Pilz PNOZ S4 C Safety Relay 751104 - 24V DC, 3NO 1NC in Bhiwandi

Buy or Enquire for Pilz 751104 in Bhiwandi

Specify manufacturer part 751104, PNOZ s4 C, the 24 V DC supply, the 3NO + 1NC relay contact requirement, spring terminals and required quantity. Request confirmation of the exact selling unit, price with GST treatment, supplier documentation, current stock or lead time and Bhiwandi delivery eligibility before placing a purchase order. This city-focused information does not imply an in-city warehouse or a guaranteed delivery time.

Pilz PNOZ S4 C 751104 – Verified Product Specifications

Understand 3NO, 1NC and the Semiconductor Output

The three normally open contacts are the safety relay contacts. The normally closed contact is an auxiliary contact, while the additional semiconductor output is a separate signal output. These are different output types and must not be counted as five identical safety relay contacts. The switching ratings depend on the utilisation category and electrical load, not on the contact count alone.

Check 751104 Against 750104 and 751184

Part 751104 has plug-in spring-loaded terminals. Pilz 750104 is the related 24 V DC PNOZ s4 version with plug-in screw terminals, while 751184 is the coated spring-terminal s4 C variant. Confirm the installed device label, wiring, cabinet layout, environment and approved replacement specification before selecting another order number.

Applications and Safety-Design Considerations

Pilz identifies suitable emergency-stop, safety-gate and lightguard monitoring, with one- or two-channel configurations and manual or automatic start possibilities. The correct monitoring arrangement, protective devices, feedback circuit and required safety performance depend on the complete machine design. This product page is selection guidance, not wiring instructions or certification of a finished safety function. Use the manufacturer operating manual and qualified safety-engineering review.

Bhiwandi Industrial Procurement Checklist

Before ordering for a Bhiwandi plant, panel builder or MRO project, confirm exact part 751104, 24 V DC supply, three N/O safety contacts, one N/C auxiliary contact, semiconductor output, spring-terminal connection and 22.5 mm panel width. Ask for the seller’s confirmed quantity, invoice, documentation, warranty terms and delivery serviceability. Browse the safety-relay category if the panel design calls for a different approved configuration.

Frequently Asked Questions

1. Which Pilz product does order number 751104 identify?

751104 is the Pilz PNOZ s4 C 24 V DC standalone safety relay with three normally open safety contacts, one normally closed auxiliary contact and a separate semiconductor output.

2. Does the PNOZ S4 C 751104 operate on 24 V AC or DC?

The exact 751104 model requires a 24 V DC supply. Do not substitute a different supply-voltage version without an engineering review.

3. Are all four mechanical relay contacts safety N/O outputs?

No. There are three N/O safety contacts and one N/C auxiliary contact. The additional semiconductor output is a separate signal output.

4. Are terminals spring-loaded or screw-type on 751104?

Pilz specifies plug-in spring-loaded terminals for 751104. The related screw-terminal version is 750104, which has a different order number.

5. What is the difference between 751104 and 750104?

Both are PNOZ s4 24 V DC configurations with similar output arrangements, but 751104 uses plug-in spring-loaded terminals and 750104 uses plug-in screw terminals. Verify the panel wiring and approved bill of materials before substitution.

6. Is 751104 the coated version of the safety relay?

No. Pilz identifies 751184 as the coated PNOZ s4 C 24 V DC version. Part 751104 is the standard spring-terminal version.

7. Can Pilz 751104 monitor emergency-stop and safety-gate circuits?

Pilz lists emergency-stop, safety-gate and light guard monitoring among its intended applications. The actual connection, reset and achieved safety function must be designed and validated by qualified personnel.

8. Does it support single- and dual-channel circuits?

Pilz describes one- or two-channel wiring with selectable cross-short detection options. Use the current Pilz operating manual and a validated machine safety design to select the appropriate configuration.

9. What are the dimensions of the PNOZ s4 C 751104?

The manufacturer lists 100 mm height, 22.5 mm width and 120 mm depth. Verify cabinet clearances and terminal-access space during panel planning.

10. Can I assume every relay output can switch 6 A?

No. The 6 A figure applies to the manufacturer’s stated AC-1 or DC-1 conditions. Other load categories can have lower ratings; verify the manual and connected load.

11. How many units are supplied in a package?

Pilz lists one unit per manufacturer packaging unit. Confirm the actual selling unit and order quantity on Indus MegaMart before purchase.

12. How can I request Pilz 751104 for delivery in Bhiwandi?

Use the exact Indus MegaMart product page and provide the order number 751104, required quantity, panel requirement and Bhiwandi delivery pincode. Confirm live price, GST treatment, stock and lead time with the seller.

Check Pilz 751104 Price and Availability for Bhiwandi

Review the exact Indus MegaMart Pilz 751104 product listing for the current selling unit, GST basis, stock status, lead time and delivery eligibility for your Bhiwandi pincode. Quote the manufacturer part number and confirm the spring-terminal variant before purchase.
Check exact Pilz 751104 listing