Buy Pilz PZE 9 774150 24 V DC 8 NO + 1 NC Contact Expansion Module in Delhi

Pilz PZE 9 774150 - Technical Specifications

What This PZE 9 Expansion Module Does

• Eight additional safety contacts. The expansion is driven by an appropriate safety-related base unit and provides eight NO relay contacts to extend the switching capacity of a designed safety circuit. The existing base unit and its feedback monitoring are essential to the overall safety function. The module itself does not independently evaluate all protective devices.
• Auxiliary monitoring without safety misclassification. The ninth contact, 91–92, is an NC auxiliary output for suitable indication or monitoring purposes. The Pilz operating manual explicitly states that this contact must not be used for safety circuits.
• Compatible wiring must be engineered. Pilz supports single- or dual-channel operation with optional short-detection arrangements depending on the chosen base and wiring. The base unit must have a compatible feedback loop. Check the system diagram, terminal assignments, supply and approved application before replacing or adding a module. The device's headline contact current rating is not a universal limit for every load type; qualified engineers must follow the manufacturer's utilisation-category, protective-device and derating instructions.
• Installation and indicators. The unit fits a 35 mm DIN rail and has indicators for power and the two channels. The manufacturer calls for installation in a control cabinet with at least IP54 protection. Installation, commissioning, testing and periodic inspection must follow the Pilz manual and the machine's documented safety assessment.

Buy Pilz 774150 in Delhi: Price, Availability and Delivery

For maintenance, panel assembly or machine-safety retrofit procurement in Delhi, verify the exact 774150 / 24 V DC / 8 NO + 1 NC / fixed screw terminal designation before checkout. Related PZE 9 products can have different supply voltages or plug-in terminal arrangements and should not be substituted by appearance alone.
Indus MegaMart's project order policy permits placing and paying for orders even when the available stock is zero. Where the ordered quantity does not exceed available stock, the stated delivery window is within 7 days; if it exceeds available stock or stock is zero, the stated window is 7–14 days. These are merchant policy conditions, not a confirmed promise for a particular Delhi address. Confirm live checkout acceptance, GST invoice, freight, exact quantity and pincode-specific delivery before paying.

Frequently Asked Questions

1. Is Pilz 774150 a complete safety relay or an expansion module?

It is a PZE 9 contact-expansion module, intended to be used with a compatible safety relay or safety control base with feedback monitoring. It does not independently replace the base safety controller.

2. How many safety and auxiliary contacts does it have?

It supplies eight instantaneous NO safety contacts and one instantaneous NC auxiliary contact. The auxiliary contact 91–92 is not a safety contact.

3. Which power supply is required for part 774150?

The exact part 774150 requires a 24 V DC supply. Do not confuse it with PZE 9 AC-voltage variants such as 774140 (24 V AC) or 774148 (230–240 V AC).

4. Can I use NC contact 91–92 in an emergency-stop safety circuit?

No. Pilz identifies 91–92 as an auxiliary contact and instructs that it must not be used for safety circuits. A qualified machine-safety engineer must verify the complete safety architecture.

5. Does the module have screw terminals or plug-in terminals?

Pilz lists fixed screw terminals for 774150. Some related PZE 9P products use different connection or supply arrangements; compare the exact manufacturer part number before procurement.

6. Will it work with every Pilz PNOZ relay?

Not automatically. A compatible base unit must provide the required drive and feedback monitoring. Use the Pilz operating manual and the installed machine's wiring documentation to confirm suitability.

7. Can it be mounted on a DIN rail?

Yes. The manufacturer specifies a 35 mm DIN rail and suitable control cabinet installation. The housing itself is rated IP40; the manual requires an appropriately protected cabinet.

8. What does the 8 A specification mean?

Pilz specifies up to 8 A for safety contacts in certain AC1/DC1 categories (240 V AC1 or 24 V DC1). Other loads and utilisation categories differ, and the rating does not apply indiscriminately to all contacts or switching conditions.

9. Where can I check the live Delhi price and delivery for 774150?

Use the Pilz PZE 9 774150 national product page to confirm the current Indus MegaMart offer, selling unit, GST treatment, stock-dependent ordering and the delivery availability for your Delhi pincode.
Buy Pilz PZE 9 774150 24 V DC Contact Expansion Module — check live price and Delhi delivery.