STANLEY FMMT13094-0 FATMAX 17mm Reversible Ratcheting Wrench in Chennai - Pack of 10

The 17mm Tool for Repetitive Mechanical Fastening

The FMMT13094-0 is a metric combination ratcheting wrench, not an adjustable spanner, a socket and ratchet set, or an impact-rated attachment. The fixed 17mm size is intended for a compatible 17mm across-flats nut or bolt head. Measure the hex head between opposing flat faces before ordering; a bolt's nominal thread diameter alone is not a reliable substitute for checking the wrench opening.
Its open end gives side access when a nut cannot be approached axially, while the ratcheting ring is useful for repeated manual tightening or loosening when the ring can fully seat on the fastener. The low-profile reversing lever lets the operator change the ring's drive direction without flipping the complete wrench over. For workshop issue, the fixed size helps standardize the tool selected for a known fastener.

STANLEY FMMT13094-0 Technical Specifications

Why a 5° arc matters: the 72-tooth mechanism allows small incremental turning movements without lifting the ring end off the nut each time. This can save repositioning steps where surrounding components obstruct handle movement. It does not mean the wrench produces a particular torque value, and the tool must not be treated as a calibrated torque wrench.

Choose the Correct End for the Job

Ratcheting ring for repetitive turns

Use the 12-point box end when it can seat fully around a 17mm fastener and there is clearance to engage the reversing lever. The enclosed ring has multiple engagement positions; its ratcheting action helps with repeated strokes on compatible hex fasteners. Check the direction before applying force and keep the end fully engaged to reduce rounding and slipping.

Anti-slip open jaw for sideways access

The open jaw can approach a 17mm hex head from the side if protruding parts prevent the ring from passing over the fastener. Seat the jaw correctly on the flats. If a nut is heavily seized, use a suitable properly rated tool and controlled technique rather than assuming any ratcheting mechanism supports an unspecified breakaway torque.

Reversing lever and offset clearance

The low-profile direction lever is intended for one-handed changeover, while the 15° head offsets improve hand and obstacle clearance. These features help in engine bays, mechanical assemblies and maintenance workspaces with limited swing space, but users should still verify real access around a particular fastener.

Where the 17mm FATMAX Wrench Fits in Chennai Workflows

In automotive garages, technicians may use the FMMT13094-0 to service accessible 17mm hex fittings on compatible assemblies. Manufacturing maintenance departments can assign a fixed 17mm ratcheting wrench to preventive-maintenance tool boards when repeated manual fastening is required. Equipment installers and workshop mechanics may also benefit from the ratcheting ring where a standard combination spanner needs repeated removal and repositioning.
The tool is only suitable where the actual fastener has a compatible 17mm head and the working area permits secure engagement. It is not intended as an insulated electrical tool, an impact wrench, a torque measuring instrument or a substitute for a different fastener size. Work to the fastener and equipment manufacturer's torque specifications with a calibrated torque tool whenever final torque control is required.

Pack of 10, GST Price and Ordering for Chennai

Indus MegaMart's National product listing identifies this SKU as a pack of 10 pieces. Its indexed price at the 26 October 2026 research snapshot was ₹10,396 inclusive of GST, consisting of ₹8,810 before GST plus ₹1,586 GST; the corresponding inclusive value is ₹1,039.60 per wrench within the ten-piece offer. Prices may change. The current purchase price must match the exact National PDP at the point of ordering rather than a separately maintained Chennai price.
A ten-piece pack can be appropriate for workshop tool issue, fleet service teams, or facilities buying the same size for multiple technicians. Buyers looking for only one wrench should not assume that the Indus MegaMart ten-piece offer can be split; confirm the selling unit shown on the National PDP before payment. Other sellers' single-wrench prices are not equivalent pack prices.
Order and delivery policy: orders and payments are accepted even if displayed available stock is zero. When the ordered quantity does not exceed available stock, the stated delivery window is within 7 days. When it exceeds available stock—or stock is zero—the stated window is 7–14 days. Check the delivery pincode and current checkout information for Chennai; do not interpret a seller's historic stock count as Chennai-held inventory.
For departmental purchasing, record the exact model FMMT13094-0, pack quantity, billing requirements, destination pincode and required delivery date in your purchase requisition. The National PDP is the purchase destination; this Chennai page provides local buying context, not evidence of a physical Chennai warehouse.

Practical Selection Checks Before Adding to Cart

1. Check the head size: verify 17mm across flats, rather than assuming all bolts with a given thread diameter require 17mm tools.
2. Check available swing and reach: the 5° ratchet needs limited rotational travel, but surrounding structures and the tool body still need physical clearance.
3. Check access direction: choose the open jaw if side entry is essential, or the seated ratcheting ring for repeated turns where accessible.
4. Check the quantity: Indus MegaMart's recorded listing is a ten-piece pack; compare quotations on a like-for-like quantity and GST basis.
5. Check suitability: no independently confirmed model-specific torque limit, insulation rating or impact-use approval was established during this research. Use an appropriate specialist tool when those properties are required.

You can also explore the broader STANLEY range and the spanners category for different models, sizes or non-ratcheting designs. For other hand-tool types, visit the hand tools catalogue.

Questions Buyers Ask About FMMT13094-0

1. Is FMMT13094-0 an individual wrench or a set?

STANLEY identifies the manufactured product as a single 17mm wrench. Indus MegaMart's recorded selling offer is a pack of ten individual FMMT13094-0 wrenches. These are different units of description, not different wrench specifications. Verify the live sale unit at checkout.

2. What does 17mm measure on this wrench?

It is the nominal size used to fit a 17mm across-flats metric fastener head. It does not by itself identify the bolt's thread diameter. Measure the nut or bolt head before selecting a tool.

3. How does the 72-tooth mechanism help in confined spaces?

Seventy-two teeth enable approximately 5° of handle movement per ratchet increment. The ring end can remain seated while the handle is moved through repeated short strokes, where surrounding clearance permits.

4. Does the ratcheting ring reverse direction?

Yes. STANLEY documents a low-profile reversing lever for convenient changeover. Confirm the chosen direction before tightening or loosening a fastener.

5. Is the open end also a ratchet?

No. This model combines a conventional anti-slip open jaw with a ratcheting ring end. The ratchet is at the ring/box end; the open end offers side-entry access.

6. Can this wrench be used as a calibrated torque wrench or impact tool?

No such model-specific calibration or impact rating was verified. Use a calibrated torque wrench for specified final torque and a separately rated tool for impact applications.

7. Can a Chennai buyer order if stock displays zero?

Yes. Under Indus MegaMart's first-party order policy, ordering and payment remain possible when available stock is zero. The stated delivery window for zero stock or ordered quantity exceeding stock is 7–14 days; check the delivery pincode when ordering.

8. How should I compare its price with other 17mm wrench listings?

Confirm each seller's selling unit, included GST and current availability. A single 17mm spanner cannot be compared directly with a ten-piece pack by dividing only an advertised pre-tax amount. Compare equivalent quantities and total inclusive costs.

9. What warranty applies to the FMMT13094-0 sold in India?

STANLEY's regional product pages show differing warranty descriptions. Check the manufacturer and seller's applicable written terms for the actual item and purchase region; a specific duration is not being promised here without that confirmation.

Purchase This Exact STANLEY 17mm Model

For accurate model selection, current pack and GST price, delivery-pincode confirmation, and checkout, continue to the exact product listing:
Buy STANLEY FMMT13094-0 FATMAX 17mm Ratcheting Wrench