BLACK AND DECKER BDHT62298 5 X 100MM Slotted Screwdriver in Belgaum

Confirm the Exact 5 × 100 mm Screwdriver

The 5 mm measurement identifies the nominal width of the flat/slotted working tip. 100 mm is the blade length; it is not the overall tool length or screw-thread diameter. Choose this model when the screw has a correctly matching straight slot and when the required reach and handle clearance are suitable. A poorly fitted blade can slip and damage the slot.
Check the exact model code: BDHT62298. BLACK+DECKER BDHT62296 is a PH1 Phillips screwdriver, while BDHT62299 is a different 6.5 × 150 mm standard/slotted screwdriver. Similar packaging or handle appearance does not make these models interchangeable.

Product Specifications

The product measurements and features above are sourced from BLACK+DECKER's exact-model product information. The pack size is the merchant's separate commercial offer and must not be confused with the number of tools in an individual manufacturer item.

Grip, Blade and Magnetic Tip

The bi-material handle is designed for comfortable hand control. Its three-sided profile can improve grip and help discourage rolling on a work surface. The Cr-V blade is specified by BLACK+DECKER for durability, while the magnetic black-phosphate tip can help position compatible ferromagnetic screws.
These features do not establish a calibrated torque rating or guarantee the tool will hold every type of screw. Keep the flat blade fully seated in the slot, work in line with the fastener and avoid excessive force. If the fastener needs a specified tightening torque, follow the equipment manufacturer's procedure and use suitable calibrated equipment.

Where a 5 × 100 mm Slotted Driver Makes Sense

This tool may suit compatible slotted fasteners in furniture and fixture assembly, mechanical covers, workshop benches, facility maintenance and de-energised equipment servicing. The 100 mm blade offers moderate reach, but the correct tool still depends on the recess depth, screw-head condition and available handle clearance.
It is not intended as a pry bar, chisel, hammer-striking tool or powered impact-driver bit. If the job requires a Phillips, Pozidriv, Torx or insulated screwdriver, select the correct tool rather than substituting this flat-tip model.
Electrical safety: No VDE or live-circuit insulation rating is verified for BDHT62298. Do not use it on energised electrical equipment. Follow appropriate isolation procedures and use properly certified insulated tools when a job requires them.

Ordering in Belgaum: Pack of 12, Price and Delivery

Indus MegaMart currently presents BDHT62298 as a pack of 12 individual screwdrivers. Other retailers may sell individual pieces or specify a 12-piece minimum order. Confirm whether the current quantity field represents packs or pieces before checkout—especially when purchasing for multiple technicians.
Review the seller's live price, GST treatment, available stock and delivery eligibility for your Belgaum pincode on the national product page. A displayed inventory number or delivery estimate is not a dispatch commitment; confirm fulfilment directly when an order is urgent or a precise quantity is essential.
For company purchases, specify BDHT62298, the total number of individual screwdrivers needed, the number of seller packs, delivery pincode and GST-invoicing requirements when requesting a quotation.

Frequently Asked Questions

1. Is BDHT62298 a flat-head or Phillips screwdriver?

BDHT62298 is a 5 mm slotted/flat-point screwdriver. It is not a Phillips driver. Select the screwdriver tip to match the actual screw-head profile.

2. What does 5 × 100 mm mean?

It identifies the 5 mm nominal slotted tip width and 100 mm blade length, not the diameter of the screw thread or the total handle-to-tip length.

3. Does the screwdriver have a magnetic tip?

Yes. BLACK+DECKER specifies a magnetic black-phosphate tip, which can help position compatible steel screws. Performance depends on fastener material and conditions.

4. What is the blade material?

The manufacturer specifies chrome-vanadium (Cr-V) steel for BDHT62298.

5. Does the handle resist rolling?

The manufacturer describes a three-sided handle profile with anti-slip and anti-rolling features. It also uses a bi-material soft grip.

6. Does Indus MegaMart sell one piece or a pack of 12?

The national listing presents a 12-piece seller pack. Some other merchants list individual screwdrivers, and an industry catalogue's MOQ does not prove this seller's checkout minimum. Verify the live sale unit.

7. Can I use BDHT62298 on live electrical circuits?

No VDE/live-work insulation rating has been established for this exact product. Do not use it on energized circuits. Use appropriately certified insulated tools where required and follow electrical isolation procedures.

8. Is this an impact screwdriver or calibrated torque tool?

No. It is a manual slotted screwdriver; no impact-drive or calibrated torque rating is verified. Choose tools designed for those applications when necessary.

9. How does it differ from BLACK+DECKER BDHT62299?

BDHT62298 is a 5 × 100 mm slotted screwdriver. BDHT62299 is a 6.5 × 150 mm standard/slotted model. Match the tip size and blade reach to the fastener.

10. How can I check stock and delivery for Belgaum?

Open the live Indus MegaMart product listing, verify the pack and GST-inclusive total, and check serviceability using your Belgaum delivery pincode. Ask the seller to confirm dispatch if timing is critical.

Check the Current BDHT62298 Offer

View BLACK+DECKER BDHT62298 at Indus MegaMart to confirm the 5 mm slotted tip, 100 mm blade, pack of 12, current price, stock and Belgaum delivery options before checkout or requesting a bulk quotation.