT60814-8 pack.

Cushion grip and magnetic-tip considerations

STANLEY describes a soft bi-material handle moulded to the metal bar for grip and control. The regional STANLEY listing specifies a magnetic tip; this can assist with ferrous screws, but not every screw material is attracted to a magnet, and magnetism can be inappropriate near sensitive components. Verify suitability for the particular work area.

This is not a VDE-insulated screwdriver

A cushion grip does not establish electrical insulation or VDE certification rating. This STMT60814-8 is not verified as an insulated live-working tool. Follow electrical isolation, testing, PPE and qualified-personnel procedures, using a separately approved insulated screwdriver when required.

Price, GST, Availability and Delivery for Indore

For Indore delivery, open the exact STANLEY STMT60814-8 Product Page to check the current ten-piece pack price including GST, item quantity, stock counter and the delivery-pincode checker.
Its product page displayed ₹1,522 including GST on 30 October 2026, made up of ₹1,290 before GST and ₹232 at 18%, with 10 units shown available. These are a dated research snapshot, not permanent figures to hardcode into the Indore page. Confirm whether the stock counter measures individual screwdrivers or ten-piece packs before accepting a commercial quantity promise.
Indus MegaMart's stated policy permits ordering and payment even when available stock is zero. For ordered quantities within stock, the displayed delivery window is within seven days. For quantities exceeding available stock, including zero-stock cases, its stated window is 7–14 days.
Check serviceability for the actual Indore delivery pincode and review the live checkout before paying; neither the delivery window nor the Indore destination establishes stock at a Indore warehouse.
The Screwdriver Sets category displays the same SKU with a ₹1,290 card price during the research snapshot, which equals the product page's pre-GST amount; confirm the final GST-inclusive total on the exact product page.
For related tools, browse Screwdrivers & Bits, the STANLEY range or Hand Tools. Choose any alternative size or tool by its own exact model and selling unit.

Frequently Asked Questions

1. Is STMT60814-8 a PH3 or PH2 screwdriver?

It is a Phillips PH3 screwdriver, model STMT60814-8. PH2 is a different profile size and should not be substituted without checking the screw recess.

2. Is 150mm the full screwdriver length?

No. The 150mm figure is the blade length. A separately verified official exact-model full-tool length was not obtained; confirm physical dimensions when access is critical.

3. Does the Indus MegaMart pack have ten different screwdrivers?

No. The inspected seller offer is a pack of ten identical PH3 × 150mm STMT60814-8 screwdrivers, not an assorted PH0–PH3 set.

4. Does STANLEY specify a magnetic tip for STMT60814-8?

A regional official STANLEY listing identifies a magnetic tip for the exact model. The inspected India listing emphasises its chrome vanadium bar and cushion grip. If magnetic screw pickup is essential, confirm the supplied version with the seller.

5. Can I use a PH3 screwdriver on a PZ3 screw?

Do not assume compatibility. Phillips PH3 and Pozidriv PZ3 are distinct recess profiles; select the correct tool to reduce damage and slippage.

6. Is the cushion grip electrically insulated for live work?

No VDE/IEC 60900 insulation rating was established for this model. Cushion-grip material alone does not make a screwdriver suitable for energised work. Follow approved isolation and safety procedures.

7. What material is the screwdriver blade made from?

The STANLEY India product page specifies a chrome vanadium bar. It does not establish a model-specific calibrated torque limit or approval for using the driver as a striking/prying tool.

8. Is the listed Indus MegaMart price for one screwdriver or ten?

The observed GST-inclusive total is for the seller's pack of ten identical pieces. The displayed before-tax per-piece calculation is not a separate verified single-item purchase offer.

9. Can I order the pack when available stock is zero?

Under Indus MegaMart's stated policy, orders and payment remain possible at zero stock. Orders that exceed available stock follow a 7–14-day stated delivery window, subject to the actual pincode and checkout conditions.

10. Is a lifetime warranty guaranteed for Indore purchases?

A regional STANLEY product page shows limited lifetime warranty wording subject to terms, but the exact coverage, exclusions and India seller process must be checked before treating it as a purchase guarantee. Review applicable terms with STANLEY and Indus MegaMart.

Order the Exact STANLEY PH3 × 150mm Screwdriver for Indore

Confirm STMT60814-8, Phillips PH3 screw fit, 150mm blade, the ten-piece selling pack, and the current GST-inclusive price and pincode eligibility.
Then view the exact product and place your Indore order through Indus MegaMart.