STANLEY STMT60821-8 5 mm x 75 mm Slotted Screwdriver in Delhi

Confirm the Exact Item and Pack Before Ordering

STMT60821-8 identifies the exact model. The 5 mm dimension is the slotted-tip width, and 75 mm is the blade length, not the overall screwdriver length. The tip must engage the screw slot securely without being too wide or too narrow.
STANLEY describes the manufacturer item as one screwdriver. Indus MegaMart currently lists a pack of 12 individual screwdrivers. Confirm whether the required order is one seller pack or multiple packs before paying; do not mistake the manufacturer unit for the seller order unit.

STANLEY STMT60821-8 Product Specifications

When a 5 mm x 75 mm Slotted Screwdriver Is Useful

This size can be appropriate for routine mechanical assembly, appliance housings, workshop tasks and equipment servicing where a matching 5 mm slotted tip can be used at a workable angle. The 75 mm blade offers a shorter reach than longer 100 mm, 150 mm or 200 mm variants, but it does not make the tool suitable for every cramped enclosure. Check handle clearance, slot width and available access before choosing it.
The magnetic tip can help hold or locate a compatible screw while positioning it. It does not replace safe support of the workpiece. Use steady hand pressure and keep the tip aligned with the slot to reduce slipping and fastener damage.

Choosing the Right Tip and Blade Length

Choose STMT60821-8 only for a suitable straight-slot screw head. A PH, PZ, Torx or hex fastener needs its own correctly matched driver. If the screw is recessed beyond the practical reach of the 75 mm blade, consider a longer slotted screwdriver with the same appropriate tip width. If the slot is narrower or wider, select the correct blade width rather than forcing a poor fit.

Safety and Working Limitations

This product is not documented as a VDE-certified insulated screwdriver. Do not use it on energised electrical circuits. For electrical equipment, follow isolation procedures and use appropriately rated insulated tools where required. It is not an impact driver, pry bar, chisel or calibrated torque screwdriver. Follow the equipment manufacturer’s fastening procedure and inspect the tip before use.

Ordering in Delhi: Pack, GST and Delivery

Use the exact national product page to verify the current pack of 12, displayed price, GST treatment and stock status. Enter the Delhi delivery pincode for serviceability and the current delivery estimate. A visible stock count or estimated timeline is not a guaranteed dispatch commitment.
For institutional orders, share the exact SKU STMT60821-8, the number of individual screwdrivers required, how many seller packs you need, the delivery pincode and GST invoicing requirements when requesting a quotation. Confirm any applicable returns, warranty support and fulfilment terms with the seller.

Frequently Asked Questions

1. Is STMT60821-8 a Phillips or flat-head screwdriver?

It is a 5 mm slotted / flat-head screwdriver, not a Phillips or Pozidriv driver. Use it only with a matching straight-slot screw.

2. Does 5 x 75 mm describe the overall tool length?

No. The 5 mm is the slotted-tip width and 75 mm is the blade length. The full tool length is a different measurement.

3. Does this screwdriver have a magnetic tip?

Yes. STANLEY lists a magnetic tip for STMT60821-8, which can assist with positioning compatible screws.

4. Is the blade made of chrome-vanadium steel?

Yes. STANLEY India identifies high-grade chrome vanadium in the exact model specification.

5. Is one screwdriver supplied or a pack of 12?

The OEM describes one individual screwdriver. Indus MegaMart currently lists a merchant pack of 12. Confirm the current order unit before checkout.

6. Can it be used on live electrical panels?

No VDE/live-work insulation rating is established for this model. Do not use it on energized circuits; choose a certified insulated tool when required.

7. Is the 75 mm blade good for all recessed screws?

No. Check the screw depth and handle clearance. For a deeper recess, an appropriately longer screwdriver may be needed.

8. Can this screwdriver be used as a pry bar or impact driver?

No. It is intended for manual screw driving. Do not use it for prying, chiselling, hammer strikes or calibrated torque work.

9. How do I confirm price and delivery in Delhi?

Open the exact Indus MegaMart product listing, review the current seller pack and GST-inclusive or exclusive price, and check delivery using the destination pincode.

Check the Exact STANLEY STMT60821-8 Offer

Before buying, verify the model, 5 mm slotted tip, 75 mm blade and pack of 12 on the Indus MegaMart listing. View live stock, final price, GST and Delhi pincode delivery, then place the order or request a bulk quotation.