STANLEY 70-948E 18mm Combination Spanner
The STANLEY 70-948E 18mm Combination Spanner is a fixed-size Chrome Vanadium steel hand tool with an open jaw at one end and a ring at the other. If you need the 18 mm model for maintenance, repair or workshop tool procurement in Bilaspur, confirm the part number 70-948E and check the current 10-piece pack on Indus MegaMart before ordering. Its 230 mm length and open/ring configuration make it practical for routine manual tightening and loosening of correctly sized hexagonal nuts and bolt heads. Review the current pack price, GST breakdown and delivery pincode on the product listing, then continue to checkout for the exact item.
Confirm Your 18mm Spanner and Pack Before Buying
The Indus MegaMart offer is listed as a pack of 10 STANLEY 70-948E combination spanners, each with an 18 mm working size. Check the displayed total pack price rather than comparing it with a single-piece quote from another retailer.
Buy STANLEY 70-948E 18mm Combination Spanner — View Pack Price and Order
STANLEY 70-948E Specifications
|
Specification |
STANLEY 70-948E |
|
Manufacturer / brand |
STANLEY |
|
Model / part number |
70-948E |
|
Product |
Combination spanner |
|
Nominal working size |
18 mm metric |
|
Ends |
Open-end jaw and ring-end |
|
Material |
Chrome Vanadium (Cr-V) steel |
|
Overall tool length |
230 mm |
|
Maximum open-end head width (manufacturer-branded dimensional chart) |
42 mm |
|
Ring-end outside width (manufacturer-branded dimensional chart) |
28 mm |
|
Approximate weight per spanner |
171 g |
|
Finish |
Matt finish; manufacturer-branded chart lists rust/corrosion protection |
|
End-use |
Manual operation on correctly sized hexagonal fasteners |
|
Indus MegaMart sale unit |
Pack of 10 pieces |
How the Combination Design Helps in Maintenance Work
Open End for Access and Repositioning
The open jaw is useful when the tool needs to approach a fastener from the side, including positions where a ring cannot pass over the bolt or nut. Seat the jaws fully on the 18 mm across-flats dimension and avoid using the tool on a rounded or damaged head.
Ring End for More Complete Engagement
The ring end surrounds the fastener and can be the better choice when there is enough clearance to fit it fully. The brand's Maxi-Drive and anti-slip design are intended to improve contact and reduce rounding risk, but they do not guarantee that a damaged or incorrectly sized fastener can be turned safely.
Suitable Applications and Size Selection
The 18 mm STANLEY combination spanner can be useful for workshop maintenance, equipment assembly and service tasks where the fastener head actually measures 18 mm across its flats. It can support an institutional toolroom buying list when the required item is a standard manual spanner rather than a torque-measuring instrument. Verify the machine or vehicle fastener specification instead of assuming every mechanical assembly uses an 18 mm head.
An 18 mm spanner is not a substitute for a 19 mm tool or an inch-size wrench. For bolts with specified tightening torque, use an appropriate calibrated torque wrench to complete the final tightening. This standard combination spanner is not a ratcheting, impact, insulated or non-sparking tool. Do not extend its handle with a pipe or strike it with a hammer.
Ordering and Delivery for Bilaspur Buyers
Check your Bilaspur delivery pincode on the exact product page before placing an order. Indus MegaMart accepts orders and payment even when currently displayed stock is zero. Under its standard order policy, when the requested quantity is covered by available stock, delivery is within 7 days; if the requested quantity exceeds available stock—including when stock is zero—the delivery window is 7–14 days. These timelines follow the store's order policy, and the checkout must confirm delivery serviceability for your address.
For institutional or maintenance-department procurement, confirm the number of 10-piece packs needed against your tool issue plan. For example, a requirement for 20 matching spanners means two packs of ten, rather than 20 packs. Review the live item and commercial terms before payment.
Frequently Asked Questions
1. Is 70-948E the STANLEY 18 mm combination spanner?
Yes. 70-948E is the model number associated with STANLEY's 18 mm combination spanner. It has an open jaw and a ring end.
2. How long is one STANLEY 70-948E spanner?
Its listed overall length is 230 mm, and its approximate unit weight is 171 g.
3. Does Indus MegaMart sell this item individually or in a pack?
The listed Indus MegaMart offering is a pack of 10 pieces. Confirm the product's current pack and price on the purchase page before checkout.
4. Does the current price include GST?
The displayed total on the product listing is marked inclusive of GST, with a separate GST breakdown. The actual payable amount should be confirmed in the live checkout.
5. Can I order the 70-948E when available stock is zero?
Yes. Orders and payment remain accepted under Indus MegaMart's order policy even at zero stock; the corresponding delivery window is 7–14 days.
6. Can this spanner tighten an 18 mm bolt to a specified torque?
It can turn an appropriately sized hexagonal fastener manually. When the job specifies an exact tightening torque, use a calibrated torque wrench rather than treating this hand spanner as a torque-measuring tool.
7. How do I check delivery to Bilaspur?
Enter your Bilaspur delivery pincode on the exact product listing. Check the available delivery information and pack quantity before proceeding with payment.
8. Is an 18 mm combination spanner the same as a ratcheting spanner?
No. This is a conventional fixed-size open-end and ring-end spanner, not a ratcheting mechanism.
Order the Exact STANLEY 70-948E in Bilaspur
Check the 18 mm size, 70-948E model, 10-piece pack, current GST-inclusive price and delivery pincode before confirming your order. You can also browse STANLEY tools, the spanners range and hand tools if you need other sizes or tool types.
Buy Now — STANLEY 70-948E Combination Spanner 18 mm (Pack of 10)
