STANLEY STHT60501-8B 3 X 50mm Flat Screwdriver in Delhi

Price, Pack Size and Buying Path

The ₹25 figure is a before-GST rate for each screwdriver within a 10-piece pack, not the amount payable to buy one screwdriver. Check the selected quantity, GST, stock and delivery estimate on the national product detail page. Do not assume a one-piece option exists on this listing.
Buy/check live stock and Delhi delivery: Open STHT60501-8B product listing

Technical Specifications

Where a 3 × 50mm Flat Screwdriver Helps

A 3mm slotted tip is intended for a screw head with a compatible straight slot. The shorter blade can be convenient when the fastener is near the front of a housing or on a shallow equipment cover. It does not guarantee access to deep recesses, and it is not a substitute for a torque-controlled screwdriver when a fastener has a specified tightening torque.

• General bench assembly of small slotted fasteners where the tip fits the screw slot.
• Non-energised instrument housings, appliance panels and equipment covers after proper isolation.
• Maintenance toolkits that require a compact flat-head driver for routine low-force service tasks.

Safety note: the standard screwdriver is not presented as a certified insulated tool. De-energise equipment and confirm safe isolation before work near electrical conductors; use the correct rated insulated tool and procedures when electrical protection is necessary.

Choosing Between 3mm Flat-Blade Lengths

Start with the required slot width, blade thickness and fastener accessibility, then select the shortest appropriate length. Longer is not automatically better for every screw head.

Ordering for Delhi Workshops and Procurement Teams

For Delhi purchases, enter the delivery pincode on the exact national product page, confirm that the listing still sells a 10-piece pack, and review the payable GST-inclusive amount. The national listing displayed zero available units during research; any longer fulfilment estimate or acceptance of an out-of-stock order must be confirmed at checkout or with the supplier.
If stocking tools for several technicians, calculate required pack quantities first. For example, 20 screwdrivers correspond to two packs if the seller continues to offer 10 per pack. Do not present this as proof of available stock or a guaranteed dispatch time.

Frequently Asked Questions

1. Is STHT60501-8B a Phillips or flat-head screwdriver?

It is a 3mm flat/slotted screwdriver, not a Phillips or Torx driver.

2. What does 3 × 50mm represent?

The 3mm figure is the slotted tip width, and 50mm is the blade length. The figure does not specify overall tool length.

3. Does the Indus MegaMart price cover a single screwdriver?

No. The observed offer is a pack of 10 priced at ₹295 including GST. The ₹25 per-piece figure is before GST within that pack.

4. What is the GST-inclusive per-screwdriver cost within the pack?

₹29.50 when the displayed ₹295 pack price is divided by 10, before any shipping or checkout adjustments.

5. Is the tip magnetic?

The available product evidence does not establish a manufacturer-confirmed magnetic feature. Confirm with the supplier before ordering if this matters.

6. Can it be used on live electrical terminals?

Do not use it as an insulated live-work screwdriver. Follow isolation procedures and select certified insulated tools where required.

7. Is 50mm suitable for recessed screws?

Only where the blade can properly reach the screw without obstruction. For deeper fasteners, compare compatible longer-blade variants.

8. Which longer versions share a 3mm slotted width?

STHT60502-8B uses 3 × 75mm and STHT60503-8B uses 3 × 100mm; verify the exact selected SKU.

9. Is the item currently in stock?

The national listing displayed zero units during research. Availability is dynamic; confirm the live stock and dispatch conditions.

10. Can I get this screwdriver delivered in Delhi?

Use the national product page pincode checker to confirm shipping eligibility, freight and the estimated fulfilment window for the intended address.

11. Is the catalogue box quantity the same as the merchant pack?

The merchant lists a pack of 10. Other trade catalogues may apply separate box or minimum-order quantities; confirm the seller’s checkout unit before buying.

12. Should I use it for high-torque mechanical work?

No torque rating was verified for this SKU. Select a correctly sized, rated tool and follow the fastener manufacturer’s torque requirements.

Buy STANLEY STHT60501-8B 3 × 50mm in Delhi

Review the current 10-piece pack, GST-inclusive price, Delhi pincode eligibility and fulfilment estimate on the exact product listing. Use Add to Cart if checkout allows the required quantity, or contact Indus MegaMart for a bulk order or stock clarification.
Check live price and order this exact product