STANLEY 70-382E 8x9mm Shallow Offset Bi-Hex Ring Spanner in Delhi

STANLEY 70-382E Price in Haora

Current National Product Detail Page price: ₹649 including GST.
Displayed base price: ₹550 + ₹99 GST @18%.
The current Indus MegaMart listing is for a pack of 10 pieces.
The Haora City Page should display the same live National PDP price rather than maintaining an independently entered city-specific price.
Stock and delivery information should remain dynamic because availability can change before purchase.
Check Current Price & Buy STANLEY 70-382E

What Is the STANLEY 70-382E?

STANLEY 70-382E is a double-ended shallow-offset metric ring spanner with 8 mm and 9 mm ring sizes.
Both ends use a bi-hex, or 12-point, profile. The closed ring fits around a correctly sized fastener head, while the shallow-offset geometry moves the handle away from the fastener plane to provide additional hand and handle clearance.
This configuration is useful where fixed 8 mm and 9 mm ring engagement is required together with moderate clearance around brackets, panels, housings or nearby components.

Key Specifications of STANLEY 70-382E

Why the Shallow Offset Design Matters

A ring spanner positioned very close to a flat mounting surface can leave limited clearance for the operator’s hand or for movement of the handle.
The shallow-offset design raises the handle away from the fastener plane. This can improve access where panels, brackets, housings or adjacent parts would otherwise interfere with normal operation.
The offset is relatively shallow. If a nut or bolt is deeply recessed or the tool must clear a larger obstruction, a deep-offset spanner may be more suitable.

What Does the Bi-Hex 12-Point Profile Do?

The STANLEY 70-382E uses a 12-point, or bi-hex, profile at both ring ends.
A 12-point profile provides more possible engagement positions around a compatible fastener than a six-point ring. This can make repositioning easier where restricted space limits the available handle swing.
Use the 8 mm or 9 mm end that correctly matches the fastener. Do not force the tool onto an incorrectly sized or badly rounded fastener.

Chrome Vanadium Steel Construction

The 70-382E is made from Chrome Vanadium Steel.
CRV is widely used for manual hand tools because it provides the strength required for repeated fastening and loosening work when the correct size and technique are used.
The 70-382E remains a conventional manual ring spanner. It is not an impact-rated tool and it should not be used as a substitute for a calibrated torque wrench.

Where Can STANLEY 70-382E Be Used?

Actual suitability depends on the equipment and fastener specification, but its 8×9 mm configuration can be relevant to:

Mechanical Maintenance

For tightening and loosening compatible 8 mm and 9 mm metric nuts and bolts during inspection, servicing or adjustment.

Automotive and Small-Component Servicing

For applicable smaller metric fasteners where ring-end engagement and shallow-offset clearance suit the assembly.

Workshop Repair

For technicians who repeatedly encounter 8 mm and 9 mm fasteners and require a fixed-size double-ended ring spanner.

Equipment and Panel Assembly

For manual assembly or adjustment work where adjacent components restrict the use of a completely flat tool.

Is STANLEY 70-382E Right for Your Requirement?

Choose this model when the requirement specifically calls for:

• 8 mm and 9 mm metric fasteners
• double-ended ring engagement
• 12-point / bi-hex profile
• shallow-offset clearance
• a fixed-size manual hand spanner
• exact STANLEY model 70-382E.

Confirm the actual fastener size and working clearance before ordering. Do not select the model only because its appearance is similar to another STANLEY spanner.

STANLEY 70-382E vs Other Spanner Types

Compared with an Open-End Spanner

The 70-382E uses closed ring ends rather than open jaws. An open-end design may be preferable where the tool must approach a fastener directly from the side.

Compared with a Combination Spanner

A combination spanner usually provides one open end and one ring end of the same size. The 70-382E provides two ring ends in different sizes: 8 mm and 9 mm.

Compared with a Deep-Offset Ring Spanner

A deep-offset model provides greater separation between the handle and fastener plane. The 70-382E is suited to applications where only moderate additional clearance is required.

Compared with a Ratcheting Spanner

The 70-382E does not use a ratcheting mechanism. Choose a ratcheting model when repeated turning without lifting and repositioning the tool is a specific requirement.

Compared with an Adjustable Spanner

An adjustable spanner can accommodate multiple fastener sizes. The 70-382E is a fixed-size tool specifically intended for compatible 8 mm and 9 mm metric fasteners.

Buying STANLEY 70-382E in Haora

Haora buyers can order the exact STANLEY 70-382E through Indus MegaMart and check delivery serviceability using the destination pincode.
Stock and delivery details should be treated as live commercial information rather than as a permanent Haora inventory or guaranteed-delivery promise.
For larger requirements, confirm:

• exact model 70-382E
• required number of packs
• destination pincode
• current availability
• required delivery timeline
• GST billing requirements
• any applicable procurement documentation.

Indus MegaMart purchase invoices contain the company’s GST number.

Why Verify Model 70-382E Before Ordering?

STANLEY offers multiple shallow-offset ring spanners with different metric size combinations.
For this page, the exact configuration is:
Brand: STANLEY
Model: 70-382E
Product Type: Shallow Offset Bi-Hex Ring Spanner
Size: 8 mm × 9 mm
If another fastener size is required, select the corresponding model instead of substituting a similar-looking spanner.

Frequently Asked Questions

What size is STANLEY 70-382E?

It is a double-ended metric ring spanner with 8 mm and 9 mm ring sizes.

Is STANLEY 70-382E a bi-hex spanner?

Yes. Verified exact-product information identifies it as a bi-hex, or 12-point, shallow-offset ring spanner.

What material is STANLEY 70-382E made from?

It is made from Chrome Vanadium Steel.

What is the overall length of STANLEY 70-382E?

Multiple exact-product sources list an overall length of approximately 195 mm.

What finish does STANLEY 70-382E have?

Exact-product and manufacturer-family research support a matt/matte finish.

Which standard is listed for STANLEY 70-382E?

Exact-product sources list IS 2029.

What does shallow offset mean?

The handle is positioned slightly away from the plane of the ring ends, providing additional working clearance around nearby surfaces or components.

Can STANLEY 70-382E be used on both 8 mm and 9 mm fasteners?

Yes. One end is 8 mm and the other is 9 mm. Always use the end that correctly matches the fastener.
Is STANLEY 70-382E ratcheting?
No. Verified product information identifies it as a conventional double-ended ring spanner without a ratcheting mechanism.

Can STANLEY 70-382E be used with impact tools?

No impact capability has been verified for this model. Use appropriately rated impact tools where impact loading is required.

Can it replace a torque wrench?

No. STANLEY 70-382E is a manual ring spanner. Where a specified tightening torque must be measured or controlled, use an appropriate calibrated torque wrench.

What is the STANLEY 70-382E price in Haora?

The supplied National Product Detail Page currently shows ₹649 including GST for the listed pack of 10 pieces. The live Haora City Page should remain synchronized with the corresponding National PDP price.

Can STANLEY 70-382E be delivered in Haora?

Delivery serviceability should be checked using the destination pincode. Actual delivery timing depends on current availability and required quantity.

Where can I buy the exact STANLEY 70-382E?

Contact us at STANLEY 70-382E