STANLEY 70-942E 12mm Combination Spanner in Ambattur

Buy STANLEY 70-942E — Pack, GST and Quantity

The price shown on the exact Indus MegaMart product listing is for a ten-piece pack, not a single spanner.
Review the current selling price and GST breakdown on the listing. Choose the number of complete packs needed for your maintenance team, toolroom or workshop.
For delivery to Ambattur, use the product page's pincode checker to confirm that the destination is serviceable.
Check Current Price & Buy STANLEY 70-942E

STANLEY 70-942E Technical Specifications

The STANLEY 70-942E is a fixed-size metric combination spanner. Its open end and ring end are intended for correctly sized 12mm hexagonal fasteners.

Detailed Dimensional References

The STANLEY product specification drawing identifies the following dimensions for model 70-942E:

These dimensions correspond to the labelled positions in the product drawing.
If you need to work close to a housing, motor body, guard or other obstruction, compare the dimensional drawing with the actual access available around the fastener.
The nominal 12mm size identifies the intended fastener-head dimension, not the overall width of the tool.

Features and How They Help

Open-End Jaw for Side Access

The open-end jaw allows the spanner to approach a compatible 12mm hexagonal fastener from the side.
This can be useful when a surrounding component prevents the ring end from being positioned over the fastener.
The open end incorporates an anti-slip design. It should still be fully seated against the correct-sized fastener before force is applied.
An incorrectly sized or partly engaged jaw can slip and damage the fastener's corners.

Ring End for More Enclosed Engagement

The ring end fits around the head of a compatible hexagonal nut or bolt.
When there is enough clearance to seat the ring properly, it provides an alternative to the open-end jaw and engages more of the fastener's perimeter.
Use the end that can be positioned securely for the particular task. Avoid turning the fastener when the ring is only partly engaged.

Maxi-Drive Profile

STANLEY identifies Maxi-Drive as a feature intended to help reduce fastener rounding.
For effective engagement, select the correct tool size, seat the head fully and keep the spanner properly aligned with the fastener.
The Maxi-Drive feature does not mean the spanner can compensate for a severely damaged or incorrectly sized fastener.

Chrome-Vanadium Steel and Matte Finish

The tool is made from chrome-vanadium steel and has a matte finish.
The manufacturer describes corrosion-protection features. Normal cleaning and dry storage are still important for preserving the tool's working condition.
These design characteristics do not make the spanner an impact-rated tool, a calibrated torque wrench or an electrically insulated tool.

Choosing the Correct 12mm Fastener

A 12mm spanner is intended for a compatible hexagonal head measuring 12mm across flats.
Across flats means the distance between two opposite, parallel faces of the nut or bolt head.
This measurement is different from the bolt's threaded diameter.

Check the Actual Nut or Bolt Head

Do not choose the STANLEY 70-942E only because a bolt has a particular metric thread designation.
For example, a fastener described as M8 or M10 does not automatically have a 12mm head. Head dimensions depend on the specific fastener standard and design.
Measure the hexagonal head across flats or consult the fastener's technical drawing.
If it is not 12mm, select the correct spanner size.

Check Access Around the Fastener

Before choosing a combination spanner, consider the space around the bolt or nut.
A correct size may still be unsuitable if the fastener is too recessed, the working area is obstructed or there is insufficient room to move the handle.
The 160mm overall length is useful when comparing the tool with the available operating space.
For recessed fasteners, a compatible socket and handle may be more practical.

Avoid Incorrect Imperial Substitutions

A metric 12mm spanner should not be treated as automatically interchangeable with an inch-size wrench.
Where an imperial fastener is involved, select a wrench of the correct across-flats dimension.
Using a loose-fitting substitute can increase the risk of slippage and damaged fastener corners.

Applications of the STANLEY 12mm Combination Spanner

The STANLEY 70-942E is suitable for manual tightening and loosening of compatible 12mm hexagonal fasteners where the fastening procedure permits a conventional hand spanner.

Machinery and Equipment Maintenance

Maintenance teams may use the 12mm spanner on suitable fasteners in accessible machine guards, brackets, mounting assemblies and equipment covers.
Always follow the relevant isolation and maintenance procedure before working on machinery.

Mechanical Assembly Work

In workshops and assembly environments, the combination design can assist with turning compatible small nuts and bolts during fitting, adjustment and routine servicing.
Choose the open or ring end according to fastener access and correct engagement.
If assembly instructions prescribe a particular tightening torque, use an appropriate calibrated torque wrench.

Brackets, Fixtures and Supporting Hardware

The tool may be used for accessible 12mm-head nuts and bolts securing suitable mechanical brackets and fixtures.
The required tool size, tightening procedure and fastener strength must come from the actual component specification.

Maintenance Toolrooms and Technician Allocation

A pack of ten identical spanners can suit organizations that need to issue the same 12mm tool to several technicians or workstations.
It can also help a toolroom maintain a defined quantity of frequently used hand tools.
Determine how many individual spanners are needed, then order the required number of ten-piece packs.

Safe Operation and Tool Limitations

Keep the Spanner Properly Engaged

Make sure the open end or ring end sits fully against the fastener before turning it.
Avoid applying force at an angle or using a tool with visibly deformed jaws or a damaged ring profile.
If a fastener is badly rounded, use the appropriate removal method instead of continuing with an ordinary spanner.

Avoid Hammering and Extension Pipes

The STANLEY 70-942E is a manually operated combination spanner.
Do not strike it with a hammer or add an improvised extension pipe to multiply leverage unless a tool and procedure are specifically designed for that method.
Such misuse can overload the tool or damage the fastener.

Use the Correct Tool for Measured Torque

A conventional spanner does not display or control the amount of torque applied.
Where the equipment manufacturer specifies a tightening value, use the correct calibrated torque wrench.
Do not interpret the spanner's length or steel construction as an approved torque rating.

Electrical Equipment Safety

This model is not identified as a certified insulated tool for energized electrical work.
When servicing electrical equipment, follow approved isolation procedures and use suitably rated tools for the task.

Inspection and Storage

Before use, check for cracks, distortion, excessive wear or damage to the working ends.
Clean the spanner after use and store it in a dry toolbox or tool rack. Replace or remove damaged tools from service.

When Another Spanner Is Better

Not every maintenance task requires the same spanner design.

The STANLEY 70-942E is a fixed-size combination spanner. It is not adjustable or ratcheting.
If you need another size or tool type, explore STANLEY products or browse the Spanners category.

Ambattur Ordering, Stock and Delivery

Select Your Ten-Piece Pack Quantity

The Indus MegaMart listing identifies the sales unit as a pack of ten STANLEY 70-942E 12mm spanners.
One pack contains ten identical tools; two packs contain twenty.
Check the selected model, pack description and order quantity before completing checkout.

Check the Current GST Price

Review the current GST-inclusive pack price and tax breakdown on the exact product listing.
Indus MegaMart's generated purchase invoices include the company's GST number. Ensure the necessary billing and delivery details are entered correctly.

Confirm Ambattur Pincode Serviceability

Enter the delivery pincode on the product page to check whether the destination can be served.
Delivery to Ambattur is conditional on pincode serviceability and the applicable stock-based delivery process.

Delivery When Stock Is Available or Zero

Indus MegaMart accepts orders and payments even when available stock is insufficient or zero.
For serviceable destinations, the delivery policy is:

• Ordered quantity within available stock: Delivery within 7 days.
• Ordered quantity exceeding available stock: Delivery within 7–14 days.
• Available stock is zero: Orders and payments remain accepted, with delivery within 7–14 days.

Stock levels may change. Review the live product information and your selected quantity when placing the order.

Find Other Spanners and Hand Tools

If you need several spanner sizes or a different tool configuration, browse the Spanners range, explore STANLEY, or view the wider Hand Tools category.

Frequently Asked Questions

What is the size of STANLEY 70-942E?

It is a 12mm metric combination spanner intended for compatible hexagonal nuts and bolt heads measuring 12mm across flats.

What is the length of the STANLEY 70-942E?

Its listed overall length is 160mm.

How much does one 70-942E spanner weigh?

The STANLEY technical table lists approximately 0.058kg, or 58g, per spanner.

What material is used in this model?

The spanner is made from chrome-vanadium steel with a matte finish. It includes an anti-slip open-end design and Maxi-Drive profile.

Is the Indus MegaMart listing for one spanner or ten?

It is a pack of ten identical STANLEY 70-942E 12mm combination spanners.

Does the pack contain ten different sizes?

No. Every spanner in the listed pack is the same 12mm model. It is not a mixed-size combination-spanner set.

Will a 12mm spanner fit every M8 or M10 bolt?

No. Bolt thread designation and head across-flats measurement are different. Confirm the actual head measures 12mm before selecting this spanner.

Does STANLEY 70-942E have both an open end and a ring end?

Yes. It is a combination spanner with a 12mm open-end jaw and a matching ring end.

Is the STANLEY 70-942E ratcheting?

No. It is a conventional manual combination spanner, not a ratcheting wrench.

Can I use it instead of a torque wrench?

No. This spanner does not measure or control torque. Use a suitable calibrated torque wrench when a specific tightening torque is required.

Is this tool insulated for live electrical work?

No certified electrical insulation rating has been established for this model. Do not use it as a substitute for suitably rated electrical safety tools.

Can I order the ten-piece pack if available stock is zero?

Yes. Indus MegaMart accepts orders and payment even when stock is zero. For a serviceable delivery address, the stated delivery window is 7–14 days.

How do I buy STANLEY 70-942E for Ambattur?

Open the exact Indus MegaMart product page, review the current GST-inclusive price for the ten-piece pack, select the required quantity, check delivery-pincode serviceability and complete the order using the available purchase controls.

Buy STANLEY 70-942E 12mm Combination Spanner Online

The STANLEY 70-942E is a 160mm chrome-vanadium steel combination spanner with a 12mm open end and matching ring end for compatible metric hexagonal fasteners.
Indus MegaMart offers it as a ten-piece pack for workshop, maintenance and general business purchasing requirements.
Confirm the fastener size, review the current GST-inclusive pack price and check your Ambattur delivery pincode before ordering.
View Current Price & Order STANLEY 70-942E 12mm Combination Spanner