STANLEY FATMAX 0-65-224 PH2 x 250mm Phillips Screwdriver in Faridabad

Confirm the PH2 Tip and 250 mm Blade Before Ordering

PH2 identifies the Phillips cross-head tip size. 250 mm is the blade length, not the overall length of the screwdriver. STANLEY specifies an overall length of approximately 412 mm for this model. Verify both the cross-head profile and the available depth and width of the workspace before choosing it.
The tip should seat correctly in a matching PH2 screw head. Do not substitute a PZ2 Pozidriv, flat/slotted, PH1 or PH3 tip simply because the screw appears similar. An incorrect fit can cause cam-out, damage the screw or reduce control.
The manufacturer's product specification describes one individual screwdriver. The current Indus MegaMart offer is presented as a pack of six individual screwdrivers. Review the exact quantity shown in the live order module before checkout.

Product Specifications

When the Long-Blade Design Helps

The 250 mm blade can make the correct PH2 fastener easier to reach inside a cabinet, mechanical assembly or equipment housing when a shorter screwdriver cannot reach the head. The long shaft does not guarantee access through every opening: check the straight-line path, handle clearance and ability to keep the tool aligned with the fastener.
The ergonomic grip and smooth, domed handle end support controlled hand turning during repeated work. Use suitable hand pressure and keep the tip fully engaged. This screwdriver is not a calibrated torque tool, pry bar, chisel or impact driver.

Electrical and Fastener Safety

0-65-224 is not presented as a VDE-rated insulated screwdriver. Do not use it on energised electrical circuits. Where electrical equipment is involved, follow site isolation procedures and use a separately certified insulated tool if the task requires one.
Choose the correct cross-head tip and keep the screwdriver aligned with the screw. Do not force a worn or damaged fastener. Use the applicable equipment manufacturer's installation or maintenance procedure when tightening requirements are specified.

Faridabad Purchase, Pack and Delivery Checks

Before ordering in Faridabad, open the exact product page to confirm the current selling pack of six, number of packs required, live price and GST treatment. Enter the destination Faridabad pincode to check whether service and delivery options are available for your order. Delivery estimates are conditional on seller inventory and fulfilment confirmation.
For maintenance stores, contractor supplies or multi-site procurement, provide model 0-65-224, the required number of individual screwdrivers, the requested number of seller packs, delivery pincode and GST-billing requirements when requesting a quotation. Confirm stock, payment, returns and dispatch arrangements with the seller before scheduling work.

Frequently Asked Questions

1. What is the screwdriver's tip size?

It has a PH2 Phillips tip. Confirm that the fastener is a matching Phillips cross-head screw rather than a Pozidriv or another cross-head design.

2. Is 250 mm the complete screwdriver length?

No. 250 mm is the blade length. STANLEY's product specification gives an approximate overall product length of 412 mm, including the handle.

3. Does model 0-65-224 contain one screwdriver or six?

STANLEY lists one screwdriver as the individual product. Indus MegaMart currently displays a pack of six as its selling unit. Confirm the live order quantity before paying.

4. Can I use this screwdriver with PZ2 screws?

No. PH2 and PZ2 are different tip profiles. Use a suitable Pozidriv tool for PZ2 screws to avoid poor engagement and head damage.

5. Is this tool approved for live electrical work?

No VDE or live-circuit insulation rating has been established for 0-65-224. Do not use it on energised equipment; select a correctly certified insulated screwdriver for work that requires one.

6. What material and handle does it use?

STANLEY India's product specification lists a carbon-silicon steel blade and an ergonomic bi-material handle. The tip is precision-machined, and the handle features identification markings.

7. Will a 250 mm blade reach every recessed screw?

Not necessarily. Check the opening width, screw depth, handle clearance and the ability to approach the screw in line. Long reach alone does not guarantee compatibility with every enclosure.

8. Is the screwdriver suitable for impact driving or exact torque tightening?

It is a manual screwdriver, not an impact driver or calibrated torque screwdriver. Follow the fastener or equipment manufacturer's method when controlled torque or impact tooling is required.

9. How can I confirm price, GST and delivery in Faridabad?

Use the live Indus MegaMart listing and your destination pincode. Confirm the seller pack, current orderable quantity, GST treatment and fulfilment terms before placing an order.

Check the Exact STANLEY FATMAX 0-65-224 Offer

View STANLEY FATMAX PH2 × 250 mm Screwdriver 0-65-224 at Indus MegaMart to verify the PH2 tip, 250 mm blade, selling pack of six, current price, availability and Faridabad delivery options before checkout or a bulk enquiry.