Buy STANLEY 70-391E 25x28mm Shallow Offset Bi-Hex Ring Spanner in Erode

Order the STANLEY 70-391E Pack of Five for Erode

Indus MegaMart's present selling unit is one pack containing five identical 25×28mm spanners—not five different sizes and not a five-piece spanner assortment. Each individual tool has one 25mm ring end and one 28mm ring end. STANLEY also identifies the manufacturer product as an individual wrench; this does not change the merchant's pack-of-five offer.
The STANLEY 70-391E product listing displays the current pack price with GST and the corresponding pre-tax amount.

70-391E Specifications That Matter Before Purchase

What the 25×28mm Measurement Means

The sizes refer to the across-flats dimensions of the fastener head or nut that each ring opening is intended to engage, not the nominal bolt-thread diameter. Check the actual fastener head before ordering. A 25mm ring will not replace a 24mm or 27mm tool, and the 28mm end is not interchangeable with a 30mm opening.

Why Bi-Hex and Shallow Offset Matter

The enclosed 12-point heads offer more engagement positions than a six-point profile when handle swing is restricted. STANLEY lists its Maxi-Drive™ design as helping limit fastener rounding. The shallow offset introduces clearance between the ring and handle for certain recessed or obstructed positions, but it does not offer the same reach as a deep-offset ring spanner. Ensure the tool can fully seat on the fastener without interference.

Suitable Workshop and Industrial Maintenance Uses

This model can be selected for manual maintenance and assembly tasks using accessible 25mm or 28mm hexagonal nuts or bolt heads, such as work on equipment frames, machinery brackets or plant maintenance assemblies. Suitability depends on the actual fastener size, available swing space and the applicable tightening procedure; an industrial application alone does not establish compatibility.

When to Choose Another Tool

For a different fastener size, choose its exact matching spanner. For a fastener deeply recessed below an obstruction, evaluate a deep-offset pattern or a suitable socket instead. This hand spanner is not an impact-socket substitute, a striking spanner or a calibrated torque-measuring device. Where a specified tightening torque is mandatory, use an appropriate calibrated torque tool for final verification. Do not use pipe extensions or hammer blows to exceed normal hand-tool operation.

Erode Delivery, Ordering Quantity and GST Invoice

Before ordering for a Erode workshop, maintenance team or procurement requirement, enter the delivery PIN code on the exact product page and verify the available fulfilment information. Indus MegaMart's standard policy states that orders within available stock are delivered within 7 days. When the ordered quantity exceeds available stock, including when available stock is zero, the stated delivery window is 7–14 days. Confirm the delivery details for your address before payment.
Each quantity selection should be checked against the advertised five-piece pack, particularly for repeat maintenance or institutional purchasing. Indus MegaMart's purchase invoices include the company's GST number. For internal purchase orders, specify STANLEY 70-391E, 25×28mm, shallow-offset bi-hex ring spanner, and the number of packs required.

Frequently Asked Questions

Does STANLEY 70-391E have a 25mm end and a 28mm end?

Yes. The same double-ended spanner has one 25mm ring opening and one 28mm ring opening. Both measurements refer to metric fastener-head sizes.

Is the Indus MegaMart offer for one spanner or five?

The current Indus MegaMart listing is a pack of five identical STANLEY 70-391E spanners. STANLEY's individual manufacturer product listing is separate from this merchant selling unit.

What is the length of the STANLEY 70-391E?

Independent product listings for model 70-391E specify an overall length of 350mm. Measure the working space and available handle movement before selecting it for confined positions.

Will the 70-391E fit an M16 or M18 bolt automatically?

No. Bolt-thread designation alone does not confirm spanner size. Measure or verify the actual across-flats nut or head dimension; it must match 25mm or 28mm.

Is it the same as a deep-offset or open-end spanner?

No. This is a shallow-offset, enclosed bi-hex ring design. A deep-offset pattern offers a different access geometry, while an open-end spanner has an open jaw. Select according to fastener access and required contact.

Can I place an order when the website shows zero stock?

Yes. Under Indus MegaMart's ordering policy, orders and payment remain accepted even at zero stock. The applicable stated delivery window in that situation is 7–14 days, subject to verifying your delivery details.

Does STANLEY provide a warranty for model 70-391E?

STANLEY lists a one-year limited manufacturer warranty for model 70-391E. Coverage and claims remain subject to the manufacturer's applicable terms; check those conditions and retain the purchase invoice.

How do I obtain a GST invoice and order the correct model for Erode?

Choose the STANLEY 70-391E 25×28mm pack, verify the live tax-inclusive price and quantity, check the delivery PIN code and proceed through the exact product page. The purchase invoice includes Indus MegaMart's GST number.

Purchase the Correct 25×28mm STANLEY Spanner

Ready to purchase? View the current pack price and buy the STANLEY 70-391E 25×28mm shallow-offset bi-hex ring spanner.