STANLEY 70-375E 24x27mm Double-Ended Open Jaw Spanner in Goa

Order STANLEY 70-375E for Goa Delivery

• Model: 70-375E
• Sizes: 24mm and 27mm
• Selling unit: One pack containing 10 spanners of this same model
• Price: Refer to the current GST-inclusive pack price displayed with this item
• Stock and delivery: Check the available quantity and your Goa delivery pincode before ordering

Orders and payments may be placed even when available stock is below the requested quantity. If the ordered quantity is within available stock, delivery is within 7 days. If it exceeds available stock, or stock is zero, delivery is within 7–14 days. Confirm the applicable delivery information during checkout.
Buy STANLEY 70-375E 24×27mm — Pack of 10

24mm and 27mm Jaw Fitment — What to Check

The two open ends are sized for hexagonal fasteners with 24mm or 27mm dimensions measured across opposing flat faces. The size of a wrench is not the same as a bolt's nominal thread diameter, so measure the actual nut or bolt head before selecting this model. The fixed-size jaws are intended for accessible flat-faced fasteners; a round fitting or recessed fastener may need another tool.
The open-ended profile allows the spanner to approach a fastener from the side when a socket cannot slide directly over it. It is useful for ordinary manual tightening and loosening, not a substitute for a calibrated torque wrench or impact tool.

Key Specifications of STANLEY 70-375E

The 237mm length and approximate weight are published consistently by specialist sellers for the exact 70-375E model. The manufacturer confirms its Cr-V construction, metric configuration and individual-piece identity.

Suitable Applications and Tool Choice

Maintenance of Machinery and Equipment

Use this spanner on accessible 24mm or 27mm hexagonal nuts and bolt heads during planned equipment servicing, workshop assembly or mechanical maintenance. Its two-ended design can reduce the need to change tools when both jaw sizes occur in the same job.

Fabrication, Frames and Mechanical Installations

The open jaw can reach a fastener from the side where access is restricted above or below the joint. Before use, check for full jaw engagement and sufficient clearance to pull the tool safely. The spanner is not intended to be hammered, used with a lengthening pipe or relied on for a specified torque without a suitable torque-control method.

When a Ring Spanner or Socket Is Better

Choose an appropriately sized ring spanner or socket where a fastener needs more surrounding contact, especially if it is stubborn or access permits an enclosed drive. For tasks requiring an accurately controlled tightening torque, use a properly selected and calibrated torque wrench instead of estimating torque from handle length.

Buying a 10-Piece Pack for Workshop or Procurement Use

Indus MegaMart's listed purchase unit contains 10 identical STANLEY 70-375E spanners. This differs from manufacturer product documentation describing one individual spanner and from retailers offering a single unit. Compare any external quotation on the same model, size, quantity and GST basis before evaluating price.
For workshop replenishment or maintenance purchasing, check how many 10-piece packs are needed, the GST-inclusive price for the pack, and the quantity available. Business buyers can use the exact model number on their purchase request to avoid substitution with nearby sizes such as 21×23mm or 25×28mm.
The order's tax invoice includes the seller's GST details. Verify any additional procurement or delivery requirements using the order information available on the National Product Detail Page.

Frequently Asked Questions

1. Is STANLEY 70-375E a 24mm or 27mm spanner?

It has both sizes: a 24mm open jaw at one end and a 27mm open jaw at the other. Match either jaw to the fastener's across-flats dimension.

2. Does one Indus MegaMart order unit contain one spanner or ten?

The listed Indus MegaMart sale unit is a pack of 10 identical spanners. Check the pack and quantity shown on the checkout page before paying.

3. Is STANLEY 70-375E made of chrome vanadium steel?

Yes. STANLEY specifies forged chrome vanadium steel for this metric double open-end spanner.

4. What is the length of this model?

Indian specialist listings consistently report an overall length of 237mm for model 70-375E.

5. Can it be used to tighten a bolt to an exact torque value?

No fixed torque rating is established for this spanner here. For applications requiring a specified tightening torque, use the correct calibrated torque tool and the equipment manufacturer's tightening procedure.

6. What warranty applies?

STANLEY lists a one-year limited manufacturer warranty for the 70-375E model. Coverage and claims remain subject to the manufacturer's warranty terms.

7. Can I order for Goa when the displayed stock is zero?

Yes. Indus MegaMart's ordering policy accepts payment even at zero available stock. Where stock is zero or insufficient for the ordered quantity, the delivery window is 7–14 days, subject to the order's applicable delivery details.

8. How can I confirm delivery for my Goa address?

Enter your delivery pincode and check the delivery information for this exact product before placing the order.

Buy the Correct STANLEY 70-375E Pack

For a 24mm × 27mm metric double open-end tool, select STANLEY 70-375E, confirm the 10-piece pack, review the current GST-inclusive price and check the delivery pincode. Complete your purchase through the product page:
Buy STANLEY 70-375E 24×27mm Double Open-End Spanner — Pack of 10.